behringer UC200 Ultimate Stereo Chorus Effects Pedal Instruction Manual
- June 5, 2024
- Behringer
Table of Contents
behringer UC200 Ultimate Stereo Chorus Effects Pedal Instruction
Controls
- The LEVEL control adjusts the output level.
- The TONE control allows you to adjust the overall effects sound and achieve a more defined and brilliant tone.
- The RATE control determines the chorus effect speed.
- Turn up the DEPTH control to achieve a fuller, deeper effect sound.
- The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the effect.
- Use this ¼” TS INPUT connector to plug in the instrument cable.
- The two ¼” TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve full stereo chorus effect. For mono use just plug in OUT A. Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
Limited Warranty
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty
Specifications
- In
- Connector ¼” TS
- Impedance 500 kΩ
- Out A
- Connector ¼” TS
- Impedance 1 kΩ
- Out B
- Connector ¼” TS
- Impedance 1 kΩ
Power Supply
- Behringer PSU-SB
- USA/Canada 120 V~, 60 Hz
- China/Korea 220 V~, 50 Hz
- U.K./Australia 240 V~, 50 Hz
- Europe 230 V~, 50 Hz
- Japan 100 V~, 50 – 60 Hz
- Power connector 2 mm DC jack, negative center
- Battery 9 V type 6LR61
- Power consumption 30 mA
Physical/Weight
- Dimensions approx. 2 1/8 x 2 3/4 x 4 4/5″
- (H x W x D) approx. 54 x 70 x 123 mm
- Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>