JVC XP-EXT1 Wireless TV Headphone System User Guide

JVC XP-EXT1 Wireless TV Headphone System

Setting Up {Connection and Measurement)

1. Use the supplied charging cable
   

2. Download and Install the application on your smartphone
   Application name:

3. Connect the HDMI input (eARC/ARC) terminal of the TV to the output terminal of the processor unit
   

4. Carry out the measurement In a quiet environment. Keep your head still, and don’t talk during the measurement.

• Connect using the supplied setup cable

• Turn on the power of the processor unit and headphones
  

• Connect the processor unit to the smartphone via Bluetooth

  • Press and hold the [SOUND MODE/PAIRNG] button for about 3 seconds until the [BT CONNECTION] starts flashing in white

  • Select “JVC XP-EXT1 P” from the device list.

  • Connection is complete after the [BT CONNECTION] indicator lights up in white.

  • If the [BT CONNECTION] indicator does not light up in white, start up the app.

• Put on the headphones

  • Put on the headphones so that they fit snugly around the ears by covering the ears completely with the ear pads and adjusting the angle of the ear cups.
  • Face straight ahead during the measurement.

• Start up the app and take the measurements Tap the !START MATCHING] button

• Disconnect the setup cable

Viewing

1. Turn on the power of the headphones

2. Switch the input source

3. Play the audiovisual device for viewing

• Adjust the volume level
  • Adjust by touching and sliding up or down.
  • You can also adjust the volume from the app.
• Turn off the power of the headphones

For detailed operations and information on the European Guarantee, please refer to the user manual.

• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
• Google Play and the Google Play logo are trademarks of Google LLC.
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories

http://manual3.jvckenwood.com/ home/theater/contents/xp-ext1 /en

FCC RULE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Operation of this device is restricted to indoor use only.(5GWIFI)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>