HP Bluetooth Speaker 350 User Manual
- June 5, 2024
- HP
Table of Contents
HP Bluetooth Speaker 350
Power button
Turns the speaker on or off. The first time you turn on the speaker, it automatically enters Bluetooth pairing mode. To connect to a device through Bluetooth, see the device documentation. The speaker turns off after 5 min if you do not pair it to a device or connect it to a device through an auxiliary cable (not included). Press and hold the button for 3 s to enter pairing mode and either pair to a new device or connect to the last paired device. The speaker remembers up to 8 connected devices.
Volume down button
Decreases the volume. Press and hold to play the previous track. During a phone cll, press and hold to mute your microphone.
Volume up button
Increases the volume. Press and hold to play the next track. During a phone call, press and hold to switch between two calls.
Call button
Answers a call. If connected to a device through Bluetooth, pauses your audio when pressed. Press again to answer a second cll. Press and hold to end or decline a call and return to your previous call or audio.
Power light
white : The speaker is on and connected to a device. Blinking white: The speaker is in pairing modeAmber: The speaker Is Charging Blinking amber: The battery charge level is less than 20%. A low battery tone plays with increasing frequency.
Audio-in jack
Connects the speaker to a device.
USB Type-C°port
Connects the speaker to power EFully charge the speaker before first use.
Lanyard attachment point
Attach a lanyard (not included) to the speaker. The product passed IP54 testing for protection against dust ingress and water splashes. To maintain the lP54 rating. close the l/0 door. IP ratings are not a guarantee of future performance. Cable not included.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>