TRIBIT BTS35 XSound Mega Portable Wireless Speaker User Manual

June 5, 2024
Tribit

Tribit X Sound Mega
Portable Wireless Speaker
BTS35

User Manual

Safety Precautions

  • Avoid dropping.
  • Do not disassemble or repair the speaker.
  • Avoid extrame temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Do not use any corrosive cleanser/oil to clean.

Specification

Bluetooth version: 5.0
Support: A2DP, AVRCP, HFP, HSP
Output power: 30W
Frequency response: 60HZ~20KHz
Frequency band: 2.402GHz~2.480GHz
Maximum transmission power: ≤ 6dBm
Battery: (3.65V 4000mAh*2 ) / 29.2Wh
Music play time: Up to 20hours ( varies volume level and music files )
Charge time: 4H @ 5V/2A
Waterproof: IPX7
Dimensions: 250mm x 87mm x 80mm
Weight: 1020g

What’s in the Box

Overview

|
---|---
1. Power Button / Indicator
2. Bluetooth Button / Indicator
3. MFB
4. Volume –
5. Volume +
6. Light Adjustment Button
7. EQ Mode Button| 8. EQ Mode Indicators
9. MIC
10. Hanging holes
11. NFC
12. USB-A charging port ( output )
13. AUX-IN port
14, USB-C charging port ( input/output )
---|---

Connections

Bluetooth Pairing

  1. Make sure the speaker is on.
  2. Open NFC in your phone.
  3. The NFC area on the phone needs to be close to the NFC area on the speaker. The phone will automatically recognize the speaker and request pairing. Click “agree” to complete pairing.

Broadcast Mode

  1. Make sure both speakers are on, and connect speaker A to device;
  2. Press the Bluetooth buttun both speakers for 5s to enter Broadcast pairing mode, and speaker B will connect to speaker A automatically, the Broadcast Mode is on.
  3. If you want to connect multiple speakers to the group, press the button 5S, the speaker will connect to speaker A automatically.

Button Controls

Function Button Operation
Power ON /OFF Press the button to turn on / off the speaker
Pair Bluetooth Device Press the button to manually enter bluetooth pairing

mode
Broadcast mode| Press and hold the button Ss to enter Broadcast mode
Disconnect Broad- cast mode| Press and hold the button Ss to disconnect Broadcast mode
Play / Pause| | Press once the button
Next track| Double press the button
Previous track| Press the button for 3 times
Voice dial function| | Press and hold the button for 2s to activate ( your device must support this function )
Answer/end the incoming call| Press once the button
Reject an incoming call| Press and hold the button for 2s
Volume Down| | Press the button to decrease the volume level
Volume Up| | Press the button to increase the volume level
Light adjustment| | Press the button to switch or turn off the light
EQ mode| | Press the button to switch Music mode, Bass mode, and Audiobook mode

Indicators

Indicator Light Status
Power indicator White indicator keep sturdily on Power on
Red indicator flashes quickly Battery low
Red indicator keep sturdily on Charging ( Red indicator will power off when

battery full )
Bluetooth indicator| Blue indicator flashes quickly| Bluetooth pairing mode
Blue indicator flashes slowly| Bluetooth reconnecting
Blue indicator keep sturdily on| Connected
White indicator flashes quickly| Broadcast pairing mode
EQ indicators| Xbass indicator keep sturdily on| Bass mode is on
Music indicator keep sturdily on| Music mode is on
Audiobook indicator keep sturdily on| Audiobook mode is on

Reset

If this speaker has any problem, you can try to press and hold “Volume +” and “Volume -” buttons simultaneously for 5s to reset this spaeker and remove the old pairing in your Bluetooth device, and then pair again.

Customer Service

  • 18-month limited warranty
  • For FAQS and more information, please visit: Email: support@tribit.com

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals