YUANJ MD-602 Portable CD Player User Manual
- June 5, 2024
- YUANJ
Table of Contents
YUANJ MD-602 Portable CD Player
IMPORTANT SAFETY instructions
Please read this manual carefully before using this player and keep it for later reference.
Warning:
The player
To reduce the risk of fire or avoid the damage to the human body, please
follow the instructions below:
- Never touch the lens of the device. Always keep the disC compartment closed to prevent dust from collecting on the lens.
- It the device is unable to scan discs properly, use a standard commercially available cleaner to clean the laser opticS. Other cleaning methods may damage the laser optics.
- Clean the device with a clean, damp leather cloth. Do not use any cleaning agents.
- If the player fails to work, please contact our after-sales staff in time, professional technical support staff will provide you with detailed answers.
- The player can not be used or stored in a moist environment, please keep the player away from any liquid, steam or vapor, such as raindrops, mist etC.
- Please do not place any liquid or metal gadgets onto the player, such as pin or a cup of coffee.
- Please do not expose the player to the sunlight and keep it away from fire heater. The player can not be placed in a high-temperature environment.
- All professionals with extensive electronic knowledge and maintenance experience are allowed to disassemble the player for maintenance. The replacement of spare parts must be done in strict accordance with the parameters of the Circuit design.
- Please do not stick or hit the player with sharp objects.
- There are light-emitting diodes in this player, staring directly with eyes should be avoided to prevent visual impairment from being caused.
- Children under 12 years is not allowed to use the player individually.
- When charging, ensure that the Power source and the Charging voltage are DC 5V/1A.
Excessive voltage input may cause machine overload damage.
Battery
If the player you purchased contains batteries, please do not disassemble the
player or charge the player with other adapters that do not meet the
electrical parameters of this product to avoid Circuit failure. For your
safety, please treat the built-in high-capacity polymer lithium battery by
following the instructions below:
- Please do not remove the battery pack.
- Please do not beat or impact this piaye
- Please do not make the battery short cirCuit or pierce it.
- Please do not place the player under high temperature which is above 140 F (60 C).
- Please do not put the battery in a fire.
- If the battery has been damaged, please ask a professional to replace the battery with the same specification, or contact our after-sales support for help
Hearing protection
Listen at medium volume:
Please adjust the volume to an appropriate level. If the volume is too high,
it may damage your hearing or even cause permanent damage.
Set the volume to a low level:
Increasing the volume slowly, until a comfortable, clear sound can be heard.
Listen to the audio within a reasonable time frame:
Long time listening, even at a reasonable volume may cause damage to your
hearing. Please use the product properly and get a rest when necessary.
Environmental protection
To protect the environment and human health, please follow local laws and regulations on the abandonment of the package, electronic product or battery. Please do not put the product together with household waste.
PACKAGING & PRODUCT
What’s in the box
The CD player
TROUBLESHOOTING
USER GUIDE
How to insert a disC
Push the OPEN button to the right to open the door. Insert your index finger
into the center hole of the disc and take the edge of the disc with your
thumb. Keep the side with words upward while inserting the disc into CD
player, press the disc gently to make it steady, and make sure if the disc has
been in place.
Close the disc door gently and completely, otherwise, the player will not read
the disC.
Keep pressing ” for 2 seconds to switch to the TF card
( Note: The player is only compatible with CD, CDR, MP3, HDCD formats.)
Insert an earphone
Only earphone with 3.5mm plug is compatible with this player.
Note: Only ” Q1′ supports headset control
How to turn on the player
The power switch is located on the side. Please toggle it to ON position to
play normally. When a disc is played to the end or there is no disc, the
player will enter a standby mode after 20 seconds. Please press the PLAY
button again to restart the player.
How to turn off the player
There are two ways to turn off the player:
- Please toggle the power switch to OFF position if the player will no longer be used for a long time;
- The player will enter a standby mode by pressing the SIOP button twice in succession, but at this time, the power of the player is not completely disconnected.
Note: Please turn the power switch to OFF position if the player will no longer be used for a long time.
How to charge for the player
How to choose a charger: This product is only equipped with one charging
cable. You can choose any charger that supports USB2.0 protocol or standard
UsB charger of a cellphone running in Android or i0S system to charge for the
player.
Charging time: It will take around 4 hours to fully charge the player
according to the standard USB2.0 protocol.When the battery is being charged,
the LED indicator is red. Once the player is fully charged, the LED indicator
will turn green.
PLAY
How to set up the circle mode
Each time the MODE button is pressed, the order of the tracks played will be
as follows: Repeat 1(1),
Repeat all (ALL), random play (RAND), preview play (INTRO) (only 10 seconds
per track will be played in this mode).
How to program the play
Press the stop button firstly press the PROG/FM button to enter the
programming mode when the play stops, press the PREVIOUS or NEXT button to
select the track you want to program, press PROG again to confirm the
programming.
Up to 30 tracks can be programmed in this mode. After that, press the PLAY
button to enter the programming play mode. PresS the STOP button directly to
enter the stop mode to cancel or reprogram.
How to setup sound
How to adjust volume: The volume knob is located on the side of the player.
Rotate it to the left or right to decrease or increase the volume. Please
listen to music at an appropriate volume to protect your ears.
How to setup EQ effect
Press the EQ button to changes the different sound effects. There are a total
of 5 sound effects: BBS, POP, JAZZ, ROCK, and CLASSIC.
How to connect Bluetooth devices
- Turn on your Bluetooth headphone/speaker and make sure that the Bluetooth is turned on.
- Press the Bluetooth buton of the player. f the Bluetooth is off, you need to press the play button to turm on the Bluetooth.
- Select ” BT Search option, then press the PLAY button, the cd player will start searching nearby Bluetooth devices.
- Press the PLAY button to select the name of your device that needs to connect to.
- After paired successfully. press the BLUETOOTH butón to return to the play interface.
OTHER FEATURES
Time setting of screen sleep
The screen will be turned off after 10 second of inactivity. The screen will
be turned on when any button IS pressed.
Key lock
After playback mode and sound effects have been setup, you can toggle the
power switch to the HOLD position in order to prevent the environment, for
example naughty children or crowded occasions from affecting the setting of
player.
Connect to AUX devices
In order to use this player in different occasions, an extra AUX cable has
been supplied to connect this player to any device with AUX interface
conveniently, such as: home theater, music center, Bluetooth speakers,
vehicles, headphone amplifiers, and more.
How to use FM transmitter
please follow the below steps to use FM transmitter to connect the car radio
device
-
When playing CD discs, press play/pause >I) button firstly press PROG/FM button, FM transmitter frequency Will show up on the display. PresS it again, the frequency will change. Choose one frequency you prefer.
Six FM transmitter frequency are optional 78.1, 79.3, 87.5, 88.5, 93.6, 103, 107.1, OF -
Turn on the car radio device and adjust the frequency to the same frequency you choose on CD player.
-
You can listen the CD by the car audio device now.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>