SENZER W800 Wireless Headset User Manual

SENZER W800 Wireless Headset

Product Introduction

1. Power Indicator
2. Power Button
3. Mode Button
4. Type-C Charging Port
5. Microphone Indicator
6. Microphone Mute
7. Audio Control
8. 3.5mm Audio Jack

Function of Buttons

Con t rol B u tton| Function| H ow- t o-Do| lnd i ca t or N o i ce P r o m pt
---|---|---|---
Power Button| Power On| Press for 3 Seconds| Power Indicator Blue Flickers
Power Off| Press for 3 Seconds| Power Indicator Red Flickers & Off
Restore Factory Setting| Press for 15 Seconds| Power Indicator Red Flickers
Mode Button| Switch Bluetooth Mode| Twice Click| Before Connecting: Power Indicator Blue & Red Flicker

After Connecting: Power Indicator Stays Blue

Switch USB Dongle Mode| Twice Click| Before Connecting: Power Indicator Green & Red Flicker

After Connecting: Power Indicator Stays Green

Wipe Off & Reset Connection| Press for 5 Seconds| Power Indicator Whi| the Flickers 3 Times

Audio Control

| Volume Up/Down| Push Upward/Down| When Volume is at Max./Min. Level| , It Tinks As a Reminder
Previous/Next Track| Push Upward/Down for 1.5 Seconds| /
Pause/Play| One Click| /
Microphone Mute Button| Mic Mute/Mic On| One Click| Mic On: Mic Indicator Stays Red

Mic Mute: Mic Indicator Off

Reject Phone Call| Press for 1.5 Seconds| /
Answer/End Phone Call| Twice Click| /
3.5mm Audio Jack| Wired Mode| Connect the 3.5mm Audio Cable

(Included in Package)

| Headset Power Off into Wired Mode, and All Buttons Become

Disabled

USB Dongle Receiver| Re-connecting/Pair N ew Dongle| Find An Ejection Pin, Insert it into the Side Hole| Dongle Indicator Green Flickers
After connecting| Headset Switch to USB Dongle Mode| The dongle Indicator Stays Green
Type-C Charging Port| Charge Headset| Connect the Charging Cable (Included in Package)| Being Charged: Power Indicator Stays Red Fully Charged: Power Indicator Stays Blue

After wiping off & resetting the connection, how to pair the connection again?

1. Bluetooth Connection: The product switches to Bluetooth mode, waiting for the pair – open the Bluetooth on your device, find the Bluetooth name “X100” – pair.
2. USB Dongle Mode: Product switches to USB Dongle Mode – USB dongle connected to PC/device – Find an ejection pin, insert into the side hole – pair.

Notes:

1. When a headset is at a low battery level, there is a voice prompt, and the power indicator red flickers; if the battery dies, the headset powers off automatically.
2. Please charge the headset when the battery is low.
3. After powering on, if there is no connection for 5 minutes, the headset powers off automatically to save battery consumption.
4. While the headset is being charged, it powers off automatically, and is not able to power on; users can use wired mode though.

How to Setup With Devices

PC, Laptops, Macbook Pro/Air (USB Dongle Mode)

1. Connect the USB transmitter to a side USB port on laptop computers.
2. Hold the Power button to turn on the headset.
3. Fix the settings: system settings- sound settings- choose X100 as audio output- choose X100 as microphone input (recording device).

PS4/PS5 (USB Dongle Mode)

1. Connect the USB transmitter to the USB port on the PS4/PS5 console.
2. Hold the Power button to turn on the headset.
3. Fix PS4/PS5 console settings: main menu- settings- devices- audio devices- set input device to X100- set output device to X100- set output to headphones to all audio set volume control to 100%.

Nintendo Switch, Mobile Phones, iPad and other Mobile Devices (Bluetooth Mode)

1. Twice click the “Mode” button to switch to “Bluetooth” mode.
2. Open Bluetooth on your device, search, and find the name X100″.
3. Pair & Connect.

Xbox One, Xbox Series S/X; and other mobile devices (Wired Mode)

1. Connect the audio cable to the 3.5mm audio jack on a headset, and the other end of the audio cable to the phone jack of the Xbox One controller.
2. Fix the settings on Xbox One: select settings on the menu page, “yes”- display and sound, “yes”- chat console, “yes”- no change, “yes”.

Notes: when the headset is in wired mode, the headset powers off automatically, and all control buttons are disabled.

Product Parameters

Customer Service

MANUFACTURER

• Shenzhen Xuli Network Technology Co., Ltd.
• Add: 102, Building 8, Minle Industrial Park, Meiban Ave.,
• Longhua New Dist., Shenzhen, China
• Web: www.senzer.net
• Email: [email protected]
• Facebook: www.facebook.com/senzer.official
• 6-Month Warranty Services
• Lifetime Technical Support

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>