Shenzhen 2AQ3A FUSION2 Wireless Earbuds User Manual
- June 5, 2024
- Shenzhen
Table of Contents
FUSION2 Wireless Earbuds
User Manual
Packing List
Product Overview
Charging Case
Earbuds
Charge
Fully charge the Charging Case and earbuds before your first use.
Charging Case
Option 1
Connect the Charging Case to a compatible adapter (not included) with the
Type-C cable, then plug the adapter into a socket.
Option 2
Put the Charging Case on the wireless charger (not included) and it will be
charged.
Earbuds
Align the Charging Pins on the earbuds with those in the case, then place the
earbuds into the case until it magnetically snaps into the Charging Slot.
- Charging: pulse blue
- Fully Charged: solid blue for 5 seconds, then be off
- Low Battery: flash blue twice for every 3 seconds
Power On
Option 1
Open the Charging Case and take the earbuds out to power on.
Option 2
When the earbuds are not in the case and in power-off status, touch and hold
the Touchpad for 1 second to power on.
Pair
Step 1
When the LED Indicator on one earbud flashes blue quickly, and the other
flashes blue once every 5 seconds, pair the earbuds with your mobile device
within 60 seconds.
Tip: If there is no earbud flashing blue quickly, place the earbuds back
into the case and take them out again.
Step 2
Enable Bluetooth on your device, search and connect to Fusion2.
The
LED Indicators on the earbuds pulse blue for every 3 seconds and you will hear
“Connected” from the earbuds if the connection is successful.
Wear the Earbuds
If the ear tips don’t fit your ears, you can replace them with the new ones we provided.
Fit
the earbuds into your ears.
Functions
Volume
| Volume Up | Tap the Touchpad of the Right(R) Earbud twice |
|---|---|
| Volume Down | Tap the Touchpad of the Left(L) Earbud twice |
Music
| Play/Pause | Tap the Touchpad of either earbud once |
|---|---|
| Previous | Touch and hold the Touchpad of the Left(L) Earbud for 2 seconds |
| Next | Touch and hold the Touchpad of the Right(R) Earbud for 2 seconds |
Call
| Accept/End | Tap the Touchpad of either earbud once |
|---|---|
| Decline | Touch and hold the Touchpad of either earbud for 2 seconds |
Activate Voice Assistant
When you’re not listening to music or watching videos, tap the Touchpad of
either earbud 3 times to wake up the voice assistant.
Power Off
Option 1 Place the earbuds back into the case to automatically power off.
Option 2 Touch and hold the Touchpad for 5 seconds to power off the
earbuds.
Option 3 If there is no connection with a Bluetooth device within 3
minutes after powering on, the earbuds will automatically power off.
Reset
When your mobile phone can’t be paired with the earbuds, place two earbuds
into the Charging Case, then simultaneously touch and hold the Touchpad of two
earbuds for 5 seconds until the LED Indicators are off for 1 second, which
indicates the earbuds have been reset successfully.
Specification
| Power Supply | 5V 0.5A |
|---|---|
| BT Version | V5.0 |
| Frequency Range | 2402∼2480MHz |
| Transmit Power (EIRP) | <8d Bm (for CE) |
| Battery Capacity of the Charging Case | 400mAh |
| Charging Time for the Earbud | 1 Hour |
| Charging Time for the Charging Case | 1.5-2 Hours |
| Playtime | Up to 8 Hours (with 50% volume) |
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID:2AQ3A.FUSION2
ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
The device is in compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE).
The symbol indicates DC voltage
** RECYCLING
This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
NOTES:**
- High Sound Pressure
- Hearing Damage Risk
- Do not listen at high volume levels for long periods.
Manufacturer: Shenzhen VanTop Technology & Innovation Co., Ltd. Manufacturer address: 502, 5th Flr. BLDG 4, MinQi Technology Park, No. 65 Lishan Road, Taoyuan Street, Nanshan District, Shenzhen, China
C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933,
Frankfurt am Main, Germany
Info@ce-connection.de
Support
North America: support@cystereo.com
United Kingdom: support.uk@cystereo.com
|
|
---|---|---
https://qrs.ly/djbiamj| https://qrs.ly/blbiam2| https://qrs.ly/gfbiam3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>