SURGLASSES 43LT Asclepius Digital Anatomy Table Taiwan Bone King User Guide

SURGLASSES 43LT Asclepius Digital Anatomy Table Taiwan Bone King

Product Information

Specifications:

• Manufacturer: Taiwan Main Orthopaedic Biotechnology Co.,Ltd.
• Features: Dissection table with screen display
• Ports: USB, HDMI, Ethernet

Product Usage Instructions

Quick Setup Guide:

1. Insert the power cord plug into the socket.
2. Connect the other end of the power cord to the power socket on the side of the dissection table.
3. Turn on the power switch of the dissection table to 1.
4. Switch the host power switch to start the dissection table.
5. The screen will light up after turning on, wait for it to display the boot screen to complete setup.

Shutdown Process Teaching:

1. If different from the specified screen, close any open software and click the shutdown button on the main menu screen.
2. Click YES to confirm shutdown when prompted.
3. Wait for the blue screen with “No signal” before proceeding further. Do not unplug or turn off power prematurely.
4. After “No Signal” appears, switch the power switch to 0 and consider unplugging the power cord as per user preference.
5. Cover the screen surface with a dust cover after shutdown.

Connect Screen Synchronization Process Teaching:

1. Complete the boot process and connect the HDMI cable from the dissection table to the desired screen signal hole.
2. (Optional for non-touch screens) Connect a USB cable from the dissection table to the screen for additional functionality.
3. Ensure proper synchronization between the dissection table and the connected screen for seamless operation.

FAQ

Q: What should I do if the screen does not display any signal during setup?
A: If there is no signal on the screen, please wait patiently for a few seconds after turning on the dissection table. Ensure all connections are secure and try restarting the setup process.

Boot and process teaching

• The first step
  Insert the power cord plug into the socket.

• The second step
  Insert the other end of the power cord into the power socket on the side of the dissection table.

• The third step
  Turn on the power switch of the dissection table to 1.

• The fourth step
  Switch the power switch of the dissection table to start the dissection table. At this time, the dissec-tion table will have a turning on sound, which represents the dissection table is starting the operation.

• The fifth step
  The screen will light up after the dissection table is turned on. If there is no signal on the screen, please be patient and wait a few seconds. The following screen (As shown in figure) will be displayed.

• The sixth step
  When this screen appears (As shown in figure), it means that the boot is complete.

Shutdown process teaching

• The first step
  If it is different from the picture below, please close the currently used software first, and click the shutdown button at the bottom right corner of the main menu screen.

• The second step
  A prompt message asks if you want to shut down, click YES to start the shutdown operation.

• The third step
  After clicking YES, please wait patiently for a blue screen and the words “No signal” appear. Please do not unplug the power cord or turn off the power before the word “No signal” appears. Forced shutdown may cause damage to the dissecting tasble

• The fourth step
  After the word No Signal appears, you can go to the power switch on the side of the dissection table and switch the power switch to 0, and decide whether to unplug the power cord accord-ing to user habits. The removal of the power cord is not mandatory.

• The fifth step
  After the power is turned off, the screen surface can be covered with a dust cover to protect it from being dirty.

Connect screen synchronization process teaching

• The first step
  First complete the boot process and wait for the dissection table screen to appear before proceed-ing to the first step (Figure 1). After completing the above steps, there is an HDMI jack on the side of the dissection table(Figure 2), and then the HDMI cable Plug one end into the HDMI jack of the dissection table, and finally plug the other end of the HDMI cable into the screen signal hole you want to share.

• The second step (If the sharing screen is not a touch screen, you can skip this step):
  There is a USB input on the side of the dissection table. First plug one end of the USB cable into the USB socket of the dissection table, and then plug the other end of the USB cable into the USB socket of the sharing screen .

• The third step
  Click the SCREEN SYNCHRONIZATION screen synchronization button on the dissection table screen, wait a few seconds to share the screen to the big screen, and complete the synchronization screen.

Connect WI-FI process teaching

• The first step
  Click the WI-FI icon on the main menu screen.

• The second step
  Select a WI-FI name you want to connect.
  If the name of the WI-FI you want to connect, does not appear automatically, click the refresh button until it appears.
  WI-FI name must be composed of English letters, Chinese name will not be displayed.

• The third step
  After clicking the keyboard icon, touch the pass-word input field to enter the WI-FI password.

• The fourth step
  After entering the password, click the Connect icon.

• The fifth step
  After the connection is completed, click refresh again until the WI-FI name selected by the user appears in the current network field.

Safety Precautions

Tilting Control

Horizontal to Tilted.

1. Press the pedal at the bottom of the table slightly to lift the screen from the horizontal to tilted position. During this process, please hold the handle lightly until the screen is tilted and positioned.

Tilted to Horizontal.

1. Press the pedal at the bottom of the table.
2. Hold the handle at the top of the screen and push it gently down.
3. Release the pedal.

Copyright © 2018, Taiwan Main Orthopaedic Biotechnology, Co,. Ltd. All Rights Reserved.

Taiwan Main Orthopaedic Biotechnology Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>