NGS Wild Dub 2 12 Inch Double Woofer Speaker User Manual

NGS Wild Dub 2 12 Inch Double Woofer Speaker

CONTROL BUTTONS

TOP PANEL DESCRIPTION

1. USB input

2. Microphone input / Guitar input

3. SD card input

4. Microphone volume
   Control the microphone volume in all modes, from CV00 to CV16. In TWS mode, this function is not available.

5. Volume +/–
   Control volume in all modes, from VL00 to VL32

6. Treble +/–
   Adjust the treble, from –9 to 9

7. Bass +/–
   Adjust the bass, from –9 to 9

8. Previous
   In USB / SD / Bluetooth modes, tap to skip back to the previous song

9. Equalizer / Mega Bass
   Tap the equalizer to browse through different styles of music: NOR, rock, jazz, classical, pop, country Press and hold: Select on / off for mega bass function

10. Play / Pause
    Under USB / SD modes, this button is play/pause In BT mode, tap to play / pause In TWS mode, press and hold to connect and disconnect the TWS (5 seconds) Under AUX-IN mode, this button has no function

11. Mode
    Press shortly to skip to Wireless BT / AUX-IN / USB / SD modes In BT mode, press and hold to disconnect Bluetooth (3 seconds)

12. Next
    Under USB / SD / BT modes, tap to skip forward to the next song

13. Standby mode
    By pressing standby, all functions will stop working

14. Echo
    Press and adjust the value with the multifunction from EC00 to EC30

15. Guitar volume
    Control the guitar volume under guitar-input mode
    BACK PANEL DESCRIPTION

16. POWER
    Power on / off

17. LIGHT SW
    Turn on / off the light

18. AC IN
    For connecting the AC cable to get power supply

19. AUX OUT
    To connect more speakers togheter

20. AUX-IN
    For connecting the external device under AUX-IN mode

Note:
To fully disconnect the electrical cable, please disconnect the plug from the electrical power point it is connected to. The base of the power point should be easy to access.

USING THE REMOTE CONTROL

Installing the batteries
Remove the battery cover from the back of the remote control as shown and insert 2xAAA size batteries ensuring correct polarity.

Note: Please point at the LED screen when you are using the remote controller

1. Mute
   Press this button, sound off. Press again, sound on

2. Previous
   Under USB / SD / Bluetooth mode, press shortly for previous sound source

3. MODE
   Press shortly to skip to Wireless BT / AUX-IN / USB (with USB card plug in) / SD (with SD card plug in) mode

4. REC
   Under any mode, press “REC” button to record sound with connected microphone and record in USB stick / SD card

5. LIGHT
   The color changes from red, green, blue, purple four-color automatically. Press “LIGHT” button, the light will twinkle & change color with the music. Press the “LIGHT” again, the light will be off.

6. BASS +/–
   Adjust the bass

7. M. VOL +/–
   Control the microphone volume

8. Play / Pause
   Under USB / SD / BT modes, this button is play/pause Under AUX-IN mode, this button has no function

9. STANDBY
   Press shortly to put speaker in standby Press again to turn on speaker

10. Next
    Under USB / SD / BT modes, press shortly for next song

11. VOICE
    Sound effects key which can emphasize the voice

12. REPEAT
    Repeat one, repeat all (only available under USB / SD modes)

13. REC PLAY
    Play the recorded files into USB / SD

14. R-DEL
    Delete the recorded file (only available under REC PLAY mode)

15. RGB
    Change LED lights colours between red, green and blue

16. M-PRI
    Gives priority to mic voice against music

17. TREBLE +/–
    Adjust the treble

18. EQ
    Equalizer to browse through different music styles: NOR, rock, jazz, classical, pop, country

19. VOL +/–
    Control the volume

20. 0-9 keys
    Under USB / SD modes to select songs For other modes, number buttons have no function

AUX IN, USB/SD, BLUETOOTH

To switch from one mode to another press the MODE button. If the device is not connected to a USB stick or an SD card, these modes will be omitted.

1. AUX IN
   With the attached audio cable, you can connect the device with the external multimedia audio sources through the port “AUX”. After connection, just set the mode to AUX by pressing the MODE button on the device. At this time, the AUX indicator will be displayed on the screen, suggesting the device can play the audio files from multimedia sources like PC, mobile phone, MP3 and MP4, etc.
   Note: In AUX IN mode, the forward and rewind song functions will not operate. They must be accessed through the auxiliary device directly.

2. USB/SD CARD PLAYING
   Insert the SD card or a USB Flash memory stick into the corresponding slot. The device will automatically play any music in MP3 format on the card.

3. BLUETOOTH MODE

   • Press the MODE button until the word “BLUE” appears on the screen. The icon will start to flash. In Bluetooth mode the device goes into searching / paring / reconnect mode for pair.
   • Now, turn ON the Bluetooth function on your mobile phone.
   • Search for “NGS WILDDUB” and select it to pair (for first time pairing or pairing a new mobile device). Once connected, the icon will stop flashing.
   • The Bluetooth speaker will be reconnecting automatically if your mobile phone has been paired (Depend on the of mobile phone’s type and configuration, manual reconnection may require on some devices).

4. TWS

   • Change the two speaker in the BT mode, then press the PLAY/PAUSE button on one speaker for 5 seconds.
   • You’ll hear a beep and ON will appear on the main screen and PAUSE on the secondary screen.
   • Search your mobile device for NGS WILDDUB and it will hook up.

BUILT-IN RECORDING FUNCTION

1. Plug in a microphone to the MIC IN input
2. Insert USB/SD card into the corresponding port, press MODE button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first time, the system will automatically create a folder named RECORD to save recorded files (FAT32 USB file system is supported).
4. When you are ready to record, press REC button to go to recording mode. The current sound output will stop and the MICRO mode will be activated, the screen shows the recording time. The device starts recording when the screen shows 00:01 and users can use the microphone to record.

TECHNICAL SPECIFICATIONS

• TWS
  USB / SD / BT / AUX inputs

• Microphone input

• Guitar input

• LED screen

• LED lights

• AUX output

• Input voltage: AC 100V-240V 50/60Hz

• Frequency range: 20Hz ~ 20kHz

Output power

• (Peak power): 1200W 800W
• Bluetooth operation frequency: 2402-2480 MHz 2402-2480 MHz
• Max RF output power: 6.37 dBm 6.37 dBm
• Woofer size: 2 x 15” 2 x 12”
• Tweeter size: 2 x 6” 2 x 4”
• RMS power: 120W 100W

If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>