ZEBRONICS ZEB-101 Moving Monster X8L Trolley Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-101 Moving Monster X8L Trolley Speaker
Thank you for purchasing Zebronics Speaker. Please read this user manual carefully before operation & save it for future reference.
Note:
- Avoid the use of this speaker at a hightemperature and high humidity environment.
- Avoid self-disassembly of the speaker or it will result in the failure of the warranty.
Features
- Wireless BT / USB /
- Micro SD / FM /
- AUX / Mic Input
- Recording function
- LED Display
- LED Lights with On/Off switch 20.3cm full-range speaker Remote control
- Wireless Mic
- Built-in rechargeable battery Karaoke function
Specification
- Output power:24W
- Driver size
- Full range : 20.3cm
- Tweeter:2.Scm
- Impedance
- Full range :3
- Tweeter :8
- Frequency response: 80Hz-18kHz
- S/N Ratio: 260dB
- File format support
- (USB/mSD): Mp3, WMA, WAV
- Line input: 3.5mm
- Max. supported
- USB/mSD memory size: :32GB
- FM frequency range: 87.5 MHz – 108 MHz
- Charging time: 5 H
- Playback time: 6 H*
- BT Name: ZE
Control Description
- LED Display
- Mode Change Key
- Record
- MIC Priority
- Previous Track/FM Channel Key
- Play/Pause Key
- Next Track/FM Channel Key
- Micro SD & USB Slot
- On – off Switch
- Master Volume Control
- Mic Volume Control
- Echo Contro I
- LED Indicator
- AUX IN
- MlcrophoneJack
- LED On-Off Switch
Remote Control
- Mute/Unmute
- Mode change
- Recording
- Play recorded file
- Volume+
- Volume-
- Next Track/FM channel
- Previous Track/FM channel
- Play/Pause key
- Repeat key
- EQ Preset
- Numeric selection (0-9)
General Instruction
BT connectivity
Switch the Speaker to BT mode, Scan for nearby BT devices in your mobile. Tap
on ZEB-101 MOVING MONSTER X8L to connect.
USB/Micro SD Mode
Insert the USB/Micro SD Card to the speaker. The speaker will detect the
USB/Micro SD Card automatically & the songs from it will be played.
FM Radio
Switch the Speaker to FM, In FM Mode, Long press the Play/Pause Key to scan
the available FM channels. Once the scanning is done, The Speaker will start
playing the first scanned channel.
AUX-In
The Speaker can be connected to an audio device using a 3.5mm Cable. Connect
the one end of the Cable to the speaker &connect the other end of the cable to
an audio source. The songs from the audio source can be heard through the
speaker.
Recording Function
To record a voice, first plug in a USB/Micro SD card into the speaker which
will act as a storage device. Press the REC. key on the remote to start/stop
recording. Once the song or voice is recorded through the Mic, press the REC.
PLAY key to play the recorded file.
Note: Speaker can record the Mic input only.
Charging instruction
Charging of the speaker can be done with the help of the power cord that is
included with the package contents
Note:
- Charging Indication: Red LED Blinks
- Full Charging Indication: Red LED Glows