iSonteck WL031 3 In 1 MagSafe Charger User Guide
- June 15, 2024
- isonteck
Table of Contents
3in-1 MagSafe Charger
for Phone, AitPods and Apple Watch Setup Guide
Thanks for purchasing our product, please read this user guide carefully before operation and keep it for future reference.
Box Contents
1x 3-in-1 Travel Charger
1x USB Type C Cable
1x Setup Guide
About the Device
- Wireless Charger for Phone;
- Charger for Apple Charger
- Wireless Charger for AirPods
- Working LED
- Type C PD Input
Charging Your Devices
3-1. Setup Your Travel Charger
- Unfold the travel charger from the middle area of travel charger;
- Turn up the phone charger to the most perfect angle you want;
- Release the Apple Watch charger.
3-2, Connect Your Travel Charer to a USB C Charger with the included USB C cable.
3-3. Place down the iPhone, AirPods and Apple Watch at the corresponding place, they will be charged automatically.
Technical Specifications
Input: | Type C 5V/3A, 9V/3 A |
---|---|
Phone Chargng: | Max. 1SW (9V/1 67A) |
AirPods Charging: | Max. 3W |
Watch Charging: | Max. 2.5W |
Folding Size: | 63x618mm |
Unfolding Size: | 73.5x63x110.8mm |
Weight: | appx 1459 |
LED Indication
State | LED Indication | wiiticits |
---|---|---|
Plug into Power Source | 4x Blinking White and Off | |
Stand By | Off | |
Phone Charging | Pulsing White | |
Phone Fully Charged | Off | |
AirPods Charging | Off | |
Apple Watch Chargin g | Off | |
FOD Protec.tiun | Blinking White |
FOD (Figre object dktaxtko) is a security guarantee for a charger, the
wireless charging system can detect if a foreign object, such as metal, is on
its surfac In this event, the v.irele)s charger either stops charging or does
not start charging at all Check and release the foreign object if you see the
LED is blinking
This product complies with the radio interference requirements of the European
Community.
**** This symbol indicates that thisprodu ct shall not be treatedas household
waste. For proper disposal, please contact the public collection in your
community.
FCC STATEMENT
Thisdevice complies with Part 15 ofthe FCC Rules, Operation is su bject tothe following two conditions:
- Thisdevice may notcause harmful interference, and
- Thisdevicemustaccept any interference received, including interferencethat may cause undesiredoperation.
Warning: Changes or modifications not expressly approved by the party responsi
ble for compliance could void theuser’s authority to operatethe equipment.
NOTE This equipmenthas beentested and foundtocomply withthe limits for a
Class B digitaldevice, pursuant to Part 15 ofthe FCC Rules.
Theselimitsaredesignedto provide reasona ble protection against harmful
interference in a residential installation. Thisequipment generates usesand
can radiate radiofrequency energy and, ifnot installedandusedin accordance
withthe instructions, may causeharmful interference to radio communications.
However, there is no guarantee that interfer ence willnot occur ina par
ticularinstallation. Ifthisequipment doescause harmful interferenceto radioor
television reception, which can bedetermined by tur ning theequipment off
andon, the useris encouraged totry tocorrectthe interference by one or moreo
fthe followingmeasures:
Reorient or relocate thereceivingantenna.
Increase theseparation betweenthe equipmentand receiver.
Connectthe equipment intoanoutlet onacircuitdifferentfromthatto whichthe
receiver is connected.
Consultthe dealer or an experienced radio/TV technicianfor help.
RF warning statement:
Thedevice has been evaluated tomeet general RF exposure requirement. The
device shourd be instased and oper ated with minimum distance 2ocm between the
radiator & your body”.
Thisdevicecomplieswith Industry Canadalicence-exempt RSS standard( s).
Operation is su bjectto the followingtwo conditions:
- thisdevice may not cause interference, and
- thisdevice mustaccept any interference, including interference thatmay cause undesired operation ofthe device”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>