JBC 0021102 NASE Updating Kit C115 Instruction Manual
- June 5, 2024
- JBC
Table of Contents
JBC 0021102 NASE Updating Kit C115
This manual corresponds to the following references: 0021102 NASE Updating Kit
Packing List
The following items are included:
Connections
Is necessary to update the software to use C115 Cartridges in NT115-A and AN115-A with NAE-A and NAE-B. Software version number should be higher than 8886229. See the software updater. Available at www.jbctools.com/software.html
Changing the Splashguard
Changing Cartridges for NT115-A
Save time and change Cartridges safely without having to switch the station off.
*Important
It is essential to insert the Cartridges as far as the ring for a proper
connection.
Changing Grips
Save time and change Cartridges safely without switching the station off.
Aligning Cartridges
Compatible Cartridges
The AN115-A and NT115-A w ith C115 Cartridges. Find the model that suits your needs in orks wwww.jbctools.com
Maintenance
- Before carrying out maintenance or storage, always unplug the tool.
- Check periodically that the metal parts are clean to ensure it is detected when on the stand. Always use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to protect health and prevent electric shock, injury, fire or explosions.
-
Do not use the tool for any purpose other than soldering or rework. Incorrect use may cause fire.
-
The mains cable must be plugged into approved bases. Make sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
-
The temperature of accessible surfaces may remain high after the unit is turned off.
Handle with care. -
Do not leave the appliance unattended when it is on.
-
It is necessary to turn the station off before changing tips.
-
Heat can cause inflamable products to ignite even when out of sight.
-
Be careful with the remains of liquid tin. In contact with skin, it can cause burns.
-
Avoid flux coming into contact with skin or eyes to prevent irritation.
-
Be careful with the fumes produced when soldering.
-
Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
-
This appliance can be used by children over the age of eight as well as persons with reduced physical, sensory or mental capabilities or lacking of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
-
Maintenance must not be carried out by children unless supervised.
Specifications
Warranty
-
JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse. -
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
-
Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility. www.jbctools.com