NGS Spark BT Hero Hands Free FM Transmitter with Bluetooth User Manual
- June 2, 2024
- NGS
Table of Contents
Spark BT Hero Hands Free FM Transmitter with Bluetooth
User Manual
OVERVIEW
| 1 | LED Display | 8 | Previous |
|---|---|---|---|
| 2 | PD 24W charging port | 9 | Next |
| 3 | QC3.0 charging port | 10 | Heat dissipation |
| 4 | Phone & Siri / Google assistant | 11 | Aux jack |
| 5 | Auto-Scan & Power on / off | 12 | Negative pole |
| 6 | Microphone | 13 | Positive pole |
| 7 | Metal Rotatory knob | 14 | Cigar plug |
POWER ON/OFF
BLUETOOTH
FM RADIO CONNECT
AUTO
MANUAL
MUSIC CONTROLS USING THE FM CHANNELS
- Make sure the smartphone is connected to the FM Transmitter
- Make sure FM Transmitter and Car radio system are paired and in the same FM Channel
- Press play/pause in your smartphone to control music
- To adjust volume, use the rotatory knob of the FM Transmitter
- To go to previous or next song, use the buttons on top of the FM Transmitter (refer to point “8” and “9” of the product’s diagram in page 1)
PHONE CALLS
Short press “phone” button to pick up or hang up an incoming call
Short press x2 times “phone” button to re-dial last dialed phone number
SIRI/GOOGLE ASSISTANT
1 Make sure the smartphone is connected to the FM Transmitter
- Press & hold for 3 seconds “phone” button
- Your smartphone voice assistant will be waken up *
-
This feature depends on your phone brand / model and its settings. For more detailed information, refer to our technical team
MUSIC CONTROLS USING THE AU OUTPUT- If available in your car, select the “Aux input” mode
- Make sure the smartphone is connected to the FM Transmitter
- Connect your car and FM Transmitter (reefer to point “11” in page 1) using the included jack 3.5mm audio cable
- Control the music from your smartphone
CHARGING OPTIONS
A Connect the USB-C cable to point “2” in page 1 and connect the other end to your smartphone/tablet
B Connect the USB-B cable to point “3” in page 1 and connect the other end to your smartphone/tablet
SPECIFICATIONS
Auto-Scan best available FM frecuency
Siri & Google assistant activation
Noise Cancellation for clear talking
3.5mm aux-out jack
Bluetooth 5.1
Charger output: 42W (PD24W + QC3.0)
Frequency range: 87.5 – 108.0MHz
Frequency stability: ±10 ppm
Product Input: 12-24V
Music Format: MP3, WAV, APE, FLAC
Product size: 5640103mm
Weight: 55g
Material: ABS + Aluminum
Transmission Power <50nW
If at any time in the future you should need to dispose of this product please
note that:
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
DECLARATION OF CONFORMITY
WE, AUTHORIZED REPRESENTATIVE, LURBE GRUP S.A, SAN SEBASTIÁN, SPAIN,
DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCT:
NGS: Hands Free FM Transmitter
MODEL: BT SPARK HERO
| EN 55032:2015/A11:2020 | ETSI EN 301 489-9 V2.1.1 (2019-04) |
|---|---|
| EN 55035:2017/A11:2020 | ETSI EN 301 489-17 V3.2.4 (2020-09) |
| EN 62479:2010 | ETSI EN 300 328 V2.2.2 (2019-07) |
| EN 50663:2017 | EN 301 357 V2.1.1 (2017-06) |
| ETSI EN 301 489-1 V2.2.3 (2019-11) | EN 62368-1 :2014+A1 :2017 |
AND THEREFORE COMPLY WITH THE ESSENTIAL REQUIREMENTS AND PROVISIONS OF THE
FOLLOWING DIRECTIVES OF THE EUROPEAN PARLIAMENT AND EUROPEAN COUNCIL:
RADIO EQUIPMENT DIRECTIVE 2014/53/EU
ROHS DIRECTIVE 2011/65/EU & (EU) 2015/863
AUTHORIZED REPRESENTATIVE: LURBE GRUP S.A
CHRISTIAN FALCON
technical support: www.ngs.eu/support
www.ngs.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>