HP5S Outdoor Indoor Home Theater Speaker w Swivel Bracket Owner’s Manual
- June 13, 2024
- HP
Table of Contents
HP5S Outdoor Indoor Home Theater Speaker w Swivel Bracket
Mounting
- Use the included mounting template to mark location of the mounting screws. Use a level to ensure that the template is square with its surroundings. Once the it is level, mark the location of the two screw holes. Be sure to use all the scren holes as this will ensure that the speaker bracket is securely attached to the mounting surface. Please note, these speakers can be mounted horizontally or vertically.
- Remove the template and drill holes were your marks are. If you are unable to drill into a stud, be sure to use anchors.
- Gently pull the speaker wire through the large circular hole in the middle of the bracket. Now place the bracket against the mounting surface so that the holes all line up. Use the included hardware to attach the bracket to the mounting surface.
- Mount the speaker to the bracket and tighten the moutning knobs. Do not tighten completely. Check to make sure the speaker is in phase and functioning correctly. Angle the speaker to desired position.
- Hand tighten the bracket knobs. Do not use power tools as they may over tighten the knobs and strip the threads of the insert. Double check that the installation is safe and secure.
Thank you for purchasing these Rockville HPSS outdoor/indoor home theater
speakers. They feature heavy duty ABS construction and can literally be thrown
off your roof without getting damaged. With an IP44 (Ingress Protection)
rating, you can keep them outdoors in the rain and moisture and they will not
get damaged. These speakers are perfect for patios, large backyards, and
indoor applications. They’re also perfect for use in commercial spaces like
gyms, hotels, and more. Each pair puts out 140 watts RMS and 420 watts peak
power. These speakers are extremely loud! Rubber surrounds eliminate unwanted
distortion and screw-type banana plug terminals make for easy and secure
wiring.
Please read this guide carefully for proper use of your HP5S speakers. Should
you need assistance, please call our technical help line at
1-646-758-0144, 24 hours a day/7 days a
week.
Features/Specifications
- Peak Power Handling: 420 Watts (per pair)
- RMS Power Handling: 140 Watts (per pair)
- Polypropylene Cone
- Rubber Surrounds
- 1″ Aluminum Voice Coils
- 5.25″ Woofer
- ½” Mylar Dome Tweeters
- 10 oz. Ferrite Magnet
- Binding post terminals
- Splash resistant (IP44)
- Tough ABS Construction
- Swiveling Metal Mounting Brackets
- Removable Metal Rustproof Grills
- Built-in Capacitor Crossover Network
- High-Pass filter switch
- Frequency Response: 60Hz – 20KHz
- Sensitivity: 90dB @ 1w/1m
- Impedance: 4 Ohm (HP5S and HP5S BK) 8 Ohm (HP5S-8 and HP5S-8 BK)
- Dimensions (HWD): 9.8″ x 7.1″ x 5.7″ (250 × 180 × 145 mm)
- Colors (with paintable grills): White (HP5S and HP5S-8) Black (HP5S BK and HP5S-8 BK)
Dimensions
Connecting your Speakers
Connecting the speakers to your amplifier or receiver.
- First turn your sound source off to avoid damage which may result from accidental shorting of the speaker leads.
- Correct phase polarity is critical for proper stereo imaging and bass performance. The red (+) terminal on your amplifier or receiver must be connected to the red (+) terminal on your speaker, the same applies for the black (-) terminal.
- Connect one loudspeaker at a time to ensure proper connection of left and right channels. Make sure all wires are firmly fastened.
- If you notice a high level of bass or central image focus, double check your connections for proper polarity.
- HP Filter switch (a): This switch activates the high pass filter with a cutoff at 60hz. The high pass filter will take away or attenuate frequencies below the cutoff frequency. This is particularly useful when you have a subwoofer in the set up that is used for the bass frequencies. You can use the HP filter to prevent build up of low frequencies coming from too many speakers. A build up of low frequencies may cause those low frequencies to not sound as clear as they could.
ATTENTION
WATCH THIS VIDEO BEFORE FIRST USE! Who reads manuals? Scan the QR codes or go
to the URLs to access how-to video(s), the owner’s manual, and other important
information you may need to get the most out of your item. If you prefer
written instructions, please read ahead! With Rockville you get many options.
- rockvillesupport.com/hp5s.
- rockvillesupport.com/hp5s-8.
- rockvillesupport.com/hp5s-bk.
- rockvillesupport.com/hp5s-8-bk.
Missing items? If you ordered a bundle that includes more than one product and you are missing part of your bundle, then it just means your order shipped from two different warehouses. You will receive the remaining items very soon. If you have any concerns or inquiries, feel free to call our customer support center at 1-646-758-0144. 24 hours a dav/7 davs a week.