Hangzhou Sky Lighting DSB114CWT20 Smart LED Bulb Installation Guide
- June 6, 2024
- Hangzhou Sky Lighting
Table of Contents
Hangzhou Sky Lighting DSB114CWT20 Smart LED Bulb
Installation
-
DOWNLOAD AND INSTALL THE FEIT ELECTRIC APP Search for the Feit Electric App in the App Store or Google Play Store. Feit Electric app Download and install the Feit Electric App on your smart device. Setup an account or login to your existing account
-
INSTALL YOUR LIGHT BULB Install your light bulbjs) into a socket
NOTE: Constant power to the bulb(s) is required at all times -
ADDING YOUR SMART WI-FI BULB USING THE FEIT ELECTRIC APP
- Tap +in the upper right corner. Note: if this is the first device you are setting up you can also select Add Device (A).
- Tap Lighting and select Lighting device (B). Power On the bulb/s) and confirm the bulb/s) is blinking. Then tap Confirm (C).
- You will be prompted to confirm your WiFi network and enter your password. Then tap Confirm (D).
- Be sure to connect to a 2.4 GHz WiFi network that covers your installation location.
-
STATUS MENU The status menu will appear. Wait until it’s completed.
NOTE: If unsuccessful, the “Failed to Add” screen will appear. CIose the apPP and repeat the previous steps. If successful, continue to step 5. -
NAMING DEVICES To name the bulb/s) tap the Pen icon, enter the new name and tap Done. The bulbs) is now ready to be controlled with the Feit Electric App.
Environmental Specification
Only install in operating environments between -20°C and + 40°C (4°F and +104F).
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
diferent from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help.
FCC Caution: Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
FCCI ISEDC Radiation Exposure Statement This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.