EZVIZ CSC6N1G2 Smart Home Camera User Guide
- June 5, 2024
- ezviz
Table of Contents
Regulatory Information
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC and its amendment
2013/56/EU (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see:
www.recyclethis.info
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment
type [CS-C1C, CS-C1HC, CS-C1T, CS-C2C, CS-CV206, CS-CV310, CS-C3N, CS-C3W, CS-
C3WN, CS-C3X, CS-C6N, CS-CV246, CS-CV248, CS-C6CN, CS-C6C, CS-C6W, CS-TY1, CS-
TY2, CS-TY3, CS-CV336, CS-DP1, CS-DP1C, CS-DP2C, CS-DB2C, CS-C4W, CS-C4C, CS-
CV228, CS-C5W, CS-C5C, CS-C5HC, CS-C5X, CS-C5HX, CS-C8W, CS-C8C, CS-C3A, CS-
BC1, CS-W2H, CS-X5S-4W, CS-X5S-8W, CS-A1-32W, CS-T9-A, CS-T4-A] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the
following web link: http://www.ezvizlife.com/declaration-of-conformity.
Use only power supplies listed in the Table.
| Equipment model | Adapter manufacture | Adapter model |
|---|
CS-C1C/ CS-C1HC/ CS-C1T/ CS-C2C/ CS-CV206/ CS-CV246/ CS-C6N/ CS-C6CN/ CS-C6C/
CS-TY1/ CS-TY2/ CS-TY3/ CS-W2D/ CS-A1-32W/ CS-T9-A| Shenzhen Honor Electronic
Co Ltd| ADS-5RE-06 05050EPCU/EPC(US),
ADS-5RH-06 05050EPB(UK),
ADS-5RH-06 05050EPG(EU),
ADS-5RH-06 05050EPSA(AU),
ADS-5RH-06 05050EPBR(BR),
ADS-5RH-06 05050EPI(IN),
ADS-5MA-06A 05050GPK(KR)
CS-CV248/ CS-C6W/ CS-C6Wi/ CS-CV336/ CS-DP1/ CS-DP1C/ CS-DP2C/ CS-C3A/ CS-BC1|
Shenzhen Honor Electronic Co Ltd| ADS-10LA-06 05010EPCU/EPC(US),
ADS-10RH-06 05010EPB (UK),
ADS-10RH-06 05010EPG(EU),
ADS-10RH-06 05010EPSA(SA),
ADS-10RH-06 05010EPBR(BR),
ADS-10RH-06 05010EPI(IN),
ADS-12CG-06 05010EPC(JP)
CS-CV310/ CS-C3N/ CS-C3W/ CS-C3WN/ CS-C3X/ CS-SD1/ CS-C4W/ CS-C4C/ CS-CV228/
CS-C8W/ CS-C8C/ CS-W2H/ CS-W3C-WD1200G/ CS-T8-B| Shenzhen Honor Electronic Co
Ltd| ADS-12FG-12N 12012EPCU(US),
ADS-12FG-12N 12012EPB(UK),
ADS-12FG-12N 12012EPG(EU),
ADS-12FB-12 12012EPSA(AU),
ADS-12FG-12N 12012EPBR(BR),
ADS-12FG-12N 12012EPI(IN)
CS-X5S-4W/ CS-X5S-8W| Moso Power Supply Technology Co. Ltd| MSA-C1500IC12.0
-18P-GB(UK),
MSA-C1500IC12.0-18P-DE,
MSA-C1500IC12.0-18P-AU(AU),
MSA-C1500IC12.0-18P-BR(BR),
ADS-25FSG-12 12018GPI(IN)
Important Safety Information
Note: Please read the manual before using the device.
Caution: This symbol on the device indicates that the safety compatibility manual and / or installation manual must be read, which contains information related to the safe operation of the device. Be sure to read these instructions before operating the equipment.
Warning: The separate earthing terminal must be permanently connected to
earth.
Warning: For SELV DC input: the DC power source shall comply with the
Safety Extra-Low Voltage (SELV) requirements of IEC 60950-1.
Caution: Do not block ventilation openings while the system is on, and
keep at least 2 cm distance from ventilation openings and walls or other
things which may block the openings.
Warning: Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery that can result in an explosion.
Warning: Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable liquid
or gas.
Warning: A battery subjected to extremely low air pressure that may
result in an explosion or the leakage of flammable liquid or gas.
Warning: Dispose of used batteries according to the instructions.
Warning: Replace only with the same or equivalent type recommended by the
manufacturer.
Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.
Warning: Do not ingest battery, Chemical Burn Hazard.
Caution: This product contains a coin/button cell battery. If the coin /
button cell battery is swallowed, it can cause severe internal burns in just 2
hours and can lead to death.
Caution: Keep new and used batteries away from children.
Caution: If the battery compartment does not close securely, stop using
the product and keep it away from children.
Caution: If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
Caution: Risk of fire or explosion if the battery is replaced by an
incorrect type.
FCC Information
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC compliance
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
102026549, B
Package Contents
Camera (x1) Base (x1)
Screw Kit (x1) Drill Template (x1) Power Cable (x1)
Power Adapter (x1) Quick Start Guide (x1)
The camera appearance is subject to the actual model you have purchased.
Basics
- LED Indicator
- Micro SD Card Slot
- Reset Button
- MIC
| Name | Description |
|---|---|
| LED Indicator | Solid Red: Camera is starting up. |
Slow-flashing Red: Wi-Fi connection has failed.
Fast-flashing Red: Device exception (e.g. MicroSD card error).
Solid Blue: Video is being viewed or played back in EZVIZ App.
Slow-flashing Blue: Camera is running properly.
Fast-flashing Blue: Camera is ready for the Wi-Fi connection.
Micro SD Card (sold separately)| Initialize the card in the EZVIZ app before
using it.
Reset Button| Hold for 5 seconds to restart and set all parameters to default.
MIC| For audio in.
Speaker| For audio out.
- Speaker
- Ethernet Port
- Power Port
Setup
1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below.
The LED turning fast-flashing blue indicates that the camera is powered on and ready for Wi-Fi configuration.
2 Camera Setup
1. Create a user account
– Connect your mobile phone to Wi-Fi using your 2.4GHz network.
– Search for “EZVIZ” in the App Store or Google Play(TM).
– Download and install the EZVIZ app.
– Launch the app.
– Create and register an EZVIZ user account by following the start-up wizard.
The camera works with 2.4GHz Wi-Fi signals. If you have a dual-band router with separate 2.4GHz and 5GHz networks, make sure your phone is connected to the 2.4GHz one.
2. Add a camera to EZVIZ
– Log in to your account using the EZVIZ app.
– On the Home screen, tap “+” on the upper-right corner to go to the Scan QR
Code interface.
– Scan the QR code on the bottom of the camera.
– Follow the EZVIZ app wizard to finish Wi-Fi configuration.
Hold the Reset button for 5s in any of the following cases:
• The camera fails to connect to your Wi-Fi network.
• You want to select another Wi-Fi network.
Installation (Optional)
1 Install the Micro SD Card (Optional)
1. Rotate the sphere upwards until you see the card slot.
2. Insert the Micro SD card (sold separately) into the card slot as shown in
the figure below.
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.
3. In the EZVIZ app, tap the Storage Status in the Device Settings
interface to check the SD card status.
4. If the memory card status displays as Uninitialized , tap to
initialize it.
The status will then change to Normal and it can store videos.
2 Install the Base
The camera can be placed horizontally or mounted on the ceiling. Here we take ceiling mounting as an example.
- Make sure the ceiling is strong enough to withstand three times the weight of the camera.
- Avoid positioning the camera in an area that gets a lot of light shining directly into the camera lens.
– Place the drill template onto the surface you have chosen to mount the camera.
– (For cement wall/ceiling only) Drill screw holes according to the template, and insert three anchors.
– Use three metal screws to fix the camera base according to the template.
- Drill Template
- Anchors
- Metal Screws
Please tear up the drill template after installing the base if needed.
3 Install the Camera
Mount the camera to the base, and turn it clockwise until it is fixed.
After installing the camera, please go to the EZVIZ app to flip the camera image.
For detailed information, please visitwww.ezvizlife.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>