isonteck PB-D100W2 Wireless Charging PowerBank User Guide

isonteck
Wireless Charging
PowerBank PB-D100W2
User Guide

Thanks for purchasing the Vojtech product, please read this user guide carefully before operating and keep it for future reference.

Box Contents:

1 Powerbank
1 USB to Micro USB Cable
1 User Guide

Technical Specifications:

Type C 5V/3A, 9V/2A, 12V/1.5A 5W
Input:| Type C 5V/3A, 9V/2A Micro USB 5V/2A, 9V/2A

About the Powerbank:

1. USB Output (QC 18W+Huawei 22.5W)
2. Type Input&Output (PD 18W)
3. Micro USB Input (QC 18W)
4. Wireless Charging LED
5. Power On/Off
6. Wireless Charging 5W
7. Lighting Logo
8. Capacity LEDs
9. Quick Charging LED

Check Your Powerbank Battery Status from the LED:

Press the Power On/Off Button to check the remaining capacity.

| The battery is low, with less than 25% remaining.
PLEASE recharge.
---|---
| The battery is healthy, appx 75%remaining.
You can take it when you are on the go!
| The battery is medium, appx 50% remaining.
Please recharge after several uses.
| The battery is sufficient, with more than 75% remaining.
You can take it when you are on the go!

Charge Your Devices:

5-1. Charge with a USB Cable.
The powerbank is compatible with all smartphones, tablets, and all USB-Powered devices with 5V, 9V, and 12V input.
To charge your device with a powerbank, plug the USB charging cable into the USB output or Type C output, and connect the other end to the device.

• The supplied charging cable supports all smart devices that have a Type C input. For the smart devices that have different inputs, please use the cable supplied by its manufacturer.
• The Capacity LED on display will light up and one of the LEDs will be blinking during charging.
• The Powerbank would automatically shut off in a few seconds after finishing charging.

5-2. Charge Qi-Enabled Smartphone wirelessly.
Step 1. Press the power button on the left side until you see the wireless charging LED light up in RED.
Step 2. Place down your Qi-enabled smartphone on the powerbank surface where you can see a wireless charging icon.

• The LED light will be blue during charging.
• The LED Light will be red after charging.

5-3. Charge Qi-Enabled Gadgets(TWS, Mouse, etc) with Small Wireless Power
Step 1. Press the power button once, and then press it and hold it for 3 seconds again to activate the small power charging mode.
Step 2. Place down your Qi-Enabled gadgets on the powerbank surface where you can see a wireless charging icon.

• The LED light will be blue during charging.
• The LED Light will be red after charging.

Charge the Powerbank:

We suggest that you fully charge the powerbank before each use. To Charge your powerbank, use one of the following 2 charging options:

6-1. Charge with a Power Adapter with a USB port.
Connect the powerbank to the power adapter USB port with the supplied USB to Type C Cable directly. or with your own USB to Micro USB cable.

6-2. Charge with a free USB port on your PC.
Connect the powerbank to a freeUSB port on your PC with the supplied USB to Type C Cable directly. or with your own USB to Micro USB cable.

IMPORTANT DISPOSAL:
This electrical appliance does not belong in the household waste.
For proper disposal, please contact the public collection in your community.

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>