media BM05 baby monitors User Manual
- June 5, 2024
- Media
Table of Contents
media BM05 baby monitors User Manual
About this manual
We have tried our best to ensure that the contents of this manual are correct and latest. However, there is no guarantee that everything is correct. If the contents of this manual do not conform to the current product, please follow this product. We reserve the right to change the content or technical specifications without prior notice. If the accessories do not match the items in the actual package, please follow the actual package.
Instructions for the use of baby monitors
Thank you for buying our products, This manual provides you the monitor information and methods of using the monitor.
- Safety instruction
- this baby monitor is not a substitute for responsible adult supervision.
- this product shall be placed in a place that is not accessible to the baby and shall be kept in a distance of at least 1.5 m from the baby to ensure that the baby has a corresponding safe range with the product.
- DC power should not be placed where baby can touch, avoid to wind the child’s body parts and cause baby safety problems.
- this product is not a toy and children are not allowed to play with it.
- use the correct power adapter: output 5V/1A
Product appearance introduction
The camera end
- camera
- microphone hole
- infrared sensor
- infrared lamp
- indicator
- speaker hole
- antenna
- temperature sensor
- DC power supply interface
- bracket position
- code button
Handheld display terminal
- antenna
- on/off button
- camera switch button
- menu/return
- direction button
- confirm button
- music button
- intercom button
- display screen
- microphone hole
- speaker position
- bracket
- DC power supply interface
- battery cover
- reset button
Button introduction
-
On/off button Long press: monitor is turned on or off Short press: the LCD screen turns on / off when the power-on .
-
Confirm button: implement the execution instruction of the menu.
-
Menu/PTZ Short press: menu on or off Long press: PTZ control on and off, and then use the arrow keys to control the camera rotation
-
Direction button(up/down/left/right)
Preview interface: Short press the up and down keys to increase the volume, short press the left and right keys to increase and decrease the screen brightness Menu interface: Menu selection function PTZ interface: Use the arrow keys to adjust the camera angle -
Intercom key: In the preview monitoring interface, long press the intercom key to make a call, at this time the camera can hear the sound of the monitor
-
Camera switch button: Short press the switch button to switch between different cameras in the preview monitoring interface
-
Music key: Short press the music key on the monitor screen to switch between different music. Each press can switch one song, a total of 4 songs can be selected, at the same time can switch to loop playback, stop playing music function.
-
Reset button: shutdown reset function, when the machine crashes or cannot be shut down by pressing the shutdown button for a long time, please use a suitable thickness object to lightly press the reset button
-
Code button: When adding a camera to the display, short press the code button on the camera to pair with the corresponding display and add it to the corresponding display
Function introduction
- Camera
- Power supply: Output: DC 5V 14.12Working state: Connect the power supply to the device, and the blue LED indicator lights up, indicating that the machine has been turned on and is in working state.
- Night vision: This product is equipped with 8 infrared lamps, which are used to fill light in a dark environment, so that users can obtain clear images.
- Turning on and off the infrared lamp: The infrared lamp can be turned on and off automatically by detecting the ambient brightness in the power-on state, without any operation by the user.
- If the image or sound effects are not ideal, try moving the device to a different location to get the best results.
- Pairing is required for the first use, and only after successful use. For details on pairing, see 4.31 Camera Matching Method.
- Camera angle adjustment: Adjust the viewing angle through the direction keys, long press the menu key to enter the camera angle adjustment interface, and then use the direction keys to adjust the viewing angle of the camera. After the adjustment is completed, you can exit the camera angle interface by long pressing the menu key, and it will automatically exit this interface after 10S without any operation.
- Handheld monitor
- The product is powered by a built-in battery or a 5V / 1A DC adapter. The built-in battery can be automatically charged when connected to a DC adapter.
- Power on / off: Turn on the power to the device, long press the on / off key for 1.5 seconds to achieve power on / off.
- This machine supports two cameras for loop monitoring.
- The monitoring screen displays as shown below
The signal strength icon shows the current signal strength.
The temperature icon shows the temperature at the camera end.
Lullaby icon, 1 means the first lullaby.
The mute icon indicates that the display is muted.
Night vision icon, the camera is in a night environment.
The voice control icon controls the function of automatically lighting the
screen by judging the size of the sound. There are 3 levels in total. The
higher the gear, the higher the sensitivity, and the lower the sound required
to control the screen.
The time icon shows the current time.
Feeding reminding icon to remind feeding when the set time is reached.
The current camera icon (you can press the camera switch
key to switch, 1 means camera No. 1 ,2 means camera No. 2).
The microphone icon shows that the display is in a call.
The power icon shows the current power status.
Direction indication (4): PTZ interface, different directions reflect the
rotation direction of the camera
Disconnected icon, the current camera is disconnected.
Menu
The menu options are shown below
Press the Menu / Back key to pop up the menu, which contains 6 items:
Camera
Lullaby
Feeding reminder
Volume
VOX
Other settings
You can press the left and right keys to switch options, press the up and down keys to select, then press the confirm key to confirm, and press the menu / back key to exit the setting menu.
Camera
Select the camera settings and enter the following menu:
The functions of each icon:
Cyclic automatic camera switching
Camera angle selection: After selection, there are 3 viewing angles for
selection: camera 1,camera 2, and split screen display, that is, camera 1 and
camera 2 occupy half of the left and right screens respectively.
Camera matching: It can match 2 cameras.Once match successful, it can be
automatically saved, and there is no need to match again the next time it is
turned on. If you need to rematch, you must delete the camera first, and then
you can only match again after the deletion is successful.
Matching instruction
-
Menu return button → Camera setting → Camera matching →Select
the camera 1 (or camera 2) that has not been matched → Confirm.At
this point, the blue indicator light on the Display End flashes,
indicating that the camera is being searched. -
Long press the matching code button of the camera. When the
indicator light on the camera starts to flash, let go and wait for the
automatic matching of the machine. -
An image appears on the display and automatic matching is complete.
Note: The“”icon will appear in the upper right corner of the camera with
a successful match, and the“”icon will disappear when the camera is deleted.
Delete the camera: Delete the camera that has been successfully matched.
Lullaby selection
Select the music settings, a total of 6 modes, namely: turn off music, track
1, track 2, track 3, track 4, loop playback, you can also press the shortcut
key “music key” to quickly set.
Feeding reminder
Select the feeding reminder setting, 5 clock modes to choose from: turn off
reminder function, reminder every hour, reminder every 2 hours, reminder every
3 hours, reminder every 4 hours Select one of them and press the confirm key.
Volume
Select the sound setting option and press the up and down keys to freely
adjust the sound of the display. The mute icon appears when the sound is
muted.
Voice control
Trigger the control to light the screen by the size of the ambient sound.
Switch to the voice control setting, a total of 4 modes are selectable, from
bottom to top are closed voice control, low sensitivity, medium sensitivity,
high sensitivity. The higher the sensitivity, the smaller the sound can be
detected, that is, the screen can be lit when a very small sound.
Other settings Select other settings, the menu as shown in the figure appears:
The functions of each icon :
Screen brightness adjustment. The brightness can be adjusted by the up and
down keys.
creen time setting. The screen time can be set to 1 minute, 3 minutes, 5
minutes, off.
Time setting
Temperature unit setting. The switchable temperatureunits are Celsius and
Fahrenheit.
Anti-flash mode setting, set different frequencies 60Hz, 50Hz
Installation
- Put the TX camera on the working table at the corresponding height. where the baby can be monitored , and adjust the angle of TX camera.
- Fixed on the wall with a three-foot bracket and adjust the angle.
Maintenance of the monitor
- Lens maintenance and cleaning: Please do not touch the lens with your hands or other dirt to ensure the picture is clear and bright. When the lens is dirty, wipe it gently with clean gauze.
- Product surface cleaning: Wipe the body and LCD display regularly with a clean, soft gauze.
- Product disassemble: Please do not open the machine or repair it yourself.
- Keep dry:Please do not use the product in a humid environment, otherwise it may cause product failure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>