INNOELEC Automobile Holder Instruction Manual
- June 3, 2024
- INNOELEC
Table of Contents
Automobile Holder
Installation Instructions
INSTALL
- Turn the knob counterclockwise to release the clip;
- Insert the air conditioner outlet, and then lock the knob clockwise;
- Confirm whether it is loose and whether the installation is complete.
USE
- Place the electronic device parallel to the vacuum suction head and push it firmly against the suction cup.
- Let it stand for 1 second, and wait for the electronic equipment to suck tightly. Release your hand for use.
- For electronic equipment with uneven back or air leakage at the back, Free electrostatic film can be pasted.
- After the electrostatic film is pasted firmly and smoothly. Use step.
ADJUST
When in use, the suction cup can rotate 360 degrees and can be adjusted freely
according to the use demand.
360° ADJUSTABLE
- When the electronic device needs to be removed, press the button in the middle of the suction cup to easily remove the electronic device. (please do not pull it forcibly)
- After the bracket is installed, use USB-A to USB-C or USB-C to USB-C to access the charging port of the bracket. The indicator light of the bracket is on. Put the mobile phone on to realize wireless fast charging.
MATTERS NEEDING ATTENTION
a. In case of uneven back or air leakage of electronic equipment, please use
electrostatic film, or use a flat and smooth protective sleeve for electronic
equipment.
b.Please do not pull the electronic device after it is firmly sucked. Please
use the release button to remove it.
c.Do not absorb heavy objects more than 5kg.
d.Clean the suction cup surface regularly to avoid dust affecting the suction.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>