EHEIM compactON 2100 Aquarium Pump Instruction Manual

EHEIM compactON 2100 Aquarium Pump

General user instructions

Information on using the operating manual

•  Before using the appliance for the first time, the operating manual must be read fully and understood.
•  Consider the operating manual as part of the product and keep in a safe and accessible location.
•  Enclose this operating manual if passing the appliance on to a third party.

Symbol explanation

Typographical conventions

• Reference to a figure, in this case, reference to figure A
• You are prompted for an action.

Application
The appliance and all parts included in the scope of delivery are intended for private use and must only be used:

•  for aquarium-related purposes
•  indoors
•  in compliance with the technical data

The following limitations apply to the appliance:

•  do not use for commercial or industrial purposes
•  do not pump caustic, inflammable, aggressive or explosive substances, food or drinking water
•  the water temperature may not exceed 35°C
•  never operate without a water flow

Components

Use

IMPORTANT SAFETY INSTRUCTIONS

To guard against injury, basic safety precautions should be observed, including the following.

•  FOR HOUSEHOLD USE ONLY
•  WARNING! RISK OF ELECTRIC SHOCK!
•  This pump has not been investigated for use in swimming pool areas!
•  DO NOT RUN DRY!
•  DANGER. To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For each of the following situations, do not attempt repairs by yourself; return the appliance to an authorized service facility for service or discard the appliance.
•  If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source.
•  Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet.
•  Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any manner.
•  To avoid the possibility of the appliance plug or receptacle getting wet, position the aquarium stand and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop”, shown in the figure, should be arranged by the user for eachcord connecting the aquarium appliance to a receptacle. The “drip loop” is that part of the cord below the level of the receptacle, to prevent water traveling along the cord and coming in contact with the receptacle. If the plug or receptacle does get wet, DON’T unplug the cord; disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.
•  Close supervision is necessary when any appliance is used by or near children.
•  To avoid injury, do not contact moving parts.
•  Always unplug an appliance from an outlet when not in use, before putting or taking off parts, and before cleaning. Never yank the cord to pull plug from outlet. Grasp the plug and pull to disconnect.
•  Do not use an appliance for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition.
•  Do not install or store the appliance where it will be exposed to the weather or to temperatures below freezing.
•  Make sure an appliance mounted on a tank is securely installed before operating it.
•  Read and observe all the important notices on the appliance and its cord.
•  If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less amperes or watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
•  Check that the voltage shown on the label of the unit corresponds to the voltage of the mains supply.
•  Disconnect all electrical appliances from the mains before placing hands in the water.
•  The line cord of this unit cannot be replaced or repaired. Should the line cord become damaged the appliance must be discarded.

KEEP THESE INSTRUCTIONS FOR FUTURE

Safety instructions
Risks for persons and property can arise from this appliance if the appliance is improperly used or not used as intended or if the safety instructions are not heeded.

For your safety

•  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are under the supervision of someone responsible for their safety or have received instruction on usage of the appliance from said person. Children should be supervised to ensure that they do not play with the appliance.
•  Only for European markets: This appliance can be used by children from the age of 8 and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised and have been instructed in the safe use of the appliance and have understood the resulting dangers. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children unless they are supervised.
•  Before use, carry out a visual inspection to ensure that the appliance, especially the mains cable and plug, are undamaged.
•  Repairs must only be carried out by an EHEIM service centre.
•  The main cable of this appliance cannot be replaced. If the cable is damaged, the appliance must be scrapped.
•  Only carry out the work described in these instructions.
•  Only use original spare parts and accessories for the appliance.
•  The appliance should be protected by a residual current protection device with a maximum rated residual current of 30 mA. Please contact an electrician if there are any questions or problems.
•  In the event of water leakage or when the residual current protection device is triggered, immediately disconnect all devices in the aquarium from the power supply.
•  If they are not being used, always disconnect all devices in the aquarium from the power supply before you install/remove any parts and before all cleaning and maintenance work.
•  Protect the mains socket and mains plug against moisture and wetness. A drip loop must be formed with the mains cable. This prevents any water running along the cable to the mains socket, which would result in a short-circuit.
•  The electrical data of the appliance must match the data of the power mains. This data is found on the type plate, the packaging and in these instructions.

Commissioning

Connecting the hose

1.  Use a saw to shorten the connecting piece to the diameter of your hose (⌦A).
2.  Screw the connecting piece onto the pump.
3.  Connect your hose to the connecting piece.

Installing suction devices

1. Screw the suction devices into the openings of the body of the engine (⌦B). Hint: Moisten the suction devices with water for easier installation.
Installing the pump cover for external use
The pump can be used inside and outside of the aquarium. Among the benefits of the pump cover c for external use is that it allows the connection of an inlet hose.

1.  Loosen and remove the two lateral fastening screws a (⌦C).
2.  Pull the pump cover b with an integrated power controller out of the engine body from the front.
3.  Push the pump cover c into the engine body (⌦D).
4.  Tighten the pump cover with the locking ring (⌦E).
5.  Make sure that the lugs on the pump cover engage in the recesses in the motor body.
6. Make sure that the impeller is installed complete with the two bearing bushes d (⌦I).
7.  Make sure that the locking ring engages.
8.  Screw the intake nozzle into the pump cover.
9.  Connect your hose to the intake nozzle.
10.  You can re-install the pump cover with an integrated power controller in reverse order.

Operation

CAUTION! Material damage. The pump must not run dry. Switching the pump on/off

1.  Inside the aquarium: Attach the device below water level at the bottom or the inside of your aquarium (⌦F). Pay attention to the maximum pond depth (see Technical data).
   Outside the aquarium: Attach the device to a stable surface outside of your aquarium (⌦G).

2.  Insert the mains plug into the mains socket. Attention: The pump starts immediately!

3.  To turn it off, remove the mains plug from the mains socket.
   Controlling the flow rate

4.  Turn the power controller to adjust the water flow rate (⌦H).

Maintenance

DANGER! Electrocution!

•  All devices must be disconnected from the power supply before any maintenance work is carried out.
  CAUTION! Material damage.

•  Do not use hard objects or aggressive cleaning agents for cleaning.

•  The appliance components are not dishwasher-proof. Do not clean the appliance or appliance parts in the dishwasher.
  The following sections describe maintenance work necessary for optimum and fault-free operation. Regular maintenance prolongs the service life and assures the functionality of the appliance over a long period.

Clearing faults

Decommissioning and disposal

1.  Take the appliance out of the aquarium.
2.  Clean the appliance
3.  Store the appliance in a frost-proof place.

Disposal
When disposing of the appliance, heed the respective statutory regulations. Information on the disposal of electrical and electronic appliances in the European Union: Within the European Union, disposal of electrically operated appliances is governed by national regulations that are based on the EU Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). The appliance may no longer be disposed of with the municipal or household waste. The appliance will be accepted free of charge at municipal collection points or recycling centers. The product packaging is made up of recyclable materials. Dispose of them in an environmentally responsible manner and take them for recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>