Shenzhen 1mii Technologies ML200 Wireless Audio Receiver User Manual
- June 5, 2024
- Shenzhen 1mii Technologies
Table of Contents
Wireless Audio Receiver ML200 User Manual
Model: ML200
In the Box
A. Bluetooth adapter
B. 5V power cable
C. 3.5mm to RCA cable
D. User manual
Product Description
Installation diagram
1. Plug
3. Pair
Sound effects select
Press the button to achieve Bass sound effects,
the LED light will change to green.
Application scenario It can turn all wired speakers into Bluetooth ones. Enjoy wireless music, free of harassment from any wires or cords.
Instructions for operation
- Connect your speaker to the ML200 audio out port with the audio cable provided (3.5mm/RCA cable).
- Press the buttons to power on.
- Pairing – Pair ML200 with your Bluetooth-enabled phone/PC/tablet. • Set ML200 into the pairing mode, the LED flashes blue / Red alternately fast. — First-time use: ML200 will auto-enter the pairing mode (with clear memory). — Afterward: Long press button to enter the pairing mode. (The LED flashes blue / Red alternately fast) • Activate Bluetooth on your phone or another device and click “ML200” to connect. • Wait for the connection (For quick pairing, better keep both devices within 1 meter when pairing).
- Enjoy your music.
Long press
the button to enter the pairing mode. The blue and red LED will flash.
Activate Bluetooth on your phone and click “ML200” to pair.
Pair and connect two devices simultaneously:
- Pair with the first device by following the previous instructions in the “Installation diagram” section.
- Pair with the second device.
• Long press button to enter the pairing mode again. the LED will flash Blue and Red.
• Activate Bluetooth on the second device and click “ML200- to pair.
Note: You can only play music on one device at a time, therefore, if you want to play music on the second device, you need to pause the music on your first device before you play it.
Charging method
-Plugin the charging cable to charge the receiver, the LED runs in steady red. When the battery is fully charged, the indicator will off.
Reset device
If the receiver cannot be connected or work properly, please refer to the
following method to reset the device: press and hold the multi-function button
for 10 seconds, the lights flash purple alternately 3 times, Then restart the
device, clear the device’s connection record, reset successfully.
Product Parameters:
- Model Number. ML200
- Product Name: Bluetooth Receiver
- Bluetooth Version: 5.0
- Operational range: indoors: up to 50-70ft (without obstacles) outdoors: up to 164ft (without obstacles)
- Input voltage/ current: DC5V= 500mA
- Charging time: About 2.5 hour
- Working duration: About 12 hours
- Operating temperature: -10°C – 45°C
- Storage temperature: -20°C – 60°C
- Product size: 60k54k23mm
- Product weight: 35g
Warranty
service is limited to normal use. Any man-made damages such as from connecting
to an unsuitable power source, using an unsuitable device, or not following
the instructions, as well as damages that did not occur during shipping,
repairs and adjustments not approved by the company, damages from misuse,
inattention, or improper installation may cause the warranty to be ineffective
immediately. This warranty does not include shipping fees.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and(2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help NOTE 2:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The device has been evaluated to meet general RF exposure requirements The
device can be used in portable exposure conditions without restriction
https://1mii.com/download-2/
Scan the code to get more language instructions.
Any questions? Contact:
[email protected] (Response Time:4-24h, excl.
holidays)
MANUFACTURER Shenzhen 1Mii Technologies Limited.
FCC ID: 2AUFR-RT211
WWW.MII.COM MADE IN CHINA