PAPIFEED CAM1080 Automatic Pet Feeder User Manual

AUTOMATIC PET FEEDER
User Manual

Please read this manual carefully and keep it for future use

Daily Feeding

(dog) weight| Normal activity Increase| (dog)
weight| Normal activityIncrease
---|---|---|---
2kg| 39g| 45g| 8kg| Illg| 128g
4kg| 66g| 76g| 10kg| 131g| 152g
6kg| 89g| 104g| 12kg| 1509| 174g
| | |
(dog)
weight| Norma activity        Increase| (dog)
weight| Norma activity        Increase
14kg| 178g| 206g| 235g| 20kg| 233g| 2709| 3079
16kg| 197g| 228g| 259g| 22kg| 250g| 290g| 329g
18kg| 197g| 228g| 259g| 24kg| 267g| 309g| 351g
| | |
(dog)
weight| Norma activity   Increase| (dog)
weight| Norma activity Increase
26kg| 274g| 318g| 361g| 36kg| 350g| 405g| 461g
28kg| 290g| 336g| 381g| 38kg| 364g| 422g| 480g
30kg| 305g| 353g| 402g| 40kg| 379g| 439g| 496g
32kg| 320g| 371g| 422g| 42kg| 393g| 455g| 517g
34kg| 335g| 3889| 441g| 44kg| 4079| 471g| 5359
(cat)| | | | |
---|---|---|---|---|---
Month| 1-2| 2-4| 4-6| 6-8| 8-12
Suggest| 20-30g| 30-509| 50-70g| 70-80g| 80-90g
(cat)
weight| 2-3kg| 3-5kg| 5-7kg| pregnancy| Lactation
period
---|---|---|---|---|---
Suggest| 25-35g| 35-55g| 55-85g| 70-110g| 120-190g

Component Breakdown

Product Specifications

Packing List

Product Hardware Assembly Steps

1. Follow the instructions (picture 1) to disassemble or assemble the feeder. Note: When installing a food funnel
   •Please pay attention to the direction of the impeller, the impeller cannot be placed in the center (picture 1)
   •The inlet (backward) should be opposite to the outlet (picture 2)
   •Base, splitter, food bowl should be installed first and then put on the feeder (picture 3).

2. Connect with external power and put in the battery (dual power supplies are recommended). When the power is connecting, if there is a battery in it you need to take it out, press and hold the [MIC] for recording 10s; the [PALM] can check the recordinghttps://papifeedpet.com

3. filling food. Pour in the dry pet food, dose the lid and lock the safety lock

4. Install Velcro and start setting up the feeder.

Description of Buttons and Indicators

Note:

• Single press ( + ) to manually dispense food.
• The product is only suitable for a 2.4G network (5G network can not be connected).
• Battery power is only for emergency use in case of power failure, please ensure a dual power supply for normal use.
• Make sure the feeder and home WiFi are connected, the distance between the two should not be too far apart.

In good working order—Led Indicator Notice:

App Download and Use Steps

• Software Download and Installation

1. Scan the QR code to download the Smart Life APP.
2. Turn on Smart Life APP and register your application account.

Play(Android),Or App Store(iOS). Download and install the app by searching “Smart Life” on Google.

https://smartapp.tuya.com/smartlife

Connect the Device

• Connect the Device (turn on Bluetooth auto—connect)

1. Turn on the phone WiFi and Bluetooth.
2. Login to Smart Life app and refresh the page.
3. Select the device you want to add.
4. Enter the 2.4G WiFi network and password (the device does not support a 5G network) .
5. Wait for the device to be connected, click “Next”.
6. Finally, click the “Finish” button in the upper right corner to enter the feeding page.

• Set A Reasonable Feeding Time
  Feeding Settings: You can continuously set a daily feeding schedule for your pet.

Note: The function consumes a lot when battery-powered, and the working time only lasts 20-24 hours, so it is more energy-saving to use a dual power supply.

• Troubleshooting Tips
  1. Please connect the external power supply before downloading the program.
  2. Support 2.4GHz signal, not 5GHz signal.
  3. The distance between feeder and home WiFi should not be too far, make sure both can be connected.

Product Disassembly & Cleaning

Q&a Trouble Shooting

Q: Why I can not connect to WWI?
Please check if the power supply has been connected, Then make sure you select the 2.4G instead of 5G WIFI. Then connect it again.
Q: Why feed on the APP but no food dispensing from the feeder?
A: If the APP shows the feeding has been succeeded, but no food dispensing from the feeder. Firstly suggest checking if the food tank got enough food. Secondly, if the impellors have been rotated normally. (You can judge from the sound). Thirdly suggest feeding again for few more times to avoid the signal delay causing the troubles.(Internet delay).
Q: Why can not log in my Smart life account?
A. Firstly, please check if the feeder has been connected to the WiFi properly. Secondly, please check if the account has been occupied by others. Suggest unloading and Reinstall the APP.
Q: Is it possible to set up a feeder schedule when the feeder is on battery power?
Under the condition that the feeder is connected to the network properly, the feeding schedule can be set on battery power, but the battery power consumes a lot of working time and only lasts 20-24 hours, so it is more energy-saving under
100% After Sales Service
We provide a I-year warranty for this appliance. Please email our support team at [[email protected]] if you have any questions, attach your order number and describe your problem in your email. We will get back to you within 24 hours.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>