Bluetooth Headphones Wireless Earbuds Sports 35H Play Time Earphones-Complete Features/Instruction Guide

: June 5, 2024
: Generic

Table of Contents

Generic

Generic

Bluetooth Headphones Wireless Earbuds Sports 35H Play Time Earphones

Bluetooth-Headphones-Wireless-Earbuds -35H-Play-Time-Earphones-
imgg

Specifications

CONNECTIVITY TECHNOLOGY: Wireless, Bluetooth 5.0
NOISE CONTROL: Active Noise Cancellation
WATER RESISTANCE LEVEL: Waterproof
FREQUENCY RANGE: 33 feet
PLAY TIME: 35H
BLUETOOTH: 5.0
CHARGING CASE: 600mAh
WATERPROOF: IPX7

Introduction

The Bluetooth headphones may provide 5 hours of nonstop playtime due to the Bluetooth 5.0 chip’s lower power consumption. The earbuds can be charged six times by the 600mAh charging case, giving a total play time of up to 35 hours. Just relax and enjoy the music all day long! We’ve now created the most recent iteration of ear hooks that can completely fit your ears after extensive testing and ongoing refinement. These wireless earphones maximize comfort and stability at the same time thanks to the skin-friendly material. Even after prolonged use, there is no longer any discomfort or pain, and the earphones never fall out! The supplied ear hooks were made specifically to fit your ear shapes and provide the maximum level of comfort while wearing them without falling out. Our Bluetooth earphones enable you fully concentrate on and enjoy your exercises because they are made of IPX7 waterproof material. You don’t have to worry about mistakes like an abrupt pause brought on by an accident contact from moving hands thanks to the button operation method.

Using the most recent wireless pairing technology, you may effortlessly switch between stereo and mono modes. When you place one of the wireless earbuds back into the case with our Bluetooth headphones, you don’t need to reconnect them with your phone and click again to start playing music, giving you the convenience that other headphones on the market can’t match.

PACKAGE INCLUDES

1* Pair of Earbuds
1*Type-C Charging Cable
1* User Manual
3* Pairs Eartips
1* Charging Case

HOW TO PAIR

To activate the earbuds, remove them.
From the Bluetooth list on your phone, select “ET1” to connect. When removed from the case, the earbuds will instantly re-connect to the most recent connected mobile device. P.S.

HOW TO PREVENT THE BATTERY FROM BEING OVERLOADED

The charging pins on the earphones will have an insulating layer applied to them to prevent the battery from being overloaded. Once your headphones are fully charged, please remove the insulation film and use them.

HOW TO RESET

Remove the headphones’ charging cable from the device. For 10 seconds, press and hold the power button. When the LED light starts to blink, your headphones have been successfully reset.

HOW TO CONNECT WIRELESS HEADPHONES TO A PHONE

Pull down the phone’s top shade on an Android device, then long-press the Bluetooth icon. It will immediately take you to the Bluetooth menu, where you may enable it and then start looking for devices. To link a pair of headphones, tap their name.

HOW TO SETUP

Open the settings first.
Tap Connections after that.
Next, tap Bluetooth.
In the top-right corner of your screen, select Scan.
Next, hold down the power button on your headphones for a few seconds.
Find your headphones and tap them at the end.

Frequently Asked Questions

Why won’t my earbuds pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
Why don’t my wireless earbuds work?
If the battery in your headphones is low, they might not be able to pair. Additionally, I’ve discovered that certain Bluetooth headphones stay on when in the case, which causes them to deplete to zero percent more quickly than you would expect. Even if they claim to have some battery left, try plugging them in and giving them a thorough charge before pairing.
Why won’t my phone and Bluetooth headphones pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
On wireless earphones, where is the power button located?
All of the functions are on the same side, which is fantastic. If you decide to connect to your phone, the center button also serves as the “answer and hang up” button.
Are wireless earbuds functional without WiFi?
Yes, in a nutshell. WiFi is not necessary for Bluetooth headphones, and they function perfectly without it
How do wire-free earphones function?
Wireless headphones function by radio or infrared signal pairing with the device you want to use. To facilitate connections for users, a lot of gadgets employ Bluetooth technology. Bluetooth-enabled devices may communicate and share data across incredibly short distances utilising radio signals.
How can my earbuds be reset?
The standard process for resetting earbuds like these is to 1) put the earbuds in the charging case while leaving the lid open, and 2) press and hold the charging case’s button for 10+ seconds. At that point, the charging case’s indicator light should change to show that the reset was successful.
Why do my headphones not allow me to hear anything?
Be sure to turn on your audio source and turn it up. Make careful to increase the volume if your headphones have a knob or button for them. Make sure the battery has enough juice if you use headphones that run on batteries. Check the headphones’ connection.
Why do my wireless earphones only function on one side?
Depending on your audio settings, headphones might only play in one ear. So make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
Why does one side of my Bluetooth earphones not function? The sound cannot be played if the Bluetooth headphones are covered with dust, wax, or lint, which results in a situation where one side functions and the other does not. Therefore, you must first make sure that your Bluetooth headphones are clean.