SINOSECU KR530 Passport Reader Scanner User Manual
- June 5, 2024
- SINOSECU
Table of Contents
SINOSECU KR530 Passport Reader Scanner
Thank you for purchasing Sinosecu passport reader. It is specially designed for both desktop and kiosk ID reading and verification solutions,it can read multiple document types: passports, e-passports, ID cards, visas, driver’s licenses. And it can be widely used in any application, such as Airport, Hotel, Bank, Travel Agency, Immigration, Border Control.
Introduction
- Sinosecu Passport Reader, It is specially designed for both desktop and kiosk ID reading and verification solutions,it can read multiple document types: passports, e-passports, ID cards, visas, driver’s licenses.
- It supports !CAO-compliant and non-compliant travel documents. High-resolution images are captured by 5.0 Megapixel camera, and multiple illuminations (Visible, IR and UV) are also available.
- The Passport Reader series are widely used in any application, such as hotels, airports, travel agencies, banks, immigration offices, border control.
Application
Feature
System Requirements
Getting started
Software
Please find the CD and COPY all files into your computer, which are Passport
reader’s SOK.
Driver
In the folder of “Passport Reader Driver”, please install “32 bit” or “64 bit”
driver according to your computer operating system.
Do not plug the reader in before installing the Passport Reader driver. You
must install the driver first.
Demo
In the folder of “SOK”, please install “setup.exe”. Once the software is
installed, there will be a desktop shortcut named “Sinosecu passport reader”.
Connect to computer
Place the Reader on a flat, firm, solid surface within easy access.
-
Connect the power line
-
Connect the USB line
Please connect the reader and your conputer with the USB line into your computer.
- Start the reader
Please turn on the power, the BLUE light means power is connnected; then please click “Sinosecu Passport Reader” to test.
Make sure the reader is plugged in and working
- Go to the “Control Panel”, and find the Device Manager: select “System” > “Hardware” > “Device Manager”.
- Make sure you see “Wintone Passport Reader” in the “Univessal Serial Bus controllers” section. If you cannot see this item, then reboot the reader and plug it in.
Document Test
Please start Sinosecu Passport Reader program with the desktop shortcut.Then test the demo program with passports.The following images show you the proper way to put documents in.
Trouble shooting
Image Calibration Tool
If the image you captured is overexposed or underexposed, please find the
folder of “Image Calibration Tool”, and run “Image Calibration Tool.exe” to
process the image.
Note: The Image Calibration Tool can be used for Visible, IR.
The Reader doesn’t work properly
- Connect the reader and make sure that the blue LED is on(leftside of the reader). If it is flashing or is not lit, there must be a power supply problem, maybe the USB cable is not connected, or the USB hub does not support USB2.0, or the Reader is defective.
- Make sure “Passport Reader” is in the “Universal Serial Bus controller” list. If it is not, please remove related entries in the device manager, then unplug the reader from PC, then reconnect. If this doesn’t work, please re-install the driver package.
Fail to initialize
When used Sinosecu Passport Reader software to test passport reader, it shows
message about initialize failed.
- Make sure the passport reader works.
- Update software. Check update if the version is V6.7.5.0 and later to install the updatest software, or contact to us.
Packing list
Passport Reader Pakage
Please carefully unpack the reader package. Any component missing or damaged,
please inform us as soon as possible. Each of the package contains the
follwing items:
Please read below information before use
- Please make sure the reader can be as efficient as possible by keeping it out of direct sunlight;
- Please do not expose the reader to damp or dusty environment;
- Please make sure about the AC power to be used;
- Please put the reader on a stable surface, unstable or tilted place may results in errors during the usage;
- Please keep the reader package in order to facilitate future transportation.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
Copyright© 2018 Sinosecu Technology Corporation. All rights reserved.
Sinosecu Technology Corporation
- info@sinosecu.com.cn
- www.sinosecu.com.cn
- 01087422498
Documents / Resources
|
SINOSECU KR530 Passport Reader
Scanner
[pdf] User Manual
KR4-KR5, KR4KR5, 2AXCC-KR4-KR5, 2AXCCKR4KR5, KR530, Passport Reader Scanner,
Reader Scanner, Passport Reader, KR530, Scanner
---|---