Glide Gear OH 75 Overhead Camera Rig Mounting System User Manual
- June 17, 2024
- Glide Gear
Table of Contents
Glide Gear OH 75 Overhead Camera Rig Mounting System
Product Information
Specifications:
- Features: Pin Post, Track Clamps, Camera Mounting Plate
- Pin Post: 2x Male junior/female baby Pin Posts
- Track Clamps: 2x Track Clamps
- Camera Mounting Plate: 1x Camera Mounting Plate
- Track Clamp Compatibility: Rails with a diameter between 1 and 2 inches
Product Usage Instructions
Setup:
- Mounting the Pin Post/Track Clamp:
- Option 1: Screw one of the Pin Posts into the Track Clamp.
- Option 2: Unscrew the Pin Post from the Track Clamp and directly mount the Track Clamp onto a tripod with a 1/4-20 male mounting option.
- Attaching the Rail:
- Slide the rail in between the Track Clamp as shown in Fig. C.
- Ensure the rail is securely in place.
- Mounting the Camera Mounting Plate:
- Slide the rail in between the two clamps on the Camera Mounting Plate as shown in Fig. D.
- Make sure the clamps firmly hold the rail.
- Attaching the Second Track Clamp:
- Attach the other end of the rail to the second Track Clamp.
- Ensure the rail is securely held by the Track Clamp.
- Mounting the Camera:
- Mount the camera onto the Camera Mounting Plate.
- Ensure the camera is securely attached.
- The setup should resemble Fig. E.
Setup
- The OH 75 features:
- 2x Male junior/ female baby Pin Posts (Fig .A)
- 2x Track Clamps ( Fig . A)
- 1 x Camera Mounting Plate (Fig. B)
- NOTE : – Each Pin Posts comes already screwed into the clamp but can be easily unscrewed for alternative mounting options
- Track Clamps can accommodate rails with a diameter between 1” and 2”
- WARNING : the OH 75 does not include any rails.
- 2x Male junior/ female baby Pin Posts (Fig .A)
- Mount one of the Pin Post/Track Clamps to a light stand as in Fig. C.
- Alternatively , unscrew the Pin Post from the Track Clamp and mount the Track Clamp directly onto any tripod with a 1/4-20 male mounting option.
- Slide the rail in between the Track Clamp as pictured in Fig C.
- Mount the Camera Mounting Plate by sliding the rail in between the 2 clamps on the Camera Mounting Plate as in the picture in Fig D.
- Attach the other end of the rail to the second Track Clamp.
- Mount the camera onto the Camera Mounting Plate. The setup should look like in Fig. E
For more information please visit our website: www.glidegear.net
FAQ’s
What is the maximum diameter of the rails that the Track Clamps can accommodate?
The Track Clamps can accommodate rails with a diameter between 1 and 2 inches.
Can I mount the Track Clamp directly onto a tripod?
Yes, you can unscrew the Pin Post from the Track Clamp and directly mount the Track Clamp onto any tripod with a 1/4-20 male mounting option.
Does the OH 75 come with rails?
No, the OH 75 does not include any rails. Rails need to be purchased separately.
Where can I find more information about the product?
For more information, please visit our website:
www.glidegear.net
Is there a user manual available for the OH 75?
Yes, you can find the user manual for the OH 75 at https://manual-hub.com/