Sonus faber 968OMNIAWL Omnia Powered Wireless Speaker User Guide

: June 4, 2024
: Sonus faber

Table of Contents

PACKAGING CONTENTS
CONTROLS
INPUTS
START
SET UP
PLAY MUSIC
TRADEMARK AND LICENCE
INTRODUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**ARTISAN OF SOUND
OMNIA
WIRELESS SPEAKER
QUICK START GUIDE

**

SAFETY INSTRUCTIONS

PACKAGING CONTENTS

1.1. Register Omnia on sonusfaber.com and get an additional 1 year’s warranty cover!

Sonus faber 968OMNIAWL Omnia Powered Wireless Speaker -
fig

CONTROLS

2.1 Speaker

Sonus faber 968OMNIAWL Omnia Powered Wireless Speaker -
fig1

2.2 Remote Control

INPUTS

START

4.1 Place the Omnia where you intend to use it and connect Power Cable.

4.2 Press the Control Line (On/Off).

SET UP

When the Control Line (Play/Pause) is white blinking, the speaker is ready to configure.
5.1 iOS devices
Using Wi-Fi Settings:

Open Settings then Wi-Fi settings
Touch Omnia-xxxxxx under Set up
to connect with
Touch Next and then Done

Using HOME App:

Install/Update Home App
Open Home App
Press Add Accessory
Follow the wizard to set Wi-Fi

5.2 Android™ devices

Install/Update Google Home App
Open Google Home App
Press speaker
Follow the wizard to set Wi-Fi

Please Note: Omnia and your device must be connected to the same Wi-Fi network. Omnia supports both 2.4Ghz and 5.2Ghz Wi-Fi Bands.
5.3 Bluetooth

Press the Inputs button on the remote control until the Control Line LED flashes with a blue light
Select Omnia-xxxxxx from the list of Bluetooth devices
When the blue LED of the Control Line has a fixed light, Omnia is ready to play your music

5.4 Ethernet

Connect your router to Omnia via Ethernet cable

PLAY MUSIC

Press the inputs button on the remote to change input. The Control Line will change color as feedback. See the online Owner’s Manual for further details. The selected input is indicated by the LED color of the Control Line.

Bluetooth (blue)
HDMI ARC (orange) IMPORTANT: ensure the TV output is set to PCM
Phono (pink) IMPORTANT: Ensure the phono cartridge is a magnet moving (MM) with 2.4mV to 5.0mV output
Streaming Apps (white):
– AirPlay (white)
– Chromecast built-in (yellow)
– Spotify (green)
– Roon (purple)
– Tidal (light blue/turquoise)*
Once the user connects the streaming App, the relative color will Appear on the Omnia Control Line.
NOTA BENE: Keep the original Omnia packaging for future transport. Clean Omnia after disconnection using a slightly damp soft cloth.

TRADEMARK AND LICENCE

The Sonus faber Omnia incorporates copyright-protected technology that is protected by Italian patents and other Intellectual property rights. The Sonus Faber Omnia uses the following Technologies:
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, iPad, iPad Air, iPad Pro, iPhone, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries. To control this AirPlay 2— enab speaker, iOS 11.4 or later is required.
Chromecast built-inTM
Google, Android, Google Home, and Chromecast built-in are trademarks of Google LLC.
Being Roon Ready means that Sonus Faber uses Roon streaming technology, for an incredible user interface, simple setup, rock-solid daily reliability, and the highest levels of audio performance, without compromise.
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third- party licenses found here: www.spotify.com/connect/third-party- licenses
High Fidelity Music Streaming
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sonus Faber is under license. Other trademarks and trade names are those of their respective owners.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance. Wi-Fi CERTIFIED Logo indicates the product has undergone rigorous testing by Wi-Fi Alliance and has demonstrated interoperability with other products, including those from other companies that bear the Wi-Fi CERTIFIED Logo.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
The terms HDMI®, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

INTRODUCTION

This document includes statutory safety instructions and statements, guarantee information, and a CE Declaration of Conformity. Please read this document before installing
and using your Omnia.
This symbol Is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol Is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions

Read these instructions – All the safety and operating in instructions should be read before this product Is operated.
Keep these instructions – The safety and operating in instructions should be retained for future reference.
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and use instructions should be followed.
Do not use this apparatus near water
– The appliance should not be used near water or moisture
– for example, in a wet basement or near a swimming pool, and the like.
Clean only with a dry cloth.
Do not block any ventilation openings. Install In accor dance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli fiers) that produce heat.
Do not defeat the safety purpose of the polarized plug, 1f provided. A polarized plug has two blades one wider than the other. The wide blade or the third prong is provi ded for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where It exits from the apparatus.
Only use attachments/accessories specified by the ma manufacturer.
Unplug the apparatus during lightning storms or when unused for long periods of time.
.Refer all servicing to qualified service personnel. Serv1cIng Is required when the apparatus has been damaged in any way, such as; the power-supply cord or plug Is da damaged, liquid has been spilt or objects have fallen into the apparatus, the apparatus has been exposed to ram or moisture, does not operate normally, or has been dropped.
CAUTION: Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained In the operating instructions unless you are qualified to do so.
Do not install this equipment in a confined or built-in space such as a bookcase or s1m1lar unit. The equipment must remain in well ventllat1on cond1t1ons. Ventilation should not be impeded by covering the ventilation openin gs with items such as newspaper, tablecloths, curtains etc.
WARNING: Only use attachments/accessories (such as the battery etc.) specified or provided by the manufacturer.
WARNING: Refer to the information on the underside of the enclosure for electrical and safety information before installing or operating the apparatus.
WARNING: To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture. The ap apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
CAUTION: Danger of explosion if battery Is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: The battery shall not be exposed to excessi ve heat such as sunshine, fire or the like.
WARNING: The appliance coupler Is used as a disconnect device, the disconnect device shall remain readily operable.
WARNING: DO NOT INGEST THE BATTERY. CHEMICAL BURN HAZARD.
This product contains a coin/button cell battery. If the battery Is swallowed, It can cause severe internal burns in Just 2 hours and can lead to death.
.Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep It away from children.
If you think batteries might have been swallowed or pla used inside any part of the body, seek immediate medical attention.
When the apparatus Is not in use or during its reloca on, take care of the power cord and plugs; e.g. tie up the power cord with a cable tie or similar. The tie must be free from sharp edges and the like that might cause abrasion of the power cord. When put into use again ensure the power cord and plugs are not damaged. If any damage is found the power cord and plugs should be replaced by items ei ther specified by the manufacturer or that have the same cha characteristics as the original items.
This equipment Is a Class II or double insulated electrical appliance. It has been designed In such a way that It does not require a safety connection to electrical earth.
This lightning flash with an arrowhead symbol within an equi lateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. WARNING: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
The exclamation point w1th1n an equilateral triangle Is intended to alert the user to the presence of important operating and maintenance instructions In the literature accompanying the appliance.
CAUTION: To prevent electric shock hazards, replace grille. (CSA 60065, clause 5.3A) – This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take It to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority. The European Waste Electri cal and Electronic Equipment (WEEE) D1rect1ve was imple mented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product Is still useable, consider giving It away or selling It.

FCC Statement
This device complies with FCC rad1ot1on exposure l1m1ts set forth for an uncontrolled environment. This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Closs B digital device, pursuant to Port 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference In a re s1dent1ol 1nstollot1on. This equipment generates, uses, and can radiate rad1ofrequency energy and, if not installed and used in accordance with the instructions, may cause har harmful interference to radio communications. However, there is no guarantee that interference will not occur In a par particular 1nstollot1on. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and re· server
Connect the equipment into an outlet on a circuit diffe rent from that to which the receiver Is connected
Consult the dealer or an experienced radio/TY technician for help.

Only operate the device in accordance with the instructions supplied. This device complies with FCC radiation exposure limits set forth for an uncontrolled envi ronment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s au authority to operate the equipment.

IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation Is subject to the following two conditions: (1) this advice may not cause in interference, and (2) this device must accept any interference, 1nclud1ng interference that may cause un desired operation of the device.
The device meets the exemption from the routine evalua tion limits In section 2.5 of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian 1nformat1on on RF exposure and compliance.
This equipment complies with IC rad1at1on exposure limits set forth for an uncontrolled environment.
This Class B d1g1tal apparatus complies with Canadian ICES-003.
This Category II rad1ocommunicat1on device complies with Industry Canada Standard RDD-310.

Guarantee Information
To the fullest extent permitted by applicable law, Sonus fo ber d1scla1ms all liability for any loss or damages whether real, incidental, or consequential that arise from using this
product. Sonus Faber, its agents, and representatives, can not be held responsible for the loss of any data or content from a Sonus server, however, caused. Do not under
any circumstances allow anyone to modify your Sonus fa ber equipment without first checking with the factory, your retailer, or your distributor.
Unauthorized modifications will invalidate your guarantee.

CE Declaration of Conformity
Sonus Faber declares that Sonus Faber products are in con formance with:

Low Voltage D1rect1ve 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU Restriction of Hazardous Substances (RoHS2) Directive 2011/65/EU
Waste of Electrical and Electronic Equipment Directive 2012/19/EU
Energy-related Product Directive 2009/125/EC
RED (Radio Equipment D1rect1ve) 2014/53/EU

Sonus for products comply with the following standards:

EN55032 – Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics.
EN55035 – Sound and television broadcast receivers and associated equipment – Immunity characteristics.
EN61000-3-2 – Mains harmonics current emissions.
EN61000-3-3 – Mains flicker emIssIons.
EN62368 – Audio/video, information, and communication technology equipment.
EN300328 – Wideband transmIssIon systems; Dato tron mission equipment operating In the 2,4 GHz ISM band and using wide band modulation techniques.
EN301893- 5 GHz RLAN; Harmonised Standard cove ring the essential requirements of article 3.2 of D1rect1ve 2014/53/EU.
EN62311- Assessment of electronic and electrical equi payment related to human exposure restrictions for electro magnetic fields (0 Hz – 300 GHz).
EN301489 1 and 17 – Electromagnetic compat1b11ity and Radio spectrum Matters (ERM); Electr0Magnet1c Compati bll1ty (EMC)
CARB (California Air Resources Boord) Phase 2 and TSCA Title VI – Sections 93120-93120.12, California Code of Regu lations to Reduce Formaldehyde Em1ss1ons from Compo site Wood Products and 40 CFR part 770 – Formaldehyde Standards for Composite Wood Products under the regulation of TSCA Title VI.

OMNIA
3-YEAR
WARRANTY
Register your Omnia on sonusfaber.com to extend the product’s warranty.
More information on: www.sonusfaber.com
Sonus Faber
ARTISAN OF SOUND

IF YOU WANT TO PERFORM A COMPLETE INSTALLATION OF YOUR OMNIA GO TO THE OMNIA WEB-BASED SETUP PAGE.

http://omnla-501E2D4CACB6.local/sonusfaber.fcgl

IF YOU WANT TO PERFORM A QUICK INSTALLATION FOLLOW THE OMNIA QUICK START GUIDE.

Sonus faber S.p.A. Via A.Meucci 10 | 36057 Arcugnano (VI) | ZI Sant’Agostino | Italy
Ph +39 0444 288788
info@sonusfaber.com
Sonus Faber reserves the right to change any technical and/or aesthetical feature of its products at any time without any previous notice.
sonusfaber.com