ECHO RB-85W Heavy Duty Turf Broadcast Spreader User Manual

: June 5, 2024
: ECHO

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ECHO RB-85W Heavy Duty Turf Broadcast Spreader

INTRODUCTION

Specifications, descriptions, and illustrative material in this literature are as accurate as possible. Specifications are subject to change without notice.
Illustrations might include optional equipment and accessories, and might not include all standard equipment. Your equipment might appear slightly different than pictured equipment.
Read and understand all provided literature. The literature contains specifications and information for safety, operation, maintenance, storage, and assembly specific to this product. Scan QR codes for
more information.
For additional literature, including safety manuals where applicable, or questions regarding terms used in this manual, visit:
https://www.echo-usa.com/manuals

SERVICING INFORMATION

Parts and Serial Number
Genuine ECHO parts and assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts alway shave the model number and serial number of the unit with you. For future reference write them in the space provided below.

Service

Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site www.echo- usa.com. When presenting your unit for Warranty service/ repairs, proof of purchase is required.

ECHO Consumer Product Support

If you require assistance or have questions concerning the application, operation, or maintenance of this product, call the ECHO Consumer Product Support Department at 1-800-432-ECHO (3246) from 8:00 a.m. to 5:00 p.m. (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.

Product Registration
Register your ECHO equipment online at www.echo-usa.com or by filling out the product registration sheet included in this manual. Registering you product confirms warranty coverage and provides a direct link to ECHO if we find it necessary to contact you.

Additional Literature
In addition to finding information online, information is available from your Authorized ECHO Service Dealer, or by contacting ECHO Incorporated, 400 Oakwood Road, Lake Zurich, IL 60047, 1-800-432-ECHO (3246).

SAFETY

Safety Information

WARNING

Carefully read these instructions before use. Improper use or failure to follow instructions can result in product failure or injuries. For safe use of this product, you must read and follow all instructions before using it.
Cancer and Reproductive Harm www.P65Warnings.ca.gov.
Do not allow anyone to operate the broadcast spreader without proper instructions.
Do not permit children to operate the broadcast spreader.
Wear all personal protective equipment recommended by chemical manufacturers.
Read and follow the chemical label instructions and
warnings for handling and applying the chemicals you plan to spread application settings provided are only a guideline.

DESCRIPTION

Handles
Hopper
Wheels
Adjustable Deflectors
Gate Control Rod
Gate Control Lever
Gate Adjustment Limiter

CONTENTS

The product you purchased has been partially factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or Dealer of damaged or missing parts. Use the contents list to check for missing parts.

1 Hopper Assembly
2 Wheels
1 Upper Handle Assembly
1 Gate Control Rod
1 Control Rod Adapter
1 Grate
1 Hopper Cover
1 6 mm Nut
1 Cotter Pin
5 6 mm Flange Nuts
2 6 x 60 mm Bolts
1 6 x 50 mm Bolt
1 Metal Washer
1 Nylon Washer
1 Rear Deflector
1 Operator’s Manual
1 Warranty Statement

ASSEMBLY

Install Wheels and Handle

Install left wheel and secure with washer (A) and cotter pin (B).
Install the right wheel and secure it with 6 x 50 mm bolt (C) and 6 mm flange nut (D).
Install upper handle assembly (E) into lower handle bracket (F), and secure with two 6 x 60 mm bolts (G) and two 6 mm flange nuts (H).

Install Gate Control Rod

Insert tab end of gate control rod (C) into the slotted hole in gate control lever (B). Turn rod clockwise until it is parallel with handle assembly.
Thread 6mm nut (C) onto end of gate control rod to a distance of 25.4 mm (1 in) from the bottom of rod.
Insert threaded end of rod into hole in control rod adapter (D). Then thread 6 mm flange nut (E) onto gate control rod. Assure nuts remain spaced as shown.
Attach control rod adapter to gate linkage (F). Secure with 6 mm flange nut (G) and nylon washer (H).
Tighten nut until snug, then loosen nut 1/4 turn to allow hinge movement.
Push control rod adapter (D) downward until gate is fully closed.
Position gate control lever fully forward, and tighten control rod nut and flange nut as shown.

Install Grate

Align notches in the grate (A) with tabs (B) in the hopper.
Install grate into a hopper. Turn grate clockwise to lock into place.

Rear Deflector

Install rear deflector (A) as shown.
Adjust deflectors (C) to the desired angle for spreading range.
Note: With deflectors closed, the product will spread 1. 07 m (3.5 ft). With deflectors fully open, the product will spread 1.88 – 2.44 m (6-8 ft), depending on rate of travel.
Pull the gate control lever backward to set the gate to desired opening size. Use gate adjustment limiter (B) to restrict gate opening size.
Push gate control lever (A) fully forward to close gate. Fill the hopper with the product. Fill the hopper in an area that won’t be damaged by spilled product.
Start the spreader in motion, and pull gate control lever back to begin the flow of the product.
Move the gate control lever forward to close gate before turning or stopping.

MAINTENANCE

Cleaning Spreader

Avoid spraying the gear case directly, and do not use a pressure washer on the spreader.

Wash spreader with a garden hose after each use.

Lubrication

Gear case and Axle: Clear debris from grease fittings (A). Apply 1-2 pumps of lithium-based grease with an appropriate grease gun. Clean excess grease from grease fittings.

SPECIFICATIONS

MODEL	RB-85W
Length	1,194 mm (47 in.)
Width	654 mm (25.75 in.)
Height	952 mm (37.50 in.)
Weight	17.50 kg (38.50 lb.)

PRODUCT REGISTRATION

Thank you for choosing ECHO Power Equipment
Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product online. It’s FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Incorporated. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
If you do not have access to the Internet, you can complete the form below and mail to:
ECHO Incorporated, Product Registration, PO Box 1139, Lake Zurich, IL 60047.