Shenzhen Chiheng Industrial LAKM-001 Remote Shutter Owner’s Manual
- June 5, 2024
- Shenzhen Chiheng Industrial
Table of Contents
Shenzhen Chiheng Industrial LAKM-001 Remote Shutter
Product Illustration
Specifications
MODELL Shutter
- Communication: V4.0
- Transmit frequency: 2.4GHz-2.4835GHz
- Communication distance: 10m(30ft)
- Battery life: CR2032 X1 cell/about 6 months under working in 10 times a day
- Dimension: 48mm X 30mm X 10mm
- Weight: About 89
Battery
How To Use
-
Paring
- a. Turn on the shutter by switching the on/off button, the shutter will enter into pairing mode and indicator LED starts flash quickly at the same time
- b.Actiave the function on your phone and sourcing the devices around
- c.Select the device of “AB Shutter3 ” from the list and paring will be finished autonmaticaly in few seconds
-
Select APP
Use inbuilt camera APP to taking the photos via i Shutter or you can download the APP of “camera 360” from Google play if in built camera cannot be supported, check the compatible device and APP in following instruction
-
Shooting
Select a correct APP and press the proper button on the shutter for 10S and Android phones to taking the photos.
Compatible devices
Compatible with Android 4.2.2 .0S.ornewer and ios 6.0.or newer 
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>