RELIANT CELLULAR RC-5616 Wireless Earbuds User Manual
- June 5, 2024
- RELIANT CELLULAR
Table of Contents
CELLULAR RC-5616 Wireless Earbuds
User Manual
PRODUCT SCHEMATIC
INCLUDED IN BOX
– Earbuds | – Type-C Charging Cable |
---|---|
– Silicone Eartip Covers | – User Mamual |
PAIRING INSTRUCTIONS
BLUETOOTH CALLING
Caller ID| The number will be read aloud
Answer Call| Click the multifunction button while receiving a call
End Call| Click the multifunction button once during a call
Reject/Ignore Call| Double click the multifunction button
MUSIC & AUDIO
Play/Pause| Single click the MF buttons to play/pause
Next Track| Double click the Right Earbud
Previous Track| Double click the left Earbud
Volume +| Press and hold the Right MI buttons for second
Volume –| Press and hold the left MI buttons for second
GENERAL
Turn On/Off| Press and hold MF buttons for 2 seconds/ 5seconds
Activate Siri/Voice Asst.| Triple click the multifunction button
MONO MODE
Turn on only the earbud you wish to use and follow the same steps while
keeping have successfully paired your Earbuds to a Bluetooth-enabled device,
that device will recognize and remember your Earbuds for automatic re-
pairing.
This means that the next time you wish to use your Earbuds with the same smart
device, pairing will happen automatically and without the need to revisit your
device’s Bluetooth display screen.
CHARGING
Insert the EARBUDS into their corresponding charging CHAMBER in the case,
respectively marked L and R. Insert the included Type-C USB charging cable
into the side of the charging case and connect to a power source.
When they have finished charging, earbud LEDs will turn off to indicate they
are fully charged.
When the battery voltage drops to 3.3V, the Earbuds prompt you to “Battery
Low” once every 30 seconds, the Earbuds automatically power off when the
battery voltage is low to 3.0V.
FAQ
Q1: Pairing fails
- Make sure the earbuds and your Bluetooth device are next to each other or within meters and there are no obstacles.
- There are no signal interferences nearby check the question “Connection is not stable for signal interference conditions”.
- Try to reboot your Bluetooth device.
Q2: I paired the earbuds with my phone before, but I failed to pair them
with my phone again.
Turn on the Bluetooth of your phone and in “MY DEVICES”, choose ” RC-5616 ”
and tap “Forget This Device”. Then pair the earbuds with your phone again.
Q3: Power runs out fast The earbud’s playtime varies according to the
volume level and audio content.
Please put the earbuds back into the charging case to avoid unnecessary power
consumption
Q4: The earbuds which are being charged in the charging case reconnect to
my phone.
When the charging case is out of power during charging, the earbuds will
automatically turn on and reconnect to the last paired Bluetooth device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>