PASCO PS-2600A Wireless Spectrometer Fiber Optic Cable Instruction Manual

: September 28, 2024
: PASCO

Table of Contents

PS-2600A Wireless Spectrometer Fiber Optic Cable
Specifications
Product Information
Components
Features
Get the software
Product Usage Instructions
Software Help
FAQ
Q: Can I use the Fiber Optic Cable with other
Q: How do I clean the Fiber Optic Cable?

PS-2600A Wireless Spectrometer Fiber Optic Cable

“`html

Specifications

Product Name: Fiber Optic Cable PS-2601
Transmission Loss: 0.1 to 1.0 decibels per meter (dB/m)

Product Information

The PASCO Fiber Optic Cable PS-2601 is designed for use with the
Wireless Spectrometer (PS-2600A) in spectrometry experiments. It
allows for examining the spectra of various light sources and
measuring light intensity.

Components

Fiber optic window
Fiber optic housing
Cable body
Cuvette-shaped base
Probe orientation arrows

Features

The cuvette-shaped base of the Fiber Optic Cable has arrows on
its label to ensure correct orientation when inserting into the
Wireless Spectrometer.

Get the software

To use the Wireless Spectrometer, you need PASCO’s Spectrometry
software available for Mac, PC, iOS, and Bluetooth-compatible
Android devices.

Product Usage Instructions

Turn on the Wireless Spectrometer and connect it to
Spectrometry software.
If using the Fiber Optic Cable for the first time, remove the
protective film from the probe’s base.
Insert the base into the cuvette opening on the Wireless
Spectrometer with arrows pointing towards the sensing element.
In the software, navigate to the Analyze Light page.
Begin data collection and point the fiber optic housing at the
light source to collect and display measured light data.

IMPORTANT: Avoid pulling on the cable to remove
it from the Wireless Spectrometer to prevent damage to the
connection.

Note: Use a transparent glass plate between the
fiber optic housing and high-heat light sources to prevent damage
due to excessive heat.

Software Help

Access Spectrometry Help within the software or online for
assistance on using the product with the software.

FAQ

Q: Can I use the Fiber Optic Cable with other

spectrometers?

A: The Fiber Optic Cable is specifically designed for use with
the PASCO Wireless Spectrometer (PS-2600A) and may not be
compatible with other spectrometers.

Q: How do I clean the Fiber Optic Cable?

A: Use a soft, lint-free cloth to gently wipe the fiber optic
window and housing. Avoid using any abrasive materials or harsh
chemicals.

“`

Product Manual | 012-14335C

Fiber Optic Cable

PS-2601

Introduction
The PASCO Fiber Optic Cable is designed to be used with the Wireless Spectrometer (PS-2600A) in introductory spectrometry experiments. The cable’s probe makes it possible to examine the spectra of various light sources. The Fiber Optic Cable and Wireless Spectrometer can also be used to measure light intensity.

Usage
The Fiber Optic Cable’s cuvette-shaped base features arrows on its label. When inserting the base into the cuvette opening on the Wireless Spectrometer, orient the base so that the probe orientation arrows point towards the sensing element, as represented in Figure 1.

IMPORTANT: To remove the Fiber Optic Cable probe from the Wireless Spectrometer’s cuvette opening, grasp the sturdy cuvette-shaped base and pull upwards. Do NOT pull on the cable, as doing so may damage the connection between the cable and the base.

Components
Included equipment: · Fiber Optic Cable
Required equipment: · Wireless Spectrometer (PS-2600A) · Spectrometry software
Features
1 Fiber optic window 2 Fiber optic housing 3 Cable body 4 Cuvette-shaped base 5 Probe orientation arrows
Get the software
Using the Wireless Spectrometer requires the use of PASCO’s Spectrometry software. Spectrometry is available for free for Mac, PC, iOS, and Bluetooth- compatible Android devices at www.pasco.com/ products/software/spectrometry. The software is also available from the Apple App Store and from Google Play.

Figure 1: Correct orientation of arrows on cuvette-shaped base.
To make measurements using the Wireless Spectrometer and Fiber Optic Cable:
1. Turn on your Wireless Spectrometer and connect it to Spectrometry. For detailed instructions on this, see the manual for the Wireless Spectrometer and the Spectrometry online help.
2. If this is your first time using the Fiber Optic Cable, remove the protective film from the probe’s cuvette-shaped base.
3. Insert the base into the cuvette opening on the Wireless Spectrometer. Make sure the probe is oriented so that the arrows on the base face towards the sensing element, as shown above in Figure 1.
4. In the software, navigate to the Analyze Light page.
5. Begin data collection, then point the fiber optic housing at the light source so that light from the source shines into the fiber optic window. The program will automatically begin receiving and displaying data regarding the measured light.
IMPORTANT: Excessive heat may cause damage to the fiber optic housing’s internal components. If the light source you are studying produces significant amounts of heat, such as from a flame test, place a transparent glass plate between the source and the fiber optic housing.
Software help
The Spectrometry Help provides information on how to use this product with the software. You can access the help from within the software or online.
Software: Info and Settings > Help
Online: help.pasco.com/spectrometry

1

Fiber Optic Cable | PS-2601
Transmission loss specifications
Figure 2 shows a graph of transmission loss versus frequency for the Fiber Optic Cable. The graph demonstrates that the transmission loss over the visible spectrum is relatively low, in the range of 0.1 to 1.0 decibels per meter (dB/m).
Figure 2: Typical Fiber Optic Cable transmission loss versus wavelength.

Specifications and accessories
Visit the product page at pasco.com/product/PS-2601 to view the specifications and explore accessories. You can also download experiment files and support documents from the product page.
Experiment files
Download one of several student-ready activities from the PASCO Experiment Library. Experiments include editable student handouts and teacher notes. Visit pasco.com/freelabs/PS-2601.
Technical support
Need more help? Our knowledgeable and friendly Technical Support staff is ready to answer your questions or walk you through any issues.

Chat Phone
Email

pasco.com
1-800-772-8700 x1004 (USA) +1 916 462 8384 (outside USA)
support@pasco.com

Limited warranty
For a description of the product warranty, see the Warranty and Returns page at www.pasco.com/legal.
Copyright
This document is copyrighted with all rights reserved. Permission is granted to nonprofit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks
PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in the United States and in other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of, their respective owners. For more information visit www.pasco.com/legal.

2