ALTO MK2 Bluetooth Total Battery Powered Bluetooth Receiver User Guide

ALTO MK2 Bluetooth Total Battery Powered Bluetooth Receiver

Box Contents

Bluetooth® Total, Micro-USB Charging Cable, User Guide.
Charging Bluetooth Total: Use the included micro-USB cable to connect Bluetooth Total to a USB power adapter (sold separately) connected to a power outlet or your computer (powered on).
Note: Bluetooth Total may not be fully charged upon purchase. While it is safe to use it right away, charging for 3-4 hours before initial use will ensure a full charge and the best performance.

Controls

1.  XLR Output
2.  Stereo-Link
3.  Stereo-Link LED
4.  Pair
5.  Pair LED
6.  Power On/Off
7.  Power and Battery Status LEDs
8.  Micro-USB Charging Port

LED Activity

• When ON and battery is not charging:

  • 20–100% = Green LED lit solid.
  • 10–20% = Green and Amber LEDs are lit solid.
  • 0–10% = Green and Red LEDs are lit solid.
    Power Standby Mode = Green LED off. Red LED flashes once every 10 seconds.

• When ON and battery is charging:

  • Power Standby Mode = Green LED off. Red LED flashes once every 10 seconds.
  • 5–80% Charged = Green LED is off. Amber LED flashes slowly.
  • 80–99% Charged = Green LED flashes slowly. Amber LED is off.
  • 100% Charged = Green LED is lit solid. Amber LED is off.

• When OFF and charging:

  • 5%–80% Charged = Green LED is off. Amber LED flashes slowly.
  • 80%–99% Charged = Green LED flashes slowly. Amber LED is off.
  • 100% Charged = Green LED lit solid. Amber LED is off.

Bluetooth Pairing a Single Bluetooth Total

1.  Power on your Bluetooth device.

2.  Power on Bluetooth Total.

3.  Press and hold the Pair button for 3 seconds on Bluetooth Total. A pairing tone will sound when Bluetooth Total is in pairing mode. Note: Press Pair again before your device is paired, to cancel the pairing process. Note: Before pairing, turn off Wi-Fi on your device and stop any audio playback.

4.  Navigate to your Bluetooth device’s setup screen, find “ALTO BT2” and connect.

5.  When paired successfully, a confirmation tone will sound and the blue Pair LED will illuminate solid.
   Note: If your Bluetooth device prompts for a pairing code, enter “0000”.

6.  Adjust the volume on your Bluetooth device. To erase previous pairing settings, press and hold the Pair button for 10 seconds. A confirmation tone will sound, indicating that pairing settings have been erased. You can now pair to a new device. Note: When wirelessly connected to a single loudspeaker, the Left/Right audio signal will be summed to mono.

Stereo-Linking 2 Bluetooth Total Units

1.  Follow steps 1-6 in the Bluetooth Pairing a Single Bluetooth Total section.
2.  Press and hold the Stereo-Link button for 3 seconds on the primary (left) Bluetooth Total. Press and hold the Stereo-Link button for 3 seconds on the secondary (right) Bluetooth Total.
3.  Both Stereo-Link LEDs will blink and a linking tone will sound while each Bluetooth Total “searches” for the other.
4.  When they are successfully linked, each Bluetooth Total will produce a confirmation tone and the Stereo-Link LEDs on both units will be lit solid. To erase linking settings on the linked unit, press and hold the Stereo-Link button for 10 seconds. A confirmation tone will sound, indicating that linking settings have been erased. To erase linking settings on both units, press and hold the Stereo-Link button on the master unit for 10 seconds. A confirmation tone will sound, indicating that linking settings have been erased.

References

• Alto Professional
• Support : Alto Professional
• altoprofessional.com/warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>