JZAQ BT30 Helmet Bluetooth Headphone User Manual

JZAQ BT30 Helmet Bluetooth Headphone

Thank you for choosing our products. To make sure you can use the product correctly, please read the following directions carefully before using it, then follow it strictly.

SAFETY WARNING:

• The device is only lPX7 life waterproof, please do not put it under water or use it in the rain.
• Please do not expose the product to acid, alkaline, or hard and pointy objects when using.
• If the product is wet or damp from the rain, or moldy, please place it in a low-temperature dry place, do not insolate or put into the oven and other high-temperature places.
• Please do not throw the device and its battery into the fire.
• Please do not disassemble, repair or refit the product.
• Please do not pull or throw the product.

SPECIFICATIONS:

1. Bluetooth Version: V5.0+EDR
2. Frequency Response: 2.402GHz-2.480GHz
3. Bluetooth Distance: 20M
4. MIC distance: 1M
5. Lithium Battery: 3.7V/900mA
6. Charging Time: 2-3 hours
7. Standby Time: 500 hours
8. Working Time: 55-60 hours
9. Bluetooth Matching Name: BT30

FEATURES:

1. Bluetooth V5.0+EDR version, available for most devices with Bluetooth function.
2. Automatically answer the incoming call, and support to refuse the call by hitting any buttons 2 seconds when phone call in.
3. Support display battery on the phone
4. Support 1-driven-2 mode.

Fig 1

Fig 2

FUNCTION & OPERATION

Charging
Plug the micro USB port into the earphone, then connect it to the computer or adapter by the USB cable, at the time, the LED light will turn red when the LED light is turned on blue light, it means the speaker is fully charged, please pull out the cable.

Notice

1. First time using this product, please fully charge the product for 2 to 3 hours.
2. When it is charging, helmet headphones can not play music or answer the phone call.

Power on
Press the “>|l” button 3 seconds, the device is on once
“Blue” LED slowly flashes.

Power off
Press the I “button 3 seconds again, the device is off
while the LED is off.

Paring
Press and hold the key “>|I ” for 5 seconds until the LED light flashes blue and red, please try to search the Bluetooth name of ” BT30 ” on your phone, set in the password of “0000” if it is the first time to pair the device when you hear “connected” means paired successful and the Blue LED slowly flashing.

Automatically Re-pair
Your device can be automatically re-pair promptly once both devices do not cancel the paring, and hearing “connected” means the device is paired.

Play/Pause
Press the “I “button to pause the song, and press it again to continue the song

Previous Song/Next Song

• Press the”-” button one time for the previous song
• Press”+” button one time for the next song

Volume Increase/Decrease

Decrease the volume: Press and hold the “-” button to decrease the volume and when the volume is reduced to a minimum make a “Dong” sound.
Increase the volume: Press and hold the “+” button to increase the volume and when the volume is increased to a maximum make the “Dong” sound.

Phone Call Answer

(Automatic or Manual Answer)

1. Call answer: When the phone comes in, you can dial the number and answer it automatically, or just press the “ ” button to answer it.
2. Refuse call answer: Press the “ ” button for 2-3 seconds.
3. Automatic/Manual Answer: Before connecting the phone to Bluetooth, hold down the volume “+” button and the volume “-” button at the same time to switch between automatic and manual answers.

Support “Siri” voice assistant
Short press ” >l”‘ three times to start the smart voice assistant to make calls.

Low Power Warning
The device sounds “Dong Dong’warning voice while working, it means the power is low, please charge it.

Power Save Mode
The device will be off automatically after 5 minutes no working device pairing it.

Drive-2 Mode
The phone support two simultaneous pairings:
First pair the phone 1 with the Helmet Headset and then disconnect the phone 1’s Bluetooth; After pairing the Helmet Headset with mobile phone 2, open the Bluetooth of mobile phone 1 and click connect “BT30” to connect two mobile phones at the same time; Now phone 1 and phone 2 paired with Helmet Headset together and support to answer any call from two phones (Note: phone1 and phone 2 can not answer calls at the same time.).

Installing Step

Step1
Take out the Helmet headphones from the color box, stick the “Magic Tape “on both earphones.

Step2
Tear off the 3M tape paper of the earphones, and stick it into the helmet ear position on both sides, before sticking it, please align the position well, see Fig3.

Accessories

• 1 Helmet Headphone
• 2* Detachable Clip
• 1 USB Cable
• 1* User Manual

It can automatically answer a call after the number is announced

Treble and bass Settings:
Please press and hold the “ + ” button or ” – ” button to increase or decrease the volume (If you think it is not easy to control the volume on the Bluetooth headset, you also can adjust the volume on your phone to achieve what you want.).

Switch between Chinese and English：
The Helmet Bluetooth Headset language is English by default. If you want to switch languages please turn on the headset first without connecting to Bluetooth, and then press the power on button twice to switch the language.

Tips:

If you have any questions during the use of our product, please feel free to contact us via the seller center. If technical support is required, please contact www.jzaq.com.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement.

References

• JZAQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>