Razer RZ010342 GAMING MOUSE User Manual
- June 5, 2024
- Razer
Table of Contents
DATE: 24 APRIL 2020
PRODUCT MANUAL FOR GAMING MOUSE
GAMING MOUSE MODEL: RZ01-0342
USB DONGLE MODEL: DGRFG7
User Manual
WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
- Gaming mouse (Gaming mouse model: RZ01-0342, USB Dongle: DGRFG7)
A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. Left tilt-click —repeat scroll down
E. Right tilt-click —repeat scroll up
F. DPI stage up
G. DPI stage down
H. Ultraslick mouse feet
I. Razer™ Focus+ 20K DPI Optical Sensor| J. Profile indicator
K. Profile button
L. Slider switch
• Razer™ HyperSpeed
Wireless (2.4 Ghz) mode
• Power off mode
• Bluetooth mode
M. 12-button side plate (recommended for MMOs)
N. 7-button side plate (recommended for MOBAs)
O. 2-button side plate (recommended for general use)
---|---
- Razer™ Speedflex charging cable
- Important Product Information Guide
- USB dongle adapter
The DPI stages are as follows: 400, 800, 1600 (default), 3200, and 6400. The DPI stages can be customized using Razer Synapse.
WHAT’S NEEDED
PRODUCT REQUIREMENTS
- PC with a free USB port or Bluetooth 5.0 connectivity
RAZER SYNAPSE REQUIREMENTS
- Windows® 7 64-bit (or higher)
- Internet connection for software installation
LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with 2-year limited warranty
coverage.
Now maximize its potential and score exclusive Razer benefits by registering
at razerid.razer.com
Got a question? Ask the Razer Support Team at support.razer.com
GETTING STARTED
CHANGING THE SIDE PLATE
Pull from the bottom of the side plate to remove and then replace it with the
preferred side plate. It’s recommended that you unplug the mouse first before
changing side plates.
To customize each side plate’s button assignments, please install Razer Synapse.
CHARGING YOUR MOUSE
Plug the charging cable from your computer’s USB port to your Razer Naga Pro.
For best results, please fully charge the mouse before using it for the first
time. A depleted battery will be fully charged in approximately 4 hours. This
connection also acts as the wired mode for your Razer device.
The Razer Naga Pro requires a USB connection that can supply sufficient power to charge the device. The charging process may be affected when connecting to a nonpowered USB hub or non-powered USB mostly found on keyboards and peripherals. It’s recommended to always connect the Razer Naga Pro directly to the USB port of your computer.
LOW POWER INDICATOR
The scroll wheel will blink red twice in repeated intervals to indicate that
its battery’s power is less than 5%. This lighting sequence will repeat until
the battery is drained or the mouse is connected to the PC via the charging
cable.
CONNECTING YOUR MOUSE
VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHZ) MODE
- Remove the attached side plate from the mouse to remove the wireless USB dongle.
- Reattach the side plate and insert the wireless USB dongle into the USB port of your PC.
- Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode.
Your Razer Naga Pro is now ready for use in wireless mode.
VIA BLUETOOTH MODE
- Push the slider switch to Bluetooth mode ( ).
- Press and hold the Profile button, and the DPI stage up and DPI stage down buttons simultaneously for three seconds to activate pairing mode. The Razer logo will blink twice in repeated intervals to show that the device is in pairing mode.
- Activate Bluetooth on your device, search for new Bluetooth devices, and select “Razer Naga Pro” from the list of devices found.
- Wait until the mouse pairs with your device. When paired, the Razer logo will briefly turn static blue before displaying its current lighting effect.
Once paired, your Razer Naga Pro will automatically reconnect to your device whenever in Bluetooth mode and within range. Keep the pairing devices within close proximity of each other for faster and more stable connections.
Congratulations, your Razer Naga Pro is now ready to use in Bluetooth mode.
USING THE WIRELESS USB DONGLE ADAPTER
Use the USB dongle adapter to easily access and extend the reach of your
wireless USB dongle.
PERSONALIZING YOUR MOUSE
Use the Razer Synapse app to customize your mouse’s lighting, configure its
buttons, and even create various profiles suited for different playstyles.
Your Razer Naga Pro can store up to 5 profiles from the Razer Synapse app,
allowing you to use these profiles even on systems without the app installed.
Pressing the profile button will cycle through the different profiles, with
the profile indicator’s color showing which profile is currently selected.
Profile | Designated color |
---|---|
Active Profile | White |
Profile 1 | Red |
Profile 2 | Green |
Profile 3 | Blue |
Profile 4 | Cyan |
Install Razer Synapse when prompted or download the installer from
razer.com/synapse
Find out more about your feature-packed wireless gaming mouse at
support.razer.com
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for support.
Do not take apart the device and do not attempt to operate it under abnormal
current loads.
Doing so will void your warranty.
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
in order to let the temperature stabilize to an optimal level.
COMFORT
Research has shown that long periods of repetitive motion, improper
positioning of your computer peripherals, incorrect body position, and poor
habits may be associated with
physical discomfort and injury to nerves, tendons, and muscles. Below are some
guidelines to avoid injury and ensure optimum comfort while using your Razer
Naga Pro.
-
Position your keyboard and monitor directly in front of you with your mouse next to it.
Place your elbows next to your side, not too far away and your keyboard within easy reach. -
Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height.
-
Keep your feet well supported, posture straight and your shoulders relaxed.
-
During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
-
Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
-
Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck, and legs.
If you should experience any physical discomfort while using your mice, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, please consult a qualified medical doctor immediately.
MAINTENANCE AND USE
The Razer Naga Pro requires minimum maintenance to keep it in optimum
condition. Once a month we recommend you unplug the device from the computer
and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not
use soap or harsh cleaning agents.
To get the ultimate experience in movement and control, we highly recommend a
premium mouse mat from Razer. Some surfaces will cause undue wear on the feet
requiring constant care and eventual replacement.
Do note that the sensor of the Razer Naga Pro is ‘tuned’ or optimized
especially for the Razer mouse mats. This means that the sensor has been
tested extensively to confirm that the Razer Naga Pro reads and tracks best on
Razer mouse mats.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, “For Gamers. By Gamers.”, and “Powered by Razer Chroma” logo are
trademarks or registered trademarks of Razer Inc. and/or affiliated companies
in the United States or other countries.
All other trademarks are the property of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing this guide
does not give you a license to any such copyright, trademark, patent, or
another intellectual property right. The Razer Naga Pro (the “Product”) may
differ from the pictures whether on the packaging or otherwise. Razer assumes
no responsibility for such differences or for any errors that may appear.
Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of the distribution of, sale of, resale of,
use of, or inability to use the Product. In no event shall Razer’s liability
exceeds the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Razer (Europe) GmbH, declares that this Razer Naga Pro Gaming Mouse
(contains Gaming Mouse Model: RZ01-0342, USB Dongle Model: DGRFG7) is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and 2015/863/EU.
[Gaming Mouse]
Radio Frequency: Bluetooth
Frequency Band: 2400MHz-2483.5MHz
RF Power: <10dbm
Radio Frequency: 2.4Ghz SRD
Frequency Band: 2400MHz-2483.5MHz
RF Power: <10dbm
Software/ Firmware: V1.0| [USB Dongle]
Radio Frequency: 2.4Ghz SRD
Frequency Band: 2400MHz-2483.5MHz
RF Power: <10dbm
Software/ Firmware: V1.0
---|---
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided
with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
References
- Razer Synapse 3 - Cloud-Based Hardware Configuration Tool | Razer United States | Razer United States
- Razer Warranty Policy | Razer United States
- Razer ID
- support.razer.com