verizon RC400LX Exclusive Orbic Speed Mobile Hotspot User Guide

verizon RC400LX Exclusive Orbic Speed Mobile Hotspot

Getting Started

Thank you for choosing the Orbic Speed X 4G LTE mobile hotspot device.

Note: This User Guide provides the basic operations of the Orbic Speed X.

General Appearance

1. Menu button
2. Signal status icon
3. Network mode icon
4. Wi-Fi signal icon
5. Unread message icon
6. Battery icon
7. Power button
8. USB Type C port
9. Battery cover
10. Cutout to remove back cover

Display Layout and Icons

Description

1. Signal status icon
2. Network mode icon
3. Send/receive data activity arrows
4. Wi-Fi signal and number of access users
5. The number of unread messages maximum is 100
6. Battery capacity icon, if battery capacity is lower than 20%, this icon is red.

SIM Card and Battery

• Your Orbic Speed X comes preinstalled with a 4G LTE SIM card.

Notes

• The SIM card MUST remain in your Orbic Speed X when in use. Once the SIM card has been inserted into the Orbic Speed X, do not remove it!
• DO NOT remove the SIM cards when the device is powered on since this may damage the card and the device.
• Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water, or dirt.

Inserting and Charging the Battery

1. Use the thumb catch at the bottom of your Orbic Speed X to open the battery cover and align the battery contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks into place. (Figures 1 and 2)
2. Place the battery cover over the battery compartment and press it down until it clicks into place. (Figure 3)
3. Your Orbic Speed X comes with a charger. To charge: Plug one end of the charger into an electrical outlet and the other end into the Orbic Speed X Type-C Port. (Figure 4)

Removing the 4G LTE SIM Card

1. Power off the Orbic Speed X. Remove the battery cover and take out the battery.
2. Gently remove the SIM card from the SIM card slot

Setting up a Wi-Fi connection

1. Press and hold the “power” button for 3 seconds until the welcome logo is displayed on the screen, and Wi-Fi is on.
2. Use your terminal devices to search the wireless network connection with the Wi-Fi’s SSID of “4G-WIFI-2.4G-XXXX ”or “4G-WIFI-5G-XXXX ” and click “Connect”. If the security mechanism is applied, you need to enter the correct PASSWORD.

Note

• XXXX is the last 4 digits of device MAC.
• The default password is the last 8 digits of IMEI.
• You can also find the default SSID and Password in the WIFI Info page of the Orbic Speed X screen.

How to change the SSID & Password

1. Log in to http://192.168.1.1 and enter the management page.
2. Select Settings> Wireless> WLAN Settings, then you will see “Wi-Fi Name(SSID) ” and “Password”, Make sure you delete the old name and password and enter the new name and password as you require.
3. Select “Apply” button, wait for the screen to display prompting “Success”, and then log out.
4. Wait for the computer or laptop screen to display the Wi-Fi icon. This means the wireless network connection has been successful.

Logging into the Device Management Website

1. Make sure your device is connected to the Orbic SpeedX via Wi-Fi.
2. Open the browser, and enter http://192.168.1.1 in the address bar.
3. Enter username and password, and click “Login”. The administrator has the right to check and modify configuration permission.

Note: The default username is admin, and the default password is 12$XXX(XXX is the last three digits of IMEI)

Restore Factory Settings

If you are uncertain of which Wi-Fi settings you have configured or changed, there are two ways you can restore the factory defaults.

• Option 1: Log into the Device Management Website to restore to factory default settings.
• Option 2: Press and hold the “Reset” button in the battery compartment for 5 seconds. See figure 5.

Troubleshooting

If you are having trouble with Orbic Speed X, here are a few things you can do to get it to function properly.

1. If the Orbic Speed X is not responsive, reboot it by pressing the“Power” button for about 8 seconds
2. Restore factory settings

Q&A

Q: What do I do if I see the SSID but failed to connect?

• A: Check the password you entered is the right one.

Q: What to do if there is no service?

• A: The possible reason is listed below:

1. Unstable local signal.
2. Hardware problem.

You can try the following solutions:

1. If you are inside a building or near a structure that may be blocking the signal, change the position or location of the device. For example, try moving the device close to a window.
2. Check the hardware or use another device and retry.

Q: What to do if I forget the Wi-Fi Key?

1. A: You can find the Wi-Fi Key in the Wi-Fi Info page on the screen.
2. You can also reset the device to factory defaults by pressing the reset button for 5 seconds.

Q: Data connection failed.

• A: You have no network coverage. Try moving location until you get good reception.

Q: The modem cannot connect to the internet when overseas

• A: you can check if the data roaming function is enabled in the Device Setting page on the SCREEN.
• Make sure you have international roaming enabled on your plan. You can contact your service provider before you go overseas to enable roaming.

To the Owner

• Some electronic devices, such as the electronic system of vehicles, are susceptible to electromagnetic interference sentby your device if inadequately shielded. Please consult the manufacturer of your device before using if necessary.
• Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off if necessary. Consult a physician or the manufacturer of the medical device before using your device.
• Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your device if required.
• The use of electronic transmitting devices is forbidden in aircraft, at gas stations, and in hospitals. Please observe and obey all warning signs and the power of your device in these conditions.
• Do not touch the inner antenna area if not necessary; it will affect your device’s performance.
• Store your device out of the reach of little children. Your device may cause injury if used as a toy.
• Do not touch the metallic parts of your device when the device is operating as this may cause burns.

Using Your Device

• Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your device’s performance, and violate related national regulations about telecom terminals.
• Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic waves; it may influence signal reception.
• Your device is not waterproof. Please keep it dry and store in a shady and cool place.
• Do not use your device immediately after a sudden temperature change. In such a case, it will produce moisture inside and outside your device. Wait until it becomes dry.
• Handle your device carefully. Do not drop, bend, or strike it; your device may get damaged.
• No dismantling by non-professionals and only qualified technicians can undertake repair work.
• An operating temperature range of -10°C – +40°C and a humidity range of 5% – 95% are recommended.

Battery Handling

• Do not short-circuit the battery, as this can cause excessive heat and fire.
• Do not store the battery in hot areas or dispose of it in a fire, as this can cause an explosion.
• Do not disassemble or modify the battery.
• When not using the battery for a long period, remove it from your device and store it in a cool, dry place.
• Never use a damaged or worn-out charger or battery.
• Return the worn-out battery to the provider or put it in an approved recycling container. Do not put it in your regular house trash.

WARNING:  If the battery is broken, keep away from it. If it touches your skin, wash your skin with abundant fresh water and ask a doctor for help if necessary.

Limited Warranty

This warranty does not apply to defects or errors in the Product caused by:

1. Reasonable abrasion.
2. End User’s failure to follow device provider installation, operation, or maintenance instructions or procedures.
3. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing, or operation of the Product.
4. Modifications or repairs not made by the device provider or a certified individual.
5. Power failures, surges, fire, flood, accidents, actions of third parties other events outside device provider reasonable control.
6. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage.
7. Any other cause beyond the range of normal usage intended for the Product.

• End-User shall have no right to reject or return the Product or receive a refund for the Product from the device provider under the above-mentioned situations.
• This warranty is End User’s sole remedy and device provider’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability

The device provider shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not the device provider had been advised, knew, or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

WARNING: Reproductive Harm – www.P65Warnings.ca.gov.

Important Safety Information

Keep the mobile hotspot (“Product”) away from dust, water, damp areas, precipitation, and humidity. Dust, water, liquids, precipitation, and humidity may cause overheating, electrical leakage, and/or product failure. The Product, battery, charger and AC adapter are not waterproof. Keep them away from liquid, fuels and chemicals. If the Product gets wet, do not place the Product in an oven, microwave or dryer, as this will damage the Product and could cause a fire or explosion.
Only use the battery and charger approved by the manufacturer. Using other brands may cause battery leakage, overheating, explosion or even fire. Do not use the Product where it might cause danger.

Battery Use

Handle and store batteries properly to avoid injury or damage. Most battery issues arise from improper handling of removable batteries and, particularly, from the continued use of damaged batteries.

• Do not disassemble or open crush, bend or deform, puncture or shred
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or another hazard.
• Only use the battery for the system for which it is specified
• Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. The use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or another hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
• Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. The use of an unqualified battery may present a risk of fire, explosion, leakage or another hazard.
• Only authorized service providers shall replace the battery. (If the battery is non-user-replaceable).
• Promptly dispose of used batteries in accordance with local regulations
• Battery usage by children should be supervised.
• Avoid dropping the mobile hotspot or battery. If the mobile hotspot or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.
• Improper battery use may result in a fire, explosion or other hazards.
• The maximum operating temperature is 40°C.

Note: The battery shall only be serviced by the manufacturer.

CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries in accordance with local regulations. Risk of fire and burns. Do not open, crush, heat above 60°C or incinerate. Follow manufacturer’s instructions.

Cleaning and Maintenance

The Product, the battery and the charger are not waterproof. Do not use them in places with high humidity like a bathroom and also avoid spilling any liquids on the Product, battery or charger. Use a soft cloth to clean the Product, the battery, and the charger. Do not use alcohol, diluted liquid or benzene to clean the Product.

Disposal of Product and Batteries

Follow local regulations regarding the disposal of mobile devices and batteries. In some areas, the disposal of these items in the household or business trash may be prohibited. Please follow your local regulations and recycle Products if required Batteries must be recycled or disposed of properly.

Certification Information (RoHS)

We at Orbic take our social responsibility seriously and are committed to the cause of serving our environment. It is in keeping with these commitments that we are proud to state that Orbic mobile hotspots are RoHS compliant.

FCC SAR Warning

This model mobile hotspot meets the government’s requirements for exposure to radio waves.
This mobile hotspot is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:

The exposure standard for wireless mobile hotspots employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating (10 mm) positions accepted by the FCC with the mobile hotspot transmitting at its highest certified power level in all tested frequency bands. The SAR guideline includes a considerable safety margin designed to assure the safety of all persons regardless of age and health.
The FCC has granted an Equipment Authorization for this model mobile hotspot with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model mobile hotspot is on file with the FCC and can be found under the Display Grant section of https://www.fcc.gov/oet/fccid after searching on:
FCC ID: 2ABGH-RC400LX or at http://www.orbic.us/

IC SAR Warning

This device has been tested for compliance with IC SAR values at a typical operation near the body. To ensure that RF exposure levels are below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 10 mm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.

FCC Statement

This Product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This Product may not cause harmful interference.
2. This Product must accept any interference received, including interference that may cause undesired operation.

NOTE 1

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This Product generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the Product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2

Orbic or the manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to the Product. Such modifications could void the user’s authority to operate the equipment.
Data transmission is always initiated by software, which is then passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.

IC Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference.
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

ORBIC LIMITED WARRANTY

WHO THIS WARRANTY COVERS

• This 12-month limited warranty extends only to the original purchaser of this product within the United States. This warranty is not transferable. This warranty is conditioned upon the proper use of the Product.

WHAT THIS WARRANTY COVERS

Orbic offers you a limited warranty that extends for the first twelve (12) month period to the original purchaser from the date of the original purchase with proof of purchase. Without valid proof of purchase, Orbic offers a limited warranty extending fifteen (15) months from the date of manufacture, which is coded on the product label (“Warranty Period”). Should the Product, inbox accessories, or any part during normal consumer usage and conditions be proven defective in material or workmanship that results in Product failure, such defect(s) will be repaired or replaced (with new or rebuilt parts) at Orbic’s discretion, without charge for parts or labor directly related to the defect?

WHAT THIS WARRANTY DOES NOT COVER

1. Warranty claims outside of the Product Warranty Period.
2. Damage or defects caused by using the Product other than in the normal course.
3. Defects or damages resulting from accident, misuse, abnormal use, abnormal conditions, improper storage, unauthorized modifications, unauthorized repair, improper installation, or other acts which are not the fault of Orbic.
4. Defects or damage resulting from excessive force or use of a metallic object when pressing the touch screen.
5. Product with altered, defaced, or removed serial number.
6. Damage resulting from use of accessories not approved by Orbic.
7. Damage from exposure to moisture, humidity, excessive temperature or extreme environment.
8. Liquid damage due to not properly sealed/locked accessories, ports, and or battery latches of water resistance devices.
9. All surfaces and externally exposed parts that are scratched or damaged due to normal customer use.
10. All software, including operating system software, third-party software, applications, and all other software of any kind.
11. Damage caused by ordinary wear and tear of the Product.
12. Customer abuse or other physical abuse or mistreatment of Product as evidenced by:

• Missing required faceplate;
• Damaged LCD or Lens (e.g., the product is either broken, cracked, smashed, bleeding, etc.;
• IMEI is unreadable electronically or due to missing or altered serial number, IMEI and/or reliance date label so as to affect readability;
• Missing keys beyond normal wear and tear;
• Unapproved Product modification;
• Visible Product surface physical damage resulting in the product being smashed, chewed, gouged, burned or melted;
• Liquid damage as evidenced by submission in liquid or any other evidence of liquid ingress, including corrosion of any of the connections and noticeable excessive residue.

WHAT ARE THE LIMITS OF ORBIC’S LIABILITY

THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF ORBIC’S RESPONSIBILITIES AND THE EXCLUSIVE REMEDY REGARDING THE PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL ORBIC BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS, OR SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM THE USE OR INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU. ORBIC MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY THIRD- PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT DISTRIBUTED BY ORBIC OR OTHERWISE. RESPONSIBILITY FOR THE QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE, AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY WITH THE USER AND THE DIRECT VENDOR, OWNER, OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.

Nothing in the Product instructions or information shall be construed to create an express warranty of any kind with respect to the Product. No agent, employee, dealer, representative or reseller is authorized to modify or extend this Limited Warranty or to make binding representations or claims, whether in advertising, presentations or otherwise, on behalf of Orbic regarding the Product or this Limited Warranty. This Limited Warrant gives you specific legal rights and you may also have other rights that vary from state to state.

WHAT ARE THE PROCEDURES FOR RESOLVING DISPUTES?

ALL DISPUTES WITH ORBIC ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND NOT BY A COURT OR JURY. Any such dispute shall not be combined or consolidated with a dispute involving any other person’s or entity’s products or claim and, specifically, without limitation of the foregoing, shall not under any circumstances proceed as part of a class action. The arbitration shall be conducted before a single arbitrator, whose award may not exceed, in form or amount, the relief allowed by applicable law. The arbitration shall be conducted according to the American Arbitration Association (AAA) Commercial Arbitration Rules applicable to consumer disputes. This arbitration provision is entered pursuant to the Federal Arbitration Act. The laws of the State of New York, without reference to its choice of laws principles, shall govern the interpretation of the Limited Warranty and all disputes that are subject to this arbitration provision. The arbitrator shall decide all issues of interpretation and application of this arbitration provision and the Limited Warranty. This arbitration provision also applies to claims against Orbic’s employees, representatives and affiliates if any such claim arises from the Product’s sale, condition or performance.

HOW TO GET WARRANTY SERVICE

To obtain warranty service, please call the following telephone number from anywhere in the continental United States:

• TEL: 1-877-872-4555

References

• Orbic
• Orbic
• Orbic
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>