JUFENG JF-XVI-EQ4420-IR2 Bullet Camera User Manual
- June 5, 2024
- JUFENG
Table of Contents
JUFENG JF-XVI-EQ4420-IR2 Bullet Camera User Manual
Packing list
After open packing list box ,please check product body and accessories as blow:
Interface
Remark: The cover can be opened with a screwdriver
Operation
Download APP
Tips one:Scan OR code.
iCSee
Tips two :Search “iCSee” in the App store or Googleplay and download.
Power on
Install TF card first,then connect the camera to the power outlet.
Camera configuration
Wireless network configuration :
-
open the app “iCSee’,choose the login” (picturel ) (If you don’t have user name, please register first).
-
After Click -+” (picture 2).
-
Enter to “Add device “(picture 3),please input WiFi router password (picture 4).Then confirm .
-
After you hear a camera voice “connect successfully “,will enter to “set pwd” Then confirm(picture 5).
-
After ‘confirm will enter to ‘pick a name”(picture 6).
-
After click “save “will enter to video preview(picture 7 ).
Wired network configuration:
- After login successfully, click “+” in the upper right corner, and select the third way “Add device in the same WLAN” (picture 8);
- Enter into “Device Searching” interface, click on the searched camera (picture 9);The camera will be shown online, which indicates that the wired network configuration of camera is complete.
- Click to enter the view interface, and you can do related operations and settings.
FAQ
Q: How to store a video camera?
A: Currently, the camera supports FAT32G format Class6, Class10 TF Card,
max supports 128G.When the TF Card is full, it will delete earlier video
automatically and loop recording.
Q: The camera be offline, how to do?
A:
- Check the power and WiFi.
- Restart power on and restart the camera.
- Reconfigure the camera.
- Check the home broadband network.
Notice
While using this product, please modify the user password, to avoid the delinquents misappropriation. Do not install the equipment in damp, dusty, children easy access to the venue. Please allow within the scope of use and storage of temperature and humidity, do not disassemble it at will.
Directions
App and device firmware will have new update irregularly,you could upgrade it online at app setting,instructions are for reference only.
FCC Statements
Labelling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Information to user
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Warranty Card
Product
Name| | Model|
---|---|---|---
Purchase
Date| | Purchase
Store|
Cause|
Process|
Customer
Name| | Customer
Gender|
Customer
Phone| | ZIP|
Address|
Warranty period:one year. This warranty card is only for our company’s products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>