Hangzhou Sky Lighting DS8SCWT20BK LED Bulb Installation Guide
- June 5, 2024
- Hangzhou Sky Lighting
Table of Contents
Hangzhou Sky Lighting DS8SCWT20BK LED Bulb
Installation Guide
DOWNLOAD AND INSTALL THE FEIT ELECTRIC APP
- Search for the Feit Electric App in the App Store or Google Play Store.
- Download and install the Feit Electric App on your smart device.
- Setup an account or log in to your existing account.
INSTALL YOUR LIGHT BULB
Install your light bulb(s) into a socket
NOTE: Constant power to the bulb(s) is required at all times.
ADDING YOUR SMART WI-FI BULB USING THE FEIT ELECTRIC APP
- Tap+in the upper right corner. Note: if this is the first device you are setting up you can also select Add Device (A).
- Tap Lighting and select Lighting device (B).
- Power On the bulbís) and confirm the bulb{s) is blinking. Then tap Confirm (C).
- You will be prompted to confirm your WiFi network and enter your password. Then tap Confirm (D).
Be sure to connect to a 2.4 GHz WiFi network that covers your installation location.
NOTE: If the bulb/s) is not blinking, turn the bulb(s) ON-OFF-ON-OFF-ON.
STATUS MENU
- The status menu will appear. Wait until it’s completed.
NOTE: If unsuccessful, the “Failed to Add” screen will appear, Close the app and repeat the previous steps. If Successtul, continue to step 5.
NAMING DEVICES
- To name the bulb/s) tap the Pen icon, enter the new name and tap Done.
- The bulbs are now ready to be controlled with the Feit Electric App.
- For full user guide and setup instructions, please visit www.feit.com
Environmental Specification
- Only install in operating environments between -20°C and + 40°C (-4F and +104°F).
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocates the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISEDC RSS Warning
This device complies with Innovation, Science, and Economic Development Canada Compliancelicense-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCCI ISEDC Radiation Exposure Statement
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>