Ensenior B0CRYB57GC 6 Inch Modern Aluminum Recessed Light Fixture User Manual
- June 17, 2024
- Ensenior
Table of Contents
B0CRYB57GC 6 Inch
Modern Aluminum
Recessed Light Fixture
User Manual
B0CRYB57GC 6 Inch Modern Aluminum Recessed Light Fixture
SAFETY INSTRUCTIONS
Ensenior recessed lighting is certified by ETL & FCC & Energy Star (except for GO0OK & 6CCT) of a high standard. This can less LED recessed light is IC rated, with more convenient and secure UL connectors. But to reduce the risk of death, personal injury ot property damage from tire, electric shock and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels, please review instructions carefully before proceeding.
WARNING
RISK OF ELECTRIC SHOCK
- All electrical connections must be in accordance with local and National Electric Code (N.E.C.} standards.
- Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Turn off the switch and circuit breaker before installing this LED light.
- Do not alter, re-locate or remove wiring.
- Double-check all connections to be sure they are tight and correct.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
RISK OF FIRE
- Keep combustibles and other materials that may burn away from lights.
- The maximum ambient temperature is 104°F. Do not operate fixture at temperatures higher than it.
CAUTION
RISK OF INJURY
- The knockouts may be sharp. Wear gloves and safety glasses at all time when removing luminaire, installing or performing maintenance.
- Avoid direct eye exposure to the light source while it is on.
- Wear rubber-soled shoes and work on a sturdy wooden ladder.
RISK OF BURN
- Do not touch enclosure or light source. It is normal of the luminaire surface heating up during work. Allow lights to cool before handling.
RISK OF PRODUCT DAMAGE
- Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be worn during all installation or servicing of the unit.
- Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
- Do not mix our product with other products (including Ensenior light, egg. 4″ and 6″). Mixing junction box of different power will lead to the destruction of the product.
- Do not let the product directly contact with water. Our product is damp-rated but it is not water-proof.
- Do not make or alter any open holes in an enclosure of wiring or electrical components.
- Never connect components under load.
- Please make sure that all wires in and out are wired firmly and sufficiently. If not, there will be a flickering issue or the light will just stop.
- Do not make the product in contact with liquid.
IMPORTANT
- Our temperature has been strictly monitored. But the temperature will be slightly different with varied monitors. Please test them before installation up in the ceiling wall and see the color if it meets your needs.
- If there is anything wrong with our lights, please see the Troubleshooting page. If you could not find an answer in that page, please refer to the Customer Service page and contact US.
ROUTINE MAINTENANCE
- Please make sure the power is off before maintenance.
- To avoid any damage to the product, please do not use any chemical solvents during the routine maintenance.
- To ensure better lighting, please clean the lamp at regular intervals.
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials
for up to 5 years from date of purchase.
if it fails to do so, please contact the Customer Service Team via
service@ensenior.net
STEP -BY-STEP INSTLLATION
TOOLS REQUIRED: Saw, Ladder, Measuring Tape, Electrical Wiring (The wire
should be AWG14-18 for application to connect the fixture), Safety glasses and
gloves.
Notice:
- After the removal of the knockouts (about 0.86 inch diameter) in step No.2, additional cable connectors are needed to secure the wires passing through the knockouts. You could buy the cable connectors as per your need.
- To release the wire ends from the plastic terminals, twist the terminals.
- Cut a hole with 1:1 size of the cutting template.
- Open the junction box and remove knockouts on the side. • Run wire from the power source through the hole.
- Use the connector to tuck the wires according to the color. (If the light is color selectable (CCT), flip the switch on the side of the junction box to locate the setting that you like.)
- Connect (tightly by hand) the junction box to the light panel.
- Put the box in the ceiling hole. Push up the spring clips.
- Push the light into the ceiling and power on.
SPECIFICATIONS
| SPECIFICATIONS | a” | 6″ |
|---|---|---|
| Voltage | 120V | 120V |
| Wattage | ow | 2w |
| Current | 754 | 01A |
| Power Factor | 9 | 9 |
LIGHTING PERFORMANCE
| Lumens | 750LM | 1050LM |
|---|---|---|
| Equivalency | 75W | 10w |
| Color Temperature | 2700K-6000K | 2700K-8000K |
| Color Rendering Index(CR) | >80 | >80 |
| Beam Angle | 120° | 120° |
| Dimmable | Yes | Yes |
| Efficiency(im/w) | 83imjw | 875imjw |
| Trim Color | WHBLK/BNI | WH/BLK/BNI |
ENVIRONMENT
| Operating Temperature | UFOI04°F | 14FI0104°F |
|---|---|---|
| Suitable Damp Location | Yes | Yes |
| Fits Around Joists | Yes | Yes |
| Fits Soffit to Double Drywall Ceilings | Yes | Yes |
CONSTRUCTION
| Housing Material | Aluminums PC | Aluminum +PC |
|---|---|---|
| Weight | 300g | 410g |
LIFESPAN
| Average Life(hours) | 50000+ | 50000+ |
|---|---|---|
| Warranty | 5 years | 5 years |
| Switching Times | >40000 | >40000 |
DIMMER COMPATIBILITY GUIDE
| Model | Feature | Rating | Model | Feature | Rating |
|---|---|---|---|---|---|
| Lutron | FP: Forward Phase Control | RP: Reverse Phase Control | |||
| DVCL-153P(FP) | 3-way, 150W | | PD-BWCLEP)| PD-BWCLEP)|
DVCL-253P(FF)| 3-way, 250W| PD-IONXD(FP)| PD-IONXD(FP)
DVWCL-153PH(Fp)| With Wallplates| P-BDG-PKGIP(FP)| P-BDG-PKGIP(FP)
LECL-153P(F?)| 3-way, 150W| PD-5NERP)| PD-5NERP)
LGCL-153P(FP)| 3-way, 150W| RRD-6NA(RP)| RRD-6NA(RP)
SCL-153P(FP)| 3-way, 150W| MSCL-OPISIM(ER)| MSCL-OPISIM(ER)
AYCL-153P(P)| 3-way, 150W| MSCLVPISIMER)| MSCLVPISIMER)
TGCL-153PH(FP)| 3-way, 180W| DVRP-253P(FP)| DVRP-253P(FP)
CTCL-153P(FP)| 3-way, 150W| MA-PROR?)| MA-PROR?)
CTCL-150H(FP)| Single polef150W| RRD-PRO(RP)| RRD-PRO(RP)
STCL-153P(FP)| Touch, 150W| GT-5NEM(®P)| GT-5NEM(®P)
MACL-153M(FP)| Digital, 150W| CTRP-253P(Re)| CTRP-253P(Re)
MACL-153M-RHM(#P)| Digital, Kit| NTRP-250(gp)| NTRP-250(gp)
MA-PRO(FP)| Digital, Pro| | Zoos
| | | Zen27(FP)| Z-wave Smart
The number of lights that a dimmer can control in one circuit
- 6″ the dimmer rated power (watt) [12watts*75%
- 4″ the dimmer rated power (watt) [watts*75%
CUSTOMER SERVICE
12 hours
QUCIK RESPONSE
If there is any problem with our light, please refer to the Troubleshooting
page on the back. If you still could not fix this, please contact us
immediately. It doesn’t matter if you have installed the product, we will
respond within 12 hours.
The fastest way to he us conhrm the problem is to send us a video of the
problematic light to our official email box.
30-DAV
MONEY-BACK
For 30 days after the date of purchase, return your Ensenior product and
receive a full refund for ANY reason.
5-VEAR
WARRANTY
For 5 years after the date of purchase, if there is any issue with the
product, we will send a new product for free or a full refund. (no need to
return the purchased product)
Under most conditions, we will not require you to return the purchased items.
Sure, if you would return the defective ones) to us, we will be very happy for
that would help us to make continuous improvements.
Free Replacement No Repair
After the buyer purchases the product, if the product has a quality problem
within the scope of the seller’s warranty service within the service validity
period, the seller will replace the buyer with a new product for free.
Friendly Reminder
We sincerely hope to solve the problem for you. We do NOT recommend that you
leave a product rating first, because we cannot obtain your contact
information through the review/feedback, nor can we obtain your relevant
information and provide you with compensation.
Please rest assured that our service aim is to make customers 100% satisfied.
If there is any problem, please contact us as soon as possible, we will not
let you down.
COMMON TROUBLESHOOTING
We are a led manufacturer with 10-year experience and receive feedback from
more than 1000 customers every year. According to our statistics, 95% of
customers’ problems are related to the method of installation and the use of
dimmer, which could be solved by customers themselves. To save your valuable
time, please read this introduction first to quickly identify the cause, if
you encounter any problems.
Problems you may encounter
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Unlit | the wire falls off loosens | breaks |
wire.
Plug the wire hard into the hole of the plastic ‘connector ill the wire end
sticks out of th inside metal clip end.
If the wire s too thick, peel off the wire cover at least 10mm to make sure
the wire is inserted firmly.
the connector is missing or the connector lacks metal shrapnel| Double check
the connector.
voltage is too high| Install the lights on 120 volts.
Dim| the wire falls off/ loosens/ breaks| Double check the connection of the
wire.
not setting the dimmer right| Double check the setting.
mix the junction boxes (4″ and 6″)| Refer to the label info attached to the
junction box to distinguish 4″ and 6″ junction boxes Check the wattage, 9W for
4″ and 12W for 6″.
compatible dimmer, but too many lights.
connect to one dimmer| Reduce the number of lights connected to the one
dimmer.
(Total Power of the Lights=75% of the Rated Pouer of the Dimmer)
total brightness of the lights/house area: too small| Install more lights.
Recommended spacing for installation of 4″ lights: 2-4ft (6″:5-7ft)
Flickering| the wire falls off loosens breaks| Double check the connection of
the wire.
not setting the dimmer right| Double check the setting,
mix the junction boxes (4″ and 6″)| Refer to the label info attached to the
junction box to distinguish 4″ and 6″ junction boxes.
Check the wattage, 9W for 4″ and 12W for 6″,
(x) incompatible dimmer| Select a dimmer from the recommended dimmer its.
(V)compatible dimmer, but too
many lights connect to one dimmer| Connect fewer lights to the one dimmer.
(Total Power of the Lights=75% of the Rated Power of the Dimmer)
high-power electrical appliances on the same circuit| Remove and set them
further away from each other.
Buzzing noise from dimmer/junction box/
circuit breaker(>20Db)| (x) incompatible dimmer| Select a dimmer from the
recommended dimmer list.
() compatible dimmer, but too many
lights connect to one dimmer| Reduce the number of lights connected to the one
dimmer.
(Total Power of the Lights=75% of the Rated Power of the Dimmer)
(x) incompatible circuit breaker| A. Mechanical circuit breaker: replace a
compatible dimmer.
B. Electronic control circuit breaker: replace the circuit breaker first.
high-power electrical appliances on the same circuit radio, air conditioners,
refrigerators, etc.)| Remove and set them further away from each other.
CONTACT US
Contact US
Contact by “Ask a question” on the “Ensenior” Seller Page.(7x24H)
Because Amazon’s information system sometimes can‘t successfully receive and
send information, in which case you may not receive our response. We will
never be able to reply to your inquiry. If you find that we have not responded
to you within 24 hours, please send us an e-mail. Contact via Email:
service@ensenior.net(7x24H)
Rewarding
Scan the QR code to fill the form, you will get 1 Free EXTRA YEAR Warranty.
You also get the chance of participating our FREE PRODUCT TRIALS and getting
Coupon!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>