AiRROBO Kleanbe 24W Air Purifiers Instruction Manual

Operating Manual Kleanbe24w

Kleanbe 24W Air Purifiers

Products shall be subject to physical object

• Please read this manual carefully before use
• Please keep it in a safe place for future reference
• After the customer purchases this product. please match the corresponding accessories and instructions in the manual according to the model of the machine. If there are any errors or omissions, please report to the corresponding dealer in time. I wish you a happy use!

Precautions for safe use

In order to ensure that you use this product correctly and safely and avoid harm to you and others, please read this manual carefully and observe the following safety precautions:

1. To use this product, you must use a suitable power outlet. If you find that the plug is inconsistent with your socket, please ask a professional electrician to install a suitable socket for you. Please do not modify the plug itself in any way.
2. Before connecting the product to the power supply, first confirm whether the voltage marked on the product is consistent with the local voltage.
3. When the power cable is damaged or the plug is frayed, do not use it. Please go to the repair point designated by the manufacturer to replace it.
4. Do not pull out the plug by pulling the power cord. The correct way is to hold the plug firmly and pull it out from the socket.
5. If you do not use it for a long time, you must pull out the plug to avoid electric shock and other accidents.
6. The power plug should be kept firmly in contact with the socket to avoid fire.
7. When there is leakage of flammable gas such as gas, do not unplug the power plug of the machine.
8. Cleaning and maintenance. Please unplug the power plug before replacing the filter to prevent electric shock.
9. Please do not block the air inlet and outlet, so as not to block the normal air outlet.

Prohibited matters:
Do not use non-standard power adapters.
Do not disassemble the host without authorization (except for some operations permitted in the manual).
Don’t get wet. and don’t store in high temperature (60°) environment.
Do not hit the machine violently.
Do not touch flammable substances or sources of ignition.

Precautions:
Do not use pesticides or the like when this product is running, otherwise it will accumulate pharmaceutical ingredients nside the machine, which is harmful to human health.
After power-on, the operation panel and the display will be on for 2 seconds and then go out, and a long beep will be heard at the same time; when the power is on, the PM2.5 sensor reading has a certain hysteresis, please wait patiently for 10s. These are normal phenomena.
Due to product update iterations, if there is any difference in this manual, please refer to the actual product.
The product cannot be used by people (including children) who lack physical, organ or mental abilities or lack experience knowledge, unless they are under the supervision of other safety personnel or provide product instructions for use.

Product parameter configuration

Rated voltage: DC24V
Timing:1-24H
Rated input power:15W
WIFI control function: applied if necessary
CADR value : 260 m3/h
Applicable area : 1186ft 2| Product Size : 8.48.414 inch

The whole machine and accessories

Product structure instruction

Operation instructions

| Power on and off
Touch the machine Power key ” “ to turn it on/off. The auto mode is entered by default after power-on, and the indicator light of the corresponding icon is always on when the corresponding function is turned on after power-on. “———” is displayed in the digital area in the first 10s after power-on, and the VOC value is displayed in real time after 10s.
---|---
| Mute
Touch the “ ” the voice of operating will be silent
| Anion purification
Touch the negative ion key “ ” of the machine to turn on/off the negative ion function. Release 50 million under ions per second.
Negative ions are vitamins of air. Open the negative ion mode to remove odor, purify the air, and make the air update fresh
| Intelligent
Touch the machine’s smart key” ” to enter the automatic mode, and the volume position will automatically switch according to the VOC value;
| Sleep mode
When it is not in the sleep mode, touch the sleep button ” “to enter the sleep mode, and the manual mode or automatic mode can be released at the same time. (In the sleep mode, the display is off, and only the indicator lamp corresponding to the sleep button is on).In the sleep mode, press any button to cancel the sleep mode and enter the first wind speed mode.
| Wind speed adjustment
Touch the machine wind speed key ” “to release the automatic mode and enter the manual adjustment made, select 1~5 gears cyclically, and the corresponding lamp beads will light up.
| Timer shutdown function
Touch the machine timing key “ ” to set the working time of the machine, from 1-24h, off, and cycle selection. When the timing function is on, the indicator light is on.
| Filter
When the cumulative working time of 2000h is detected during the filter work, the filter icon “ ” lights up. At this time press and hold the “ ” button for 5 seconds to reset after replacing the new filter on the machine.
---|---
| LED light
Touch the machine light key “ ” to select 7 colorful dazzling lights.
| V-Chip Mode
Press button “ ” of the machine to turn on the key screen lock screen state. In the V-Chip state, pressing all the keys will prompt two short beeps to indicate that the function keys are locked. Only long press for 3 seconds to release the child lock, or power off and restart.

Quick use guide

The encapsulated filter is already installed on the product you purchased. Please remove the plastic bag of the filter according to the steps shown below before use, and install and use it correctly.

1. Open the outer packaging and take out the machine
2. Turn the machine over. twist the bottom cover to the unlocking direction, and take out the packaged filter
3. Remove the plastic bag and take the filter
4. The filter is fixed on the bottom cover
5. Close the bottom cover and twist to the lock direction
6. Plug the power adapter cord into the machine
7. Plug the power adapter into the socket
8. Press the On/Off key to run the machine

Maintenance

Note: When preparing for maintenance , please unplug the power cord in advance to prevent electric shock; product care and filter maintenance require disassembly of some parts. For detailed steps, please follow the fifth point. Filter replacement:

1. When the cumulative working time of 2000h is detected during the filter work, the filter icon lights up. At this time, the new filter must be replaced on the machine, long press the A button for 5 seconds to reset. If the environmental pollution is serious, the filter needs to be replaced in advance. The filter can be obtained from the designated dealer.
2. After the product is powered off. unscrew the filter cover according to the switch direction of the base filter cover. take out the filter screen that has expired, and put it in the corresponding trash

Troubleshooting

be restored.
Is the circuit breaker turned on at the place of use?| Please wait for the power to recover.
Is the adapter connection normal?| Make sure that the adapter plug is properly connected to the socket
Make sure that the adapter plug is properly connected to the socket
There is no wind at the air outlet, and
the air volume is significantly weaker
than when it was first purchased| Is the air inlet covered?| Please remove the covering.
Is there any residual dirt on the air inlet?| Please clean the air inlet.
Is the filter covered?| Please unpack the plastic bag
Does the filter have residual dirt?| Please clean the filter.If there is no obvious improvement, replace the filter.
Compared with the time of purchase,
the air volume at the air outlet is greatly increased| Is the filter installed correctly?| Please install the filter correctly.
Is the filter damaged?| Please replace it with a new one.
After the product has been running
for a period of time, the air quality has
not improved significantly.| Is the filter installed correctly?| Please install the filter correctly.
Is the filter damaged?| Please replace it with a new one
Does the filter have residual dirt?| Please clean the filter If there is no obvious
improvement, replace the filter.
The running noise of the product is
too loud.| Dust remains on the air inlet and outlet of the
PM2.5 sensor.| Please clean the air inlet and outlet of the PM2.5 sensor.
Is the air inlet covered?| Please remove the covering.
Are there any foreign objec:9lease left in the air outlet?| clean the air outlet

After – sales Service

Product Warranty Card (Saved by the user)

Model:

Warranty Period :DD/MM/VY
Purchaser| Name
Address
Phone
Shop| Name
Address
Phone

After sales service description:

1. Warranty terms
   a) Since the date of purchase, the warranty period is 1 year, and the warranty period is free (except for force majeure, except for man- made causes) ;
   b) The gifts that come with the purchase are not covered by the warranty ;
   c) Proofs: purchase records, purchase vouchers issued by the company, and invoices are all available

2. Parts
   During the warranty period, the accessories are provided free of charge ; After the Warranty , the accessories are charged at the market price. The filter is a consumable, unless the filter is damaged, it will not be included in the scope of warranty parts.

After-sales Service Right.

1. According to the national “Three Guarantees” regulations;
2. This machine enjoys the lifetime maintenance service from the company’s after-sales service center;
3. The following situations are not within the scope of the “Three Guarantees”:
   a. Machine damage caused by human factors ;
   b. Damage caused by unauthorized disassembly or repair by non-authorized personnel of the company
   c. Normal wear and tear during use
   d. Filter (except for the filter material and the defect of the product itself)
   e. Damage caused by failure to install and use properly in accordance with the operation manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>