Power Dynamics BF80T Speaker 8 Inch 180W 100V Instruction Manual

: June 5, 2024
: Power Dynamics

Table of Contents

Power Dynamics BF80T Speaker 8 Inch 180W 100V
introduction
INSTALLATION
ROTARY SWITCH
CONNECTION DIAGRAM
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power Dynamics BF80T Speaker 8 Inch 180W 100V

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

introduction

The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
If the lead is damaged, it must be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do.
All repairs should be carried out by a qualified technician only.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

INSTALLATION

Cabling of a 70/100 Volt system belongs to an electrical installation which may only be carried out by a qualified electrician!
The total load must not exceed the rated power of the amplifier. Before starting the installation, make clear how many speakers , you want to install in the room, and with what wattage(s), as overload will damage the amplifier and speaker.

Procedure

Step: If the 70/100Volt system is turned on, turn it off before connecting.
Step: Connect the speaker(s) to the 70/100V amplifier output, using a two-core 100Volt suitable cable. For the wiring diagram, see later in this manual.
Always insulate the unused connection cables.
Step: If you are connecting multiple speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded.

CAUTION: Never set the switch to “—“ position for 100V line operation, as doing so may result in unrepairable damage.
CONSULT THE TAPPING OVERVIEW ON THE LAST PAGE BEFORE CONNECTING!

ROTARY SWITCH

Before connecting, always make sure to set the rotary switch to the correct position!
Never set the switch to “—“ position for 100V line operation, as doing so may result in unrepairable damage.

CONNECTION DIAGRAM

TECHNICAL SPECIFICATION

Output power: RMS
: 50W
Diameter tweeter
: 1”
Diameter woofer
: 8”
Tweeter type
: Dome
Magnet type
: 12.5W, 25W, 50W
Power tappings
100V, 70V, 8Ohm
Impedance
60Hz – 20kHz
Frequency response
: 60Hz – 20kHz
SPL @1W/1m
: 93dB
IP rating
: IPX5
Dimensions (L x W x H)
: 250 x 280 x 415mm
Weight (kg)
: 6,60 kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject: