Hangzhou Sky Lighting DSST218SCWT20 LED Lamp User Manual
- June 5, 2024
- Hangzhou Sky Lighting
Table of Contents
LED LAMP
Installation Guide
DOWNLOAD AND INSTALL THE FEIT ELECTRIC APP
- Search for the Feit Electric App in the App Store or Google Play Store.
- Download and install the Feit Electric App on your smart device.
- Setup an account or login to your existing account
INSTALL YOUR LIGHT BULB
- Install your light bulb(s) into a socket
NOTE: Constant power to the bulb(s) is required at all times
ADDING YOUR SMART WI-FI BULB USING THE FEIT ELECTRIC APP
- Tap + in the upper right corner. Note: if this is the first device you are setting up you can also select Add Device (A).
- Tap Lighting and select Lighting device (B). |
- Power On the bulb(s) and confirm the bulb(s) is blinking. Then tap Confirm (C). |
- You will be prompted to confirm your WiFi network and enter password. Then tap Confirm (D).
Be sure to connect to a 2.4 GHz WiFi network that covers your installation location.
NOTE: If the bulb(s} is not blinking, turn the bulb(s) ON-OFF-ON-OFF-ON.
STATUS MENU
- The status menu will appear. Wait until it’s completed.
NOTE: If unsuccessful, the “Failed to Add” screen will appear. Close the app and repeat the previous steps. If successful, continue to step 5.
NAMING DEVICES
- To name the bulb(s} tap the Pen icon, enter the new name and tap Done. The bulb(s) is now ready to be controlled with the Feit Electric App.
For full user guide and setup instructions,
Please visit www.feit.com
SMART LED BULB
Environmental Specification:
- Only install in operating environments between -20°C and + 40°C (-4°F and +104°F).
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISEDC RSS Warning
This device complies with Innovation, Science and Economic Development
Canada Compliance license-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may
cause undesired operation of the device.
FCC/ ISEDC Radiation Exposure Statement
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>