Aisafer Device management tool User Manual
- June 5, 2024
- Aisafer
Table of Contents
Aisafer Device management tool
Device management tool user manual
Notice:
- Please ensure vehicle ACC is ignition on and device is online
- Methods to check if Mobile DVR works normal
- Query photos or parameters by mini program
- Check the auto-diagnostic time mark on mini program first page
- Check if mobile DVR is online and ACC is on by client-end platform
- If photo or parameters queried successfully, please move on.
- When setting parameters, system will automatically query current parameters
- If cannot make sure if parameters set successfully, can query parameters to check.
This manual has 6 pages. If you need any support, please contact us at info @ai-safer.com
-
Step 1. Find wechat mini program by search Device management tool
-
Step 2. Ask your sales person to get an account to log in
-
Input Device ID to find device
You can find Device ID on sticker printing, or scan QR code on sticker, or through external monitor screen and remote control. -
Step 4. Check each channel camera installation position.
-
Step 5. Installation of ADAS camera
-
Step 6. Installation of DSM camera
-
Step 7. ADAS calibration
- Click Calibrate to start calibration.
- Camera height means: distance from camera to ground
- Vehicle width means: Vehicle head width
- Distance from center means: default 0, windshield center
- Distance from bumper means: distance from camera to bumper verticality.
After complete step 7.1, click Hgt CLBR photo to start take photo. Mobile DVR
will speak “start height calibration”, meanwhile mini program will show
countdown, “please wait …s”. When calibration finished, mobile DVR will speak
“ADAS height calibration completed”, otherwise mobile DVR will speak
“calibration failed”.
After finished 7.2, mini program will receive a photo with a red line, which
is to divide sky and road. Move the red line to just the position sky and road
divided, and a little more space for road. The number showing with red line is
point Y. While Point X should stay as default value 960. And then click
submit.
Other functions
Parameters settings.
It is very straight for you to set lots of parameters including server IP&
port, alarm sensitive, device information, etc.
Take photo
Documents / Resources
|
Aisafer Device management
tool
[pdf] User Manual
Device management tool, management tool
---|---