UNIVET PZ0001 VisionAR Personal Protective Equipment Instructions

UNIVET PZ0001 VisionAR Personal Protective Equipment

WARRANTY

This product is guaranteed to be free from defects in materials and workmanship according to European standards.
This product does not contain user-serviceable parts. Repairs must be carried out exclusively by an authorized Univet s.r.l Service Center. Unauthorized repairs or modifications could cause permanent damage and invalidate the warranty; furthermore, modifications to the PPE by anyone other than the manufacturer and/or replacement of parts that do not conform to the required standards, may reduce performance and invalidate its certification.
Spare parts, if required, can be requested from Univet S.r.l. The replacement of structural components, if not specified in the packages or in a separate note, must be carried out only by Univet S.r.l.

This warranty does not cover damage caused by normal wear and tear or as a result of opening or repairing the Product by an unauthorized Service Center and does not cover damage caused by: improper use, moisture, liquids, proximity or exposure to heat and accidents, abuse, non-compliance with the instructions supplied with the Product, negligence or incorrect application. This warranty does not cover physical damage to the PPE or to the device.
The limited warranty does not cover the installation, removal or maintenance of the device or any related costs.
In addition, this warranty does not cover any issues related to the use of our drivers, software or this device with systems, including Operating Systems and hardware, that do not meet the requirements indicated in the related documentation.

We do not provide commercial or other warranties for our devices and accessories other than the warranty set out in these Terms and Conditions. This limited warranty is provided in place of any other warranties or similar obligations (if any) created by advertising, documentation, packaging, or similar.
The provisions of this clause do not affect any of your legal rights under applicable mandatory national law, including but not limited to your legal guarantee of conformity for goods.

Univet S.r.l. reserves the right to evaluate the complete replacement and/or restoration of the article. Items that have deteriorated due to wear, improper use or tampering with are excluded from maintenance and/or replacement operations.

GENERAL TERMS AND CONDITIONS

You acknowledge, using this device, that its software and services are not intended or suitable for environments where they could cause inaccuracies or delays in the information provided by the device, injury, death or damage to the environment.
Univet S.r.l, within the limits of the law, declines responsibility for damages that may occur if the device is used in unsuitable conditions.
Before using the PPE (Personal Protective Equipment) it is necessary:

• Verify that the item meets your requirements (by reading this disclaimer)
• Verify that the frame, lenses and display are not damaged or defective in any way that could compromise visibility or their structural impact resistance. If they are damaged or defective, the glasses must not be used and must be replaced
• If the PPE is not completely assembled or if it is necessary to replace one or more of its components, for example, the visor and/or the nose pads, the components must be assembled following the instructions provided in the box or in separate dedicated documentation
• Verify that all components are assembled according to the instructions provided in the dedicated documentation or box, if any, and make sure they have the required safety marks
• Adjust the straps and fitting system so that the PPE cannot inadvertently move during use
• The PPE must be worn from the first instance of exposure to risk if it is required by the regulations in force for the relative PPE marking

PRECAUTIONS AND RECOMMENDATIONS

The following notes must be taken into account by all users, both for the user safety and for correct maintenance of the devices and all its components. These notes are divided into the following sections:

• General Usage Notes
• Third-Party Accessories
• Third-Party Control Units

GENERAL USAGE NOTES

• PPEs must not be exchanged between multiple users as they are intended for personal use only.

• If the PPE is damaged during use, for example: impact, heat and/or exposure to corrosives, it must be replaced.

• Do not use cleaning products on PPE which have not been approved by Univet S.r.l.
  Contact – Univet S.r.l, for information on the products that can be used to clean and disinfect PPE.

• PPEs must be kept in their original packaging, at a temperature between 5°C and 40°C, in a dry environment, free of organic vapors and abrasive powders.

• To maintain the overall efficiency of the PPE it must not be exposed to direct heat or UV rays.

• Keep these notes together with the PPE and the original packaging.

• This item meets the requirements of the EU regulation 2016/425 and has been verified according to:

  • EN166 for the European market
  • ANSI Z87.1+ for US market

• The PPE identification code is shown on the box. The performance of this PPE is specified by conformity marks on both the product and its packaging.

• Assemble the components and/or accessories following the user manuals supplied with each item.

THIRD-PARTY ACCESSORIES
Third-party accessories can be connected to the PPE to add additional functionalities, however the following must be taken into consideration:

• The accessory must be designed in such a way as not to affect the mechanical or electric components of the device.
• The accessory must not impact the function of the glasses or the face area protected by the glasses.
• Before attaching an accessory verify that, if it detaches from the unit during use, this presents no risk.

RISKS

Using augmented reality may distract you and cause dangerous situations (for example, this device must not be used while driving or riding a bicycle). By using this device you agree that you are responsible for observing the laws in place that prohibit or restrict the use of such devices.  In particular you should consider the following areas of risk:

PERSONAL SAFETY
For the safety of the user, carefully read the attached documents for information on the correct use of the product. After reading this document, keep them in a safe place for future reference.

• Pay attention to the surrounding environment while wearing the PPE device
• The maximum brightness level of the display is limited to ensure a comfortable user experience and avoid being temporarily blinded. In the event of a malfunction, a brighter image may be displayed, in which case remove the device and notify your supervisors. Do not use this device in conditions and environments where this malfunction may expose you or others to danger
• Do not leave this product in places subject to variations in temperature, pressure and humidity that go beyond the operating range specified by the manufacturer
• Do not use the PPE device:
  • when driving
  • operating hazardous machinery
  • in locations with poor lighting
  • while on unstable surfaces (such as stairs or at high altitudes)
  • while walking in dangerous places, such as near machinery or equipment where entanglement may occur: this could cause accidents or injuries
• When work activities involve moving while viewing images on the device display, pay attention to the surrounding environment. If you are too focused on the image, you may cause accidents, fall and /or walk into people
• In the event that any part of the PPE is damaged, smokes or gives off a burning smell, immediately stop using the device. It can be used again only after carrying out checks and/or repairs at the Univet S.r.l Service Center

HEALTH
Users with the following health problems must receive approval from a physician before using an augmented reality PPE:

• Passive and/or active medical devices
• Affected by diseases that can alter the excitability of the central nervous system
• Affected by heart disease
• In the presence of obvious physical side effects such as nausea, visual fatigue, loss of balance, headache, discontinue use of the PPE device and consult a doctor
• Discontinue use of this PPE if the skin that touches the device is irritated or a skin rash occurs, and consult your dermatologist. If you sweat while using PPE, clean the sweat from your face and the product to prevent itching or skin irritation
• Take periodic breaks from viewing images on the display of this device. Prolonged use of the device may cause eye strain. In the case of fatigue or discomfort which continues after taking a break, stop using the device immediately
• Stop using this device if the skin of your face becomes inflamed during use and consult a dermatologist or doctor. Allergies to the material of the product may occur
• Do not use this product if you are sensitive to light or suffer from motion sickness as this device could exacerbate these conditions
• Do not use this device if you have existing eye conditions. Ignoring such conditions could aggravate symptoms such as strabismus, amblyopia or anisometropia
• To avoid accidental ingestion of parts of the device, do not put them in your mouth
• Do not touch the glasses, cables and various components of the device with wet hands as doing so could result in electro-shock

References

• univet.it
• Homepage - Univet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>