poooli L1 Portable Mini Thermal Printer User Guide
- June 5, 2024
- poooli
Table of Contents
poooli L1 Portable Mini Thermal Printer
Packing List
Note: The packing materials are actually based on the order.
Appearance
- Power button
- Parrot mouth accessory
- USB Port
- Reset button
Using Guide
Power Button Status
Hold down for 3 seconds to ON/OFF
- Lighting: Standby / Charging completed
- Notify Light slow flash: Charging / Updating
- Fast flash: Supplies near end, cover open,
- low battery, the print head is overheated
Charging
Use it for the first time after purchase
- Charging
- Use it for the first time after purchase
USB Cable
In addition to the dedicated charger, you can also use the charging cable of
mobile device.
- Recommended to use a dedicated charging cable to charge.
- It takes about 90 minutes to charge with 5V/1A.
Print Paper Purchase
From APP, Tmall, Jingdong Mall
Official website (www.poooli.com)
Connection
Register and log in to the app, click Add Device. Connect to the device by searching for Bluetooth or scan code.
APP Setting
Double click the power button
Print QR code
- Double click the power button to print the QR code.
- Add the Scanning function by APP, then connect the device by scanning QR code.
Bluetooth 4.0
Bluetooth pairing
- When the first connection succeeds, the next time you star the application that will connect Poooli L1 automatically.
- In the connection state, double click the power button to disconnect the connection.
Simple operation
APP setting
- You can view information such as remaining power, firmware versions in device management
Disassembly
Dismantle
If you want to remove the parrot mouth accessory , please according to the
step take them down.
Install
If you want to attach the parrot mouth accessory, use the magnet to adsorb the
parrot mouth.
Replace Supplies
Place Poooli as shown in figure 1, and look at the arrow.
With reference to figure 2, push down the upper cover.
When replacing supplies, place the supplies in reference to the direction
shown in figure 3.
If the supplies are properly placed, close the upper cover to the lower cover
and push the upper cover back to its original shape.
When changing supplies , do not touch the print head in case of ovweheating.
Offical Supplies Types
Self-adhesive Paper| With adhesive backing, cutiable size, can be preserved
for 10 years
---|---
Ten-year Thermal Paper| Clear printing, stable color rendering, suitable for
daily use, can be preserved for 10 years
Gray-scale Paper| Suitable for photo printing, waterproof, oil proof and
scratch proof, can be preserved for 7 years
Label Paper
| Stickers with adhesive backing, fixed size, can be preserved for 10 years
Affordable
Thermal Paper
| Affordable, suitable for text printing, can be preserved for 2 years
All Poooli paper does not contain bisphenol-A.
If the printer failure is caused by using other paper, you will not be able to enjoy the three guarantees policy.
Safety
Battery overheating
Battery management and cautions
When the charge is completed, please unplug the charging line.
To avoid fire, do not charge at high temperatures(e.g. sweating rooms, bonfire
accessories, etc.).
Charger attention
Print head management and cautions
There may be damage to the print head due to improper charging. We recommend
not to use Poooli L1 in high humidity or dusty areas.
Combustion hazard
Print head overheating
After printing, do not touch the print head directly to prevent burn.
Charging port damage phenomenon Charging cautions
- Please gently insert or unplug the chargingline to prevent excessive damage to the charging port.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
FCC
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.