soundcore Flare 2 Bluetooth Speaker User Manual

soundcore Flare 2 Bluetooth Speaker

At a Glance

1. Light mode button
2. Power button
3. Volume buttons ( – / +) 7 USB-C charging port
4. Multi-function button
5. Bass Boost button
6. Bluetooth & PartyCast button

Charging

• **** Use the included USB cable to charge your speaker and make sure it is fully charged before the first use.
• Do not charge your speaker for extended periods.
• When not in use, store your speaker in a cool place.

Powering On/Off

Bluetooth Pairing

| Press| Enter Bluetooth pairing mode
---|---|---
| Flashing blue| Bluetooth pairing
| Steady blue| Bluetooth connected

• When powered on, the speaker will automatically connect to the last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter the Bluetooth pairing mode.
• To pair with another device, press the Bluetooth button to re-enter the pairing mode.

PartyCast Mode

Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare 2 speakers to control audio and all the light modes. Set up the primary speaker:

1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When successfully connected, the Bluetooth LED will turn blue.

2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and the Bluetooth LED flashes white to indicate this Flare 2 is the primary speaker.

   • The Bluetooth LED on the primary speaker will keep flashing white.

Connect with secondary speakers:

1. Make sure the secondary speakers aren’t connected to any Bluetooth devices.

   • Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth LED will flash blue.

2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED flashes white to indicate the secondary speaker is in connection mode.
   

3. When successfully connected, the Bluetooth LED on the primary speaker will continue flashing white, while on the secondary speakers will turn white.

When PartyCast mode is successfully entered:

• You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only;
• You can power off or switch light modes for each secondary speaker individually;
• You can’t adjust the volume for each secondary speaker individually;
• To exit the PartyCast mode, press the Bluetooth button on either speaker for 3 seconds until the Bluetooth LED flashes blue.

Button Controls

Play/Pause| | Press
Next track| | Press twice
Previous track| | Press thrice
Bass Boost on/off| | Press
Volume up/down| | Press
Answer/End a call| | Press
Reject a call| | Press and hold for 2 seconds
Activate Siri or other voice assistant software| | Press and hold for 2 seconds

Light Modes

 Download the Soundcore App to check all available light modes.

Soundcore App

Download the Soundcore App for light modes, EQ settings, firmware updates and more.

Specifications

Specifications are subject to change without notice.

References

• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• Anker (アンカー) Japan 公式オンラインストア – Anker Japan 公式オンラインストア
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US
• FCC OET Authorization Search

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>