boAt Stone Cuboid User Manual
- June 5, 2024
- Boat
Table of Contents
Stone Cuboid
User Manual
Immerse yourself in the crystal-clear clarity and rich bass of boAt Stone Cuboid Bluetooth speaker that’s designed by acoustic experts to deliver a never-heard-before listening experience. Its IPX5 Splash & Water Shield protection and lightweight build ensure that you
can carry your vibe anywhere without a worry. Never let your party run out of your mix with its powerful 5.5HRS playback. You can also choose from multiple connectivity modes, including Bluetooth v5.0, TF Card, AUX, and FM.
Specifications
Buttons and Indicators
Specifications
Troubleshooting FAQs
Charging
What to do if the speaker is not charging / battery life is low?
- Check if restarting the device resolves the issue.
- Check if the charging cable connected to the speaker is not broken, use other charging cables to charge the speaker and also ensure that the charger being used is not of 9V or 12V as that will damage the speaker. The Red LED light located on the speaker would indicate if the charging is happening or not.
- Check if the Type-C port on the case is damaged or not
- Check if the charger being used is functional.
- Check if there is any dust or obstruction clogging the charging port of the speaker. (If so, try cleaning it with a piece of cloth and try plugging it again).
- Try factory-resetting the device.
Poor Sound Quality
What to do if the sound is distorted/low volume/low bass/low quality?
- Check if connected device does not have any equalizer settings applied.
- Check if the problem still occurs if the device is moved closer and all obstacles in the middle are removed.
- Check if the distortion or quality lowers at all volumes or only at high volumes.
- Check the sound on different media players and different devices and if the distortion happens on all devices or only on specific ones.
- Check if the problem occurs at all levels of charging or only at low charging levels.
- Check if the speaker does not have water droplets, in case they do, use the blow dryer to dry out any water from a distance.
What to do if the speaker occasionally keeps disconnecting the Speaker?
- Check if restarting the speaker resolves the issue.
- Check if the same problem happens for different devices and media players.
- Check if there are any obstructions between the speaker and the device, move the device at a closer range to the speaker and see if it still affects it.
- Try factory-resetting the device.
What to do if there is no sound from the speaker?
- Check if restarting the device resolves the issue.
- Fully let the speaker discharge and then charge it fully again before use.
- Check to see if the device has been properly connected, i.e., the jack is properly inserted into the device for AUX, SD card is properly functioning for SD mode, properly paired for Bluetooth mode with light solid blue.
- Try connecting through a different connection mode or media device.
- Check if the device was not subject to any mishandling, or exposed to direct sunlight or hazards like fire.
Connectivity
How to pair the speaker via Bluetooth mode?
- Turn the speaker on and its LED indicator will blink white in color until the paring is done.
- Activate the phone’s Bluetooth function and search for “Stone Cuboid”. As soon as the speaker has been selected by you and paired, there will be a sound prompt indicating pairing.
Note: The speaker can automatically reconnect to the last paired device.
3. The speaker gets automatically turned off if there’s no paring for 10 minutes.
4. Disconnecting the Speaker – For disconnecting the Bluetooth connection, long press “Mode” button.
How to connect via Aux Mode?
- You can switch to AUX mode by using the AUX cable to connect the phone and the speaker, and then short pressing the Power button.
- In the AUX mode, you can control the audio playback via the media device/ phone.
What to do if device not connecting via Bluetooth?
- Check to see if the device is in pairing mode, after powering it on the LED indicator will blink white.
- Check if the speaker is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
- Check if the device being connected to supports Bluetooth connections or not
- Check if it is a passcode issue and if so enter 0000 / 1234
- Check if the speaker being connected to does have any software issues or not – Check to forget the device on Bluetooth, update the mobile software, if it still does not work try factory resetting the device.
What to do if the Aux mode is not working?
- Check if restarting the device resolves the issue and if the speaker is in Aux mode by short pressing the ‘Mode’ button.
- Check if you have connected the aux cable properly and in the correct orientation on both ends.
- Check if the problem persists even after using a different cable or different device to connect to the speaker.
How to connect via FM Radio?
- Insert the micro USB cable into the speaker to utilize it as an antenna.
- Short Press “MODE” button to switch to FM mode
- Under radio mode, Long press play/pause button to auto search the FM channel and it stores automatically
- Short Press “Play/Pause” button to mute the speaker.
What to do if the FM does not work?
- Ensure that you short press the “MFB” button
- If it doesn’t work then try to switch the device off and on and trying to switch to FM mode by short pressing the “MFB” button again.
Dysfunctional Voice Assistant
What to do if the voice assistant does not wake up?
Ensure that you short press the “ ” button to turn on voice assistant.
Microphone Functionality
What to do if microphone of the device is not working?
- Check to see the microphone is not being blocked by any dust or obstruction.
- Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.
- Check if the microphone was not exposed to any hazards like direct sunlight or fire.
- Check if the microphone was not exposed to water above the resistance or dipped in any other liquid or not.
- The microphone is not functional using the aux mode, check if the device is not in aux mode.
- Try factory-resetting the device.
Other Functional Issues
What to do if device does not turn ON / not working?
- Check to see if the device has been properly charged first or not. Red LED light on the speaker will indicate they are still being charged at different levels.
- Check if the voltage of the charger is correct for the speaker or not.
- Check by switching the speaker on manually, press and hold the power on button for at least 3 seconds.
- Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.
What to do if the in-built controls of the speaker is not working?
- Check if the controls do not work while connected to another device.
- Check if the device is in aux mode because the buttons will not work in aux mode.
- Check if the media player being used supports such controls and if the controls do not function on call or other media players.
- Check if the controls have been physically damaged or exposed to any hazards.
What to do if there are any other functional issues with Stone speaker?
- Check if restarting the device resolves the issue.
- Fully let the speaker discharge and then charge it fully again before use.
- Try connecting through a different connection mode or media device.
General FAQs
Technology
How to play songs in TF card Mode?
To play songs in the TF Card mode, you may insert the TF card into the TF card
slot on the speaker. It will automatically switch to TF Card mode.
Does this speaker support wireless playback?
Yes, the speakerphone will work and, in this case, the primary speaker will be
the speakerphone.
Does the speaker have Aux port/ USB port/ SD card slot?
The speaker has an AUX, USB port which supports 3.5mm. Other than that, it
supports Bluetooth connectivity.
Does the speaker support call feature/ speaker phone?
Yes, one can accept calls on the speakers.
Can the speaker be used for gaming?
Yes, it can be. However, it is advised to only do so using an aux connection
as Bluetooth mode might have latency issues.
Device Controls
How to Power ON/OFF?
Power ON: Long press the power button for 3 seconds and Blue LED
flashes.
Power OFF: Long press the power button for 3 seconds and Blue LED turns
off.
How to adjust Volume?
Volume Up: Short press the “volume up” button in steps for increasing the
volume.
Volume Down: Short press the “volume down” button in steps for decreasing
the volume
How to change music tracks?
Previous Track: Long press the “volume down” button for returning to the
previous track.
Next Track: Long press the “volume up” button for skipping to the next
track.
How to play and pause the music?
Short press the Play/Pause button.
How to answer/end calls?
Short press the play/pause button to answer/end calls.
How to reject calls?
Long press the play/pause button for rejecting incoming calls.
How to activate voice assistant?
Short press the “Voice Assistant” button to activate the voice assistant.
How to switch calls between speaker and the phone?
Long press the play/pause button for 2 seconds.
What to do if the voice assistant doesn’t get activated even though my
phone supports it?
To activate voice assistant, ensure that you have it enabled on your media
device (Google on android & Siri on apple devices).
Can I activate assistance by voice?
Ensure that you short press the “ ” button to turn on voice assistant.
Does it have an in-built mic for hands-free calling?
Yes, Stone Cuboid comes with an in-built mic that allows hands-free calling.
Device Charging
How can I charge the speakers?
To charge the earphone, plug one end of the Type-C charging cable with the
speaker and connect the other end to a computer or wall adapter.
What are the Battery indications?
Charging: During charging, you could check charging status from the 4 LED
white colour charging indicators:
0%-25%: 1st LED keeps solid, second light flickers, and 3rd and 4th light
stay off.
26%-50%: 1st and the 2nd LED keep solid; 3rd LED flickers and 4th stays
off.
51%-75%: 1st, 2nd and 3rd LED keep solid, 4th light flickers
100%: At charging 100% all 4 LEDs stay solid
Fully Charged: Once the earphones are fully charged, it is indicated by
all the 4 LEDs stay solid.
What is the battery life of the device?
Stone Cuboid offers a battery back up of 5.5 hours on a single charge.
How can I prolong my speaker’s battery life and usage?
To ensure maximum efficiency and battery life ensure that the speaker is not
used at 100% volume at all times and that the battery is charged when it falls
to 20% and below.
Does the speaker need to be charged and turned ON manually after connecting
it with an AUX cable?
Yes, the speaker is not powered through the aux cable so please make sure that
it is charged and powered on before using it through aux connection.
Can the speaker be charged with Micro-USB cable?
No, you cannot charge it with Micro-USB cable. It can only be charged using
the Type-C cable.
Water/Dust Protection
Is the speaker waterproof?
Not completely, it has IPX5 certification Which can only protect under
accidental exposure to water and is not meant to be used inside water.
Can the speaker be submerged in water or used under water?
The speaker does have IPX5 water protection but it only protects under
accidental exposure to water and is not meant to be used inside water