VIRMEE VT3 Smart Fitness Watch User Manual

**VIRMEE VT3 Smart Fitness Watch

**

**WHAT’S INCLUDED

**

**PRODUCT OVERVIEW

**

GETTING STARTED

1.  Charge Your Watch

   • Step 1: Insert the USB end of the Charging Cable into a USB adapter, power bank, or a USB port.
   • Step 2: Hold the other end of the Charging Cable to approach the Charging Pins on the back of the watch until they attach magnetically. 
     Note:
     If the Charging Cable can not magnetically attach on the Charging Pins of the watch, please change the direction of it.

2.  WearYourWatch

   •  To make the data tracking more accurate, we recommend that you wear the watch with one finger’s width below your wrist bone.
   •  Please make sure the watch fits snugly against your skin and will not move upward or downward during exercise.

3. Change the Watch Bands

   • Step 1:
     Turn over your watch, then press the quick-release lever inward and gently pull the original watch band away.

   • Step 2:
     Get another band, slide the pin into the notch on the watch, then press the quick-release lever inward and slide the other end of the watch band into place.

   • Step 3:
     Release the quick-release lever when the pins on both ends are securely inserted into the notch.

4. Power On/Off
   Long press the Power Button for 3-4seconds to power on the watch, then select your language. To power it off, long press the Power Button for2-3 seconds and tap Shutdown on the screen.

   • Functions of the Power Button

5. Touch Navigation

OPERATION BASICS

Function Overview on the Watch

•  Swipe up from the bottom of the home screen to switch the interfaces among Calories, Stand, Steps and Reading.
•  Swipe left/right on the home screen to check the applications and 18 available exercises on your watch.

HR

Perform a heart rate test to monitor your heart rate.

Stress

Follow the tips on the watch to test your stress.

Scientific Sleep

Track your sleep quality from 8:00PM to 9:00AM.

Heart Health

Test the health of your heart. Please check the data monitored on the app.

Sp02

Test the amount of oxygen being carried by red blood cells. A normal reading is 90%-100%.

Message

Display message when you receive a new message with Bluetooth connected.

Alarm

Screen on and vibrate to notify you if an alarm is set on the app.

Timer

Select a time interval or custom new time interval(s), then count down from that time interval.

Stopwatch

Measure the amount of time, and tap Lap to track the number of laps when needed.

Compass

Hold the watch horizontally to identify the direction.

Settings

Tap to change the watch face, adjust the brightness, check the Bluetooth name, the version of your watch and reset the watch.

Operate via VlRMEEApp

We’ll update the user manual according to the latest app version ofVIRMEE, please visit www.virmee.com to get the latest instructions.

1. Download and Install the App
   Search and download VIRMEE App from APP Store/Google Play or scan the QR code directly.

2.  Pair the Watch with Your Mobile Device

   • Step 1: Turn on your watch, slide left/right to select Settings, then tap About to check the Bluetooth name of the watch.
   • Step 2: Enable Bluetooth on your mobile device.
   • Step 3: Launch VIRMEE on your mobile device and register an account.
   • Step 4: Follow the in-app instructions to create your profile.
   • Step 5: Tap Device>+> SEARCH AGAIN on your mobile phone, then tap VIRMEE_XXXX to connect.
     Notes:
     If you have an Android device, please permit the watch to access your location, otherwise, the watch may not be searched.  Please give full permission to the watch to sync the information, otherwise, the app may fail to display all the available options.  The watch can only pair with one mobile device at a time.

3. Function Overview on the App

Tap Device on your mobile device to know more functions of your watch.

• Change Dial
  Tap to custom and change your watch face.

• Alarm
  Tap to add/manage alarm clock(s).

• Sedentary reminder
  Tap to set a sedentary reminder when you sit for too long.

• Smart reminder
  Set to On to receive phone call/SMS notifications.

• Easy camera
  Enable it, then tap the watch to take a photo and save it to your device.

• Time format
  Switch time format between 12h and 24h.

• Date format
  Switch date format between Month/Day and Day/Month.

• Unit of measurement
  Set measurement unit when exercising(Run, Fast Walk, and Pool Swim).

• Language switch
  Change the language of your watch. Please tap Save on the top right corner if the language is selected.

• Vibration remind
  Set vibration reminder and cycles for call, alarm, sedentary, and more.

• Palming gesture
  After enabling this function, the watch will screen on when you flip your wrist at the set time period.

• Bright screen time
  Set a time period after which the watch will screen off.

• Do not disturb
  Select a time period during which the watch will mute sound and stop vibration.

• Auto heart rate
  After enabling this function, the watch will test your heart rate every 10 minutes.

• Heart rate guidance
  Set a remind zone for different categories, the watch will vibrate when your heart rate data is below or above the value you set.

• Wearing manner
  If you wear yourwatch on your right/left wrist, please select Right/Left; wrong selection will lead to wrong data.

• Auto-recognition motion
  After setting it to ON, the watch will automatically recognize the exercise you are doing and enter into the sport interface accordingly.

• Firmware upgrade
  Check the firmware version ofyourwatch and update it when available

  •  Before you update the firmware version, please make sure the battery level is more than 50%.
  •  Please do not exit the update interface to avoid update failure.

• Unbind
  Tap to unbind the watch and stop sync data with your mobile device .

**SPECIFICATIONS

**

**MAINTENANCE AND CARE

**

FCC Caution

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

CE Caution
Use the product in the environment with the temperature between 0’C and 50 ‘C; Otherwise, it may damage your phone. It can be operated under 2000m. For the following equipment:
Product Name: Smart Watch
Model:VT3
Shenzhen Van Top Technology & Innovation Co., Ltd. hereby declares that this [Name: Smart Watch, Model: WlO0] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

CAUTION:

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• Do not use other unauthorized chargers power supplies for charging.
• Do not use the product in environment below 0’C or above S0’C for charging.

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. This product can be used across EU member states.

Lithium-ion Battery:

Model: 481525, 3.8V, l 70mAh
DongGuan Golden CEL Battery Co., Ltd
Add: No.11, Yinhu Industrial Park, JiaoYiTang Management Zone, TangXia, DongGuan, GuangDong, China

Bluetooth

Documents / Resources

| VIRMEE VT3 Smart Fitness Watch [pdf] User Manual
VT3, 2AQ3A-VT3, 2AQ3AVT3, VT3, Smart Fitness Watch, Fitness Watch, Smart Watch, VT3, Watch
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>