Supersonic IQ3266DJBT iq sound Portable speaker User Manual
- June 5, 2024
- Supersonic
Table of Contents
Supersonic IQ3266DJBT IQ sound Portable speaker
FUNCTION DESCRIPTION
POWER AND BATTERY
- Speaker output power 15W
- The rechargeable battery is integrated into the speaker
- Lithium battery 3. 7V/2400mAh
- Charging by adapter with output voltage DC 5V via USB cable.
- LED light is RED once connecting to power source.
- LED light is OFF once battery is full.
- Full charge take about 2-3 hours.
MODE CONTROL
- Switch power on, insert USB/SD Card, and Speaker play by USB/SD Card mode.
- Switch power on, press “MODE” to choose a function, and play songs.
- Press i.. or to select previous or next track, press 1 to play or pause.
- Switch power on , and press “MODE” to change to FM mode.
- Press 1 to automatically scan the FM channel.
- Press i.. or to select previous or next channel.
- USB version: 2.0, Format Version: FAT32, USB size: up to 32GB
BLUETOOTH CONNECTION
- Press the “MODE” button to display “blue” on the screen to start the Bluetooth connection
- The speaker is ready for pairing with a mobile device.
- Scan the Bluetooth name ” IQ-3266DJBT ” and pair via Bluetooth
- After paired, the volume and tracks could be controlled by both speaker”s control panel and the paired mobile device.
AUDIO INPUT & OUTPUT
- Disconnect USB and SD Card, Press the “MODE” button to show “LINE”.
- Insert the audio cable into the Aux input and connect external audio resources.
- Insert the Wired Microphone into Mic Input and connect external audio resources.
Important Notes:
CAUTION
- Do not use the machine while charging. This may cause battery damage.
- To save battery power, turn off speaker lights when not in use.
- Please keep the machine away from water and moisture.
- Do not open the machine or remove the back panel. This machine carries high voltage and could be very dangerous.
SPECIFICATIONS
- Speaker Unit: ————–6″x2
- Power: ——————–15W
- Frequency: ———-40Hz-20KHz
- S/N Ratio: — ——- – 78dB±3dB
- Voltage: ————— – DC 5V
- Battery:———- 3.7V/2400mAh
UNPACKING
- Speaker Unit — ———- —- x2
- remote control ————– x1
- USB Cable — —————- x1
- manual ——————– – x1
TROUBLESHOOTING
FCC
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>