effilex IP69K Waterproof High Power LED Bar User Manual
- June 5, 2024
- effilex
Table of Contents
effilex IP69K Waterproof High Power LED Bar
User security
- IP69K Classification: protected against high-pressure and high-temperature cleaning from any direction
- Do not try to open the product. Any opening of the product can result in a sealing failure
- Operating environment: 0 to 40°C – Humidity: 20 to 85RH% (without condensation)
- High humidity and high temperature could damage the device
- Do never try to fix any damages to the product by yourself
- Make sure you are using a correct power supply before connecting the device
- The device must be powered by a 24V safety power supply in accordance to local Electrical Safety rules
- Do not inverse electrical polarity – check the conventions before turning on the power supply
- Make sure you consider an adapted connector to link the device to the power supply
Any improper use voids the warranty
Reference
EFFI-FLEX-IP69K| -WW| -XXX| -YY| -ZZ| -V|
-AA| -…
---|---|---|---|---|---|---|---
| | | | | | |
Number
of LED
| Wavelength
(nm)
| Window| Lens position| Vent| Cable
Length
| Option|
5| 405| TR (Transparent)| P0 (no lens – 75°)| V
(vent)| L5 (5m)| LS (linescan)|
10| 465| SD (Semi-diffusive)| P1 ( 45°)| Ø (no vent)|
L10 (10m)| POL (polarizer)|
…| 525| OP (Opaline)| P2 ( 25°)| | |
ELS-(IN)-350-UUU|
Every 5| 625| | P3 ( 10°)| | | (UUU=DIM max)|
to 145| 850| | | | | |
| 000 (White)| | | | | |
EFFI-FLEX-IP69K-FOOD (1)| -WW| -XXX| -YY| -ZZ|
-V| -AA| -…
---|---|---|---|---|---|---|---
| | | | | | |
Number
of LED
| Wavelength
(nm)
| Window| Lens position| Vent| Cable
Length
| Option|
5| 405| TR (Transparent)| P0 (no lens – 75°)| V
(vent)| L5 (5m)| LS (linescan)|
10| 465| SD (Semi-diffusive)| P1 ( 45°)| Ø (no vent)|
L10 (10m)| POL (polarizer)|
…| 525| OP (Opaline)| P2 ( 25°)| | |
ELS-(IN)-350-UUU|
Every 5| 625| | P3 ( 10°)| | | (UUU=DIM max)|
to 145| 850| | | | | |
| 000 (White)| | | | | |
Maintenance
Regardless of maintenance, the product must be switched off. To remove marks on the window, apply just one or two drops of alcohol-free lens cleaning fluid in a gentle circular motion with a cleaning tissue. Always apply the fluid to a tissue rather than the window itself.
Electronical consideration
The EFFI-FLEX-IP69K is supplied with a 24V constant voltage. The TRIG (or AIC) contact needs to be connected. Please make sure that the flying leads output of the cable is in a sealed area.
Standard version cable: Weather, bio oil, detergent and hot water resistant
cable. Core insulation made of modified PP / Outer sheath made of special TPE / Sheath colour: black
Conductor N°| EFFI-FLEX-IP69K
1
(Brown(2))
| Flying Leads (standard version)
OR
M12 – 5 pins
(-FOOD version)
| +24V
2
(White(2))
| N/A
3
(Blue(2))
| GND
4
(Black(2))
| PNP TRIGGER (1) for Auto-strobe
Light ON if VPNP > 5V DC Max 24V DC – Analog Voltage
5
(Green/Yellow(2))
|
N/A
- Or AIC : Analog Intensity Control for Dimming Control
- Color of the cable fo the -FOOD version
Power supply for
EFFI-FLEX-IP69K (for 2m cable)
Amount of LED (N)| Standard
version
| ELS 350mA
P Peak_2s| P CW
5| 20| 10| 10
10| 40| 15| 15
15| 60| 20| 20
20| 80| 30| 30
50| 190| 65| 65
100| 380| 130| 130
150| 570| 195| 195
- ELS-350-5V : Output intensity rising between 1.5 and 5V
- ELS-IN-350-5V : Output intensity decreasing between 0 and 5V
- ELS-350-10V : Output intensity rising between 5 and 10V
- ELS-IN-350-10V : Output intensity decreasing between 0 and 10V
Mechanical consideration
Optical Length | Lop = [20 x N] if N LED |
---|---|
Optical Length (for L2 Version) | Lop = [40 x N] if N LED |
Mechanical Length | Lmecha = Lop + 49mm |
To avoid water retention, stainless steel screws have to fill in the gaps (x8)
Documents / Resources
|
effilex IP69K Waterproof High Power LED
Bar
[pdf] User Manual
IP69K, Waterproof High Power LED Bar, IP69K Waterproof High Power LED Bar,
High Power LED Bar, Power LED Bar
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>