AiRROBO P20 Robot Vacuum Cleaner User Manual

AiRROBO P20 Robot Vacuum Cleaner

AIRROBO is a smart home appliance brand with a focus on Al-enabled technologies. Supported by a world-leading enterprise in humanoid robotics field, AIRROBO is aiming to bring the most cutting-edge technology to more and more households around the globe, making smart home a new norm of life.

Tips:
Scan the QR code to check and download the up-to-date
E-manual and get discount on accessories

Thank you for purchasing AIRROBO ROBOT VACUUM CLEANER (Hereinafter referred to as robot).

• It is strongly recommended to read the user manual comprehensively, including proper use, safety information and maintenance instructions for AlRROBO robot before using.
• The user manual offers instructions only. If any other situations that you encounter are not addressed in this user manual, please contact our customer service support.airrobo@ubtrobot.com for product technical support.
• This user manual will be updated upon new software or hardware updates, content and images will be updated without further notice.

Part 1 Important information

Before first use

• Unbox it and remove all protective packaging and wrappings. Check if all parts are included.
• Before first use, please make sure that the power switch is switched on and you have removed all obstacles from the surroundings. It will pass Over each section of the floor several times to build up the map through cleaning
• The side brushes may occasionally flick small particles around, but the robot will pick them up eventually. Please ermpty the dustbin after each use to guarantee the optimal performance afterwards.
• The robot may not be able to clean up dirt and dust if its dustbin is full. It is recommended to clean the dustbin regularly.
• Please make sure that the packaging and wrappings are properly discarded or safely stored. For safety purpose, please keep the packaging and wrappings away from intants and children.
• Before cleaning, please make sure to install the two side brushes in the corresponding positions of the robot and fasten them.

WARNING

• Only authorized technicians are allowed to dismantle the robot. Users must not dismantle or repair it.
• Please use the original adapter provided by the manufacturer only. Incompatible adapters may cause electric shock, fire, or damage to the robot.
• Do not touch the plug or the adapter with wet hands.
• Please clear the floor before using the robot by removing all fragile and lightweight items, such as cables, clothes, tissues and curtains, as they might get tangled in it.
• Do not use the robot to pick up cigarettes, lighters, matches or other flammable materials.
• Do not use force to bend the power cable and do not let it bear with pressure from heavy or sharp objects.
• Do not use the robot outdoors. It is only for using indoors.
• Do not sit on the robot or place any objects on top of it.
• Do not use the robot in a wet or damp environment.
• Only use the robot in the temperature range between 0°C and 45°C (degrees Celsius).
• Do not use the robot in a suspended environment. Ifyou must use it in a suspended environment, prevent it from accidentally talling with firm protective fences, as it may cause personal injury or property damage.
• Turn off the power if the robot left unused for an extended period.
• Inform everyone at home or in the office when the robot is working in the same place so that no one trips over it
• Disconnect the robot from the power supply before removing the battery.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concening use of the appliance in a sate way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Children should be supervised to ensure that they do not play with the appliance.
• To maintain the robot and charging base, please turn off the robot ftirst, unplug it from the socket, and disconnect the power supply.

Battery and Charging

• It is forbidden to incinerate the product. Even if it is severely damaged, the battery may explode.

• Do not use any third-party batteries, or charging bases.

• Do not dismantle, repair, or modify the battery and charging base.

• Do not place the charging base near a heat source, such as heater

• Do not wipe or clean the charging base with wet cloth or wet hands.

• Do not throw away old batteries. The disposal of old batteries should be handled by a professional recycling agency.

• If the power cord is damaged, it must be replaced by a professional technician authorized by the manufacturer, for personal safety.

• Please make sure the robot is turned off and it’s recommended to use the original packaging during transportation.

• If unused for an extended period, please turn the robot off after having fully charged it and store it in a cool and dry place.

• Charge the robot at least once every three months to avoid damage to the battery due
  to excessive discharge

• Use the right tool to take out the battery when needed. The power supply must be disconnected when removing the battery. First, remove the bottom cover screw, then open the bottom cover. Unplug the battery connector, and finally, remove the battery from the battery compartment.

• Before discarding the robot, the battery must be removed from it.

• This appliance contains batteries that are non-replaceable. When the battery is at end of life, the appliance shall be properly disposed of.

Part 2 Product overview

Packing list

• Main unit

• Charging base

• Dustbin
  Notes: Press the dustbin release buckle and use the other hand to open the dustbin by opening the dustbin cover.

• Remote control

Installation and Use:

• Install two AAA batteries in the remote control battery compartment, making sure the positive and negative ends are pointing in the correct direction. Turn on the power Switch on the side of the robot.
• When the robot is not connected to Wi-Fi network, you can still operate it with the remote control.
• If you press any direction button to start the robot when it is on the charging base, the robot will pull out of the base and turn 180, then you can control it remotely through the remote control.
• Remove the batteries if you will not use the remote control for a long time.

Part 3 Installation and operation

Connect the charging base
Assemble the charging base and plug the adapter into a wall socket.
Place the charging base againsta wall and keep the surrounding space of about l meter (3 teet) on either side and about 2 meters (6 teet) in front of the charging base clear of any obstructions. The power indicator will be on to show good power connection.

Charging the robot for the first time
Place the robot on the charging base to charge, making sure that the contact points are aligned with the charging base.

To better maintain the battery life:

1. Keep charging the robot for 4-6 hours before first use. When fully charged, the indicator will stop blinking.
2. During the normal use, the robot will automatically come back to its charging base,
3. Connected to the power supply, to charge.
4. If the robot will not be used for a long time, please turn oft the power atter it is fully charged and place it in a dry and cool environment. Please charge it every three months to avoid irreversible damage to the battery.

Notes:

• Before using, remove the protective strip and bumper stopper on the bumper to guarantee normal product use.
• The power switch is on the side of the robot, press / to turn it on, and press O to turn it off.
• The robot will automatically return to the charging base when the battery runs low.

App Download and Wi-Fi Connection
Notes: Please make sure the robot and mobile phone are both in the effective coverage area of the same Wi-Fi router while connecting the robot to W-FI. Please follow the below instructions or the prompts in the app to connect. If the connection fails, it’s probably because you are using a 5 GHs network. Please check out Common router setting method and change it to 2.4GHz.

1. Scan the QR code or search AlRROBO in App Store or Google Play to download the APP.
   • Please make sure your phone is connected to a 2.4GHz Wi-Fi network and turn on the Bluetooth before downloading app.
   • Tun on the power switch on the side of the robot and press the switch to position. The robot can then enter the cenfiguratign mode
2. 2. Login the AIRROBO APP. For new users, please create your account before login.
3. Click Add device] or press I+] to add the robot.
4. Select a 2.4GHz Wi-Fi network and enter your Wi-Fi name and password. Please note that a dual-band with mixed-mode (2.4GHz+ 5GHz) or simply 5GHz Wi-Fi network will not be able to connect the robot.
5. Added successfully! Click [Done] to enter the next step.
6. Now you can operate the robot through the AlRROBO APP.

Tips:

1. Due to the update of Airrobo App, the actual use may be slightly different from the above. Please follow the current in-app guides while using

2. If your device is unable to be found or if you are prompted with a configuration timeout after pairing for several times, please do as follows before trying again. ResettingWI-Fi connection on your device: press and hold [O+[O) for 3 econds before turning on, turning off and trying again.Clearing App cache:
   Me-Settings – Clear Cache

3. The App is currently not compatible with Android tablets and iPads.

4. To use the App properly, please turn on Basic Google services if you are using an Android phone.

Operation

1. Auto Cleaning
   Once activated, the robot will plan the cleaning route in a zigzag pattern, and finish cleaning by cleaning along rooms’ edge. When the cleaning is complete, it will automatically return to the charging base to charge.

2. Spot cleaning
   Use the remote control to place the robot or manually place it in a corner of the area to be cleaned. Tap the Spot button in the App or press the Spot cleaning buttonon the remote control to active this mode, then it will start cleaning this area from current placement, in zigzag route.

3. Spiral cleaning
   Use the remote control to place the robot or manually place it in the center of the area to be cleaned. Tap the Spiral button in the App or press the Spiral cleaning button(Jon the remote control to active this mode, then it will start cleaning this area trom current placement, in spiral route.

4. Edge cleaning
   Once activated, the robot will find the wall and clean along the wall automatically. When the cleaning is complete, it will return to the charging base to charge.

5. Scheduled cleaning
   Tap the Settings button in the app, set a cleaning time, then the robot will start to clean at the specified time. When the cleaning is complete, it will go back to the charging base to charge.

6. Reset Wi-Fi
   When you need to connect the robot with other mobile phones, or when the mobile phone fails to connect to it, you need to reset the Wi-Fi. Press and hold both of the Clean button()and the Home uttonon the robot for 3 seconds, or press and hold the Reset Wi-Fi buttonon the remote control for 3 seconds until you hear the voice prompt. The Clean button())on the robot will flash rapidly in  range, indicating that the Wi-Fi has successfully been reset. Return to the main interface in the App and click Add to connect the robot.

7. Suction level
   Tap the Suction Level button on the remote control or in the app, then you can select among Quiet, Standard, and Powerful.

Part 4 Specifications

Part 5 Declaration of Conformity

FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interterence that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interterence to radio communications.
However, there is no guarantee that interference will not ocCur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorientor relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be cO-located or operating in conjunction with any other
antenna or transmitter

ISEDCTO CANADIAN USERS
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and EConomic Development Canada’s license-exempt RSS(S).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   This Class B digital apparatus complies with Canadian ICES 003.
   This device complies with RSS – 247 of ISEDC. Operation is subject to the condition that this device does not cause harmful interference

IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of  0 cm between the adiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities  or
more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity
Product description: Robot Vacuum Cleaner
Type designation(s): P20
Trademark: AIRROB0
Hereby
Name of manufacturer: Best Epoch Technology Co., Ltd
Address:2201, Block C1, Nanshan iPark, No. 1001 Xueyuan Road, Nanshan District, Shenzhen City, C
P.R declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation: European Directive (2014/53/EU)
The following harmonized standards and/or other relevant standards have been applied, which incl for Article 3.la Health, Article 3.1b EMC, Article 3.2 Radio Spectrum requirements and Article 3.la Ele

Safety requirements:

• EN IEC S5U14-1:2021

• EN IEC 55014-2:2021
  we,

• EN IEC 61000-3-2:2019+A1:2021

• EN 61000-3-3:2013+A1:2019+A2:2021

• ETSI EN 301 489-1 V2.2.3 (2019-11)

• ETSI EN 301 489-17 V3.2.4 (2020-09)

• EN 300 328 V2.2.2 (2019-07)

• EN 62311:2020

• EN 60335-2-2:2010+A11:2012+Al:2013

• EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019+A15:2021

• EN 62233:2008

• The performed the conformity assessment according to the European Directive, The laboratory issu the report is Bay Area Compliance Laboratories Corp.(Dongguan).

• The Technical Documentation (TD) .relevant to the product described above and which support this is available from the EU contact address on this Doc.

Signed for and on behalf of: Best Epoch Technology Co., LTD.
Place: Shenzhen, China.
Name: Lucia Liu
Position: Certification Engineer
Date: May 27, 2022
Signature:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>