IK Multimedia Iklip Grip Pro Multifunction Smartphone Camera Stand User Manual
- June 10, 2024
- IK Multimedia
Table of Contents
IK Multimedia Iklip Grip Pro Multifunction Smartphone Camera Stand
Multifunction smartphone camera stand
The iKlip Grip Pro is a multifunction smartphone camera stand that can be used as a hand-held device, tripod, or selfie stick. It also comes with a Bluetooth shutter controller for capturing video and photos remotely.
Contents
The user manual contains the following sections:
- Table of Contents
- iKlip Grip Pro
- Register your iKlip Grip Pro
- Using iKlip Grip Pro as hand-held
- Using iKlip Grip Pro as tripod
- Using iKlip Grip Pro as selfie stick
- Using the Bluetooth shutter
- Compatible Devices
- Specifications
- Warranty
- Support and more info
Register your iKlip Grip Pro
To register your iKlip Grip Pro, visit www.ikmultimedia.com/registration. By registering, you can access technical support, activate your warranty, and receive Jam Points TM which can be used to obtain discounts on future IK purchases.
Using iKlip Grip Pro as hand-held
- Mount the Xpand holder on the threaded ball at the top of the pole. Alternatively, you can mount any camera with a standard 1/4-20 female thread.
- Fit your preferred smartphone and orientate it by operating the side key.
Using iKlip Grip Pro as tripod
WARNING: Before trying to open iKlip Grip’s legs, you need to unlock the telescopic pole.
- Unlock the telescopic pole by turning it counter-clockwise.
- Extend the pole and open the legs.
- Place iKlip Grip Pro on a stable surface and place the pole at the height desired. Then lock the pole by rotating it clockwise.
Using iKlip Grip Pro as selfie stick
- Unlock the telescopic pole by turning it counter-clockwise.
- Extend the pole to its full length and lock it by turning clockwise.
Using the Bluetooth shutter
- Turn on the shutter by switching the ON/OFF button on the side of the controller. The shutter controller will enter into pairing mode, and the LED indicator starts flashing quickly at the same time.
- Activate the Bluetooth setting on your device and look for new Bluetooth devices.
- Select the Shutter device from the list and start capturing video and photos using your new shutter controller.
Compatible Devices
The iKlip Grip Pro is compatible with smartphones and devices with screens ranging in size from 3.5 to 6 inches, including:
- iPhone 6 Plus/6/5s/5c/5, iPhone 4s/4, iPad 4/3/2, all iPad, iPod touch 4th gen. Or newer
- Built-in camera app
- Camera360 app
- Samsung Galaxy S2/S3/S4+, Note 1, Note 2, Note 3+, Tab 2, Note 8, 10.1+, Moto X/Nexus 4,5,7+ / Xiaomi 1S,2S,3+
- Sony Xperia S, HTC New One and X+, Other Android phones
Specifications
- Pole length: 45cm
- Maximum weight applicable: 1kg
- Holds any smartphones with screens ranging in size from 3.5 to 6 with case on
- Holding Bracket Width: 54mm (min) – 91mm (max) / 2.13 (min) – 3.58 (max)
- Material: Thermoplastic
Warranty
Please visit www.ikmultimedia.com/warranty for the complete warranty policy.
Support and more info
For support and more information, visit www.ikmultimedia.com/support or www.iklipgrippro.com.
Regulatory
Model: iKlip Grip Pro
Model Number: IK000084
Bluetooth Shutter Model Number: 084-104-1-01 (Contains part
SFR1002)
iKlip Grip Pro
Thank you for purchasing iKlip Grip Pro.
Your package contains:
- iKlip Grip Pro
- Wrist hand strap
- Device holder
- Bluetooth shutter
- Double thread adapter
- Quick Start Guide
- Registration Card
iKlip Grip Pro is the next generation of IK’s well known iKlip Grip. It provides a handheld grip, mini-tripod, monopad, tripod adapter and bluetooth shutter for any smartphone or phablet, in a conveniently portable package. iKlip Grip Pro features a smartphone holder with brackets that expand to securely hold devices with or without a case with screen sizes ranging from 3.5” to 6”. Designed for effortless stable video recording, iKlip Grip Pro’s holder is supported by a handle with three folding legs that can be used as either a tabletop tripod or handheld grip. There is also custom designed removable bluetooth shutter button confidently integrated on the handle, to easily take pictures and start/stop video. With iKlip Grip Pro, videographers will always get a great angle thanks to its ball mount, which can be adjusted up to 90°, and its detachable anodized aluminum telescoping pole, which can be locked into place to give up to 60cm of additional height. iKlip Grip Pro’s handle can also be used as a camera tripod or as a tabletop micprhone stand or handheld mini boom thanks to its standard 1/4” thread mount. Likewise, its smartphone holder can also be detached for use with tripods and other stands.
Register your iKlip Grip Pro
By registering, you can access technical support, activate your warranty and
receive free Jam Points™ which will be added to your account. JamPoints™ allow
you to obtain discounts on future IK purchases! Registering also keeps you
informed of all the latest software updates and IK products.
Register at: www.ikmultimedia.com/registration
Using iKlip Grip Pro as hand-held
-
Mount the Expand holder on the threaded ball at the top of the pole. Alternatively you can mount any camera with standard 1/4”-20 feme thread.
-
Fit your preferred smartphone and orientate it by operating the side key.
Using iKlip Grip Pro as tripod
WARNING : before to try to open iKlip Grip’s legs, you NEED to unlock the telescopic pole.
-
Unlock the telescopic pole by turning it counter-clockwise.
-
Extend the pole and open the legs.
-
Place iKlip Grip Pro on a stable surface and place the pole at the height desired. The lock the pole by rotating it clockwise.
Using iKlip Grip Pro as selfie stick
-
Unlock the telescopic pole by turning it counter-clockwise.
-
Extend the pole full length and lock it by turning clockwise.
Using the Bluetooth shutter
-
Turn on the shutter by switching the ON/OFF button on the side of the controller. The shutter controller will enter into pairing mode and the LED indicator starts flashing quickly at the same time.
-
Activate the Bluetooth setting on your device and it should “look” for new Bluetooth devices.
-
Select the “Shutter” device from the list and you should be ready to start capturing video and photos using your new shutter controller.
-
You can fix the shutter on the body of iKlip Grip Pro thanks to its sledge.
Compatible Devices
| Lista de | App de | App Camera360 |
|---|
iPhone 6 Plus/6/5s/5c/5, iPhone 4s/4, iPad 4/3/2, all iPad, iPod touch 4
th gen. Or newer| |
Samsung Galaxy S2/S3/S4+, Note 1, Note 2, Note 3+, Tab 2,
Note 8, 10.1+, Moto X/Nexus 4,5,7+ / Xiaomi 1S,2S,3+
| |
Sony Xperia S, HTC New One and X+, Other Android phones| NO
COMPATIBLE|
Specifications
Pole length: 45cm
Maximum weight applicable: 1kg
Holds any smartphones with screens ranging in size from 3.5” to 6” with case
on Holding Bracket Width: 54mm (min) – 91mm (max) / 2.13” (min) – 3.58” (max)
Material: Thermoplastic
Warranty
Please visit:
www.ikmultimedia.com/warranty for the
complete warranty policy. Support and more info
www.ikmultimedia.com/support
www.iklipgrippro.com
Regulatory
Model: iKlip Grip Pro
Model Number: IK000084
Bluetooth Shutter Model Number: 084-104-1-01 (Contains part SFR1002)
U.S.A.
Contains Bluetooth shutter with FCC ID : 2ADMCSF2001
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
**EUROPE
**
AUSTRALIA/NEW ZEALAND
BRAZIL
Modelo: Remote Shutter
04464-15-05139
Technical Specifications
Operation Frequency
Bluetooth Version
Modulation
UNITED ARAB EMIRATES
TRA
REGISTERED N°: ER48399/16
DEALER N°: DA45962/15
TAIWAN
FCC radiation exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
CANADA
Contains/Contient Bluetooth shutter with IC ID: 20638-SFR1002
IC statement/warning
This device complies with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
To comply with Industry Canada RF radiation exposure limits for general population, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20cm is maintained between the radiator (antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SINGAPORE
Complies withed StandardsDA00006A
**JAPAN
**
CHINA
CMIIT ID: 2015DP5291
KOREA
Documents / Resources
| IK
Multimedia Iklip Grip Pro Multifunction Smartphone Camera
Stand
[pdf] User Manual
Iklip Grip Pro Multifunction Smartphone Camera Stand, Iklip Grip Pro,
Multifunction Smartphone Camera Stand, Smartphone Camera Stand, Camera Stand
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>